Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Colton, CA | Workshop Contractors
We provide independent KraftMaid cabinet installation, refacing, and full kitchen remodeling across Colton’s 92324 corridor as your Colton General Contractor. What makes our KraftMaid work different here is that we understand how these semi-custom boxes behave after decades inside post-WWII stucco-on-slab tract homes, where Santa Ana grit and 100°F summer heat work on thermofoil doors and settled slabs rack cabinet runs out of square. We’re an independent provider; we are not authorized, affiliated, or endorsed by KraftMaid. Call (844) 384-3361 for a free estimate on KraftMaid service in Colton.
Why Colton Residents Choose Us for KraftMaid Service
Noel Figueroa learned framing on job sites across the Inland Empire before he was old enough to rent a truck, and he has spent the decades since working on everything from ground-up residential builds to full commercial tenant improvements. That background matters when we open a KraftMaid cabinet run in a 1960s Colton tract house and find the slab has moved, because the fix isn’t just new doors; it’s re-leveling, re-anchoring, and making the boxes square again before anything cosmetic happens.
We carry KraftMaid OEM hinges, glides, and touch-up finishes where the series is still supported, and we’re honest when an aftermarket part is the only option. We source and we install, which means the person who specs the hardware is the same person who hangs the door. For KraftMaid sales & service, that single point of accountability is what keeps a kitchen remodel from turning into a blame game between cabinet supplier and installer.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Colton
- Thermofoil skin lift on sun-facing runs. KraftMaid Prelude thermofoil and laminate door skins delaminate at the edges when Colton summers push afternoon heat past 100°F against west and south walls. We see it most on cabinet runs where the afternoon sun pounds the stucco exterior and heat builds behind the door. The fix is either re-skinning doors that are still square, or replacing fronts when the core has warped.
- Grit-fouled drawer glides after Santa Ana events. Wind-blown dust off the Cajon Pass works its way into soft-close dampers and hinge plates every October through December. Drawers bind before the boxes fail, and most of what we repair is hardware that never got cleaned and re-lubricated after a bad wind season.
- Sink-base and dishwasher-adjacent box swelling. In Colton’s post-WWII slab homes, cabinet backs often sit tight to exterior stucco walls with no vapor barrier. Under-sink leaks go unnoticed, the box swells, and by the time the homeowner sees it, the face frame has delaminated. We replace the box and seal the wall before reinstalling.
- Racked boxes on settled slabs. Original KraftMaid framed boxes in 1960s – 1980s tract kitchens go out of square as slabs settle. Doors rack, reveal lines open up, and the hardware still works fine. Re-leveling the run beats replacing it most of the time.
- Discontinued door styles on older Momentum and Portrait runs. Some KraftMaid series from the 1990s and early 2000s are no longer supported. When an OEM door front is discontinued, we match the profile and finish with a quality replacement rather than forcing a full kitchen teardown.
KraftMaid Service in Colton: What Local Conditions Mean for Your Equipment
Colton’s housing stock is overwhelmingly single-story stucco-on-slab tract construction from the post-WWII boom through the 1980s, and most KraftMaid kitchens we open here are original builder installations sitting on concrete that has had four or five decades to move. That means the cabinet run itself has often shifted, not just the doors. In a 1960s tract kitchen off the 92324 corridor, we opened a KraftMaid Portrait run whose thermofoil door skins had lifted along the sun-baked south wall and found the base boxes had pulled off plumb as the slab settled. We shimmed and re-anchored the cabinet run, replaced the failed door fronts and worn glides, and reset the countertop so the sink base sealed tight against the exterior stucco wall. That job is the rule here, not the exception. A contractor who only hangs new doors on that run would have left a crooked box behind them, and the doors would have started binding again within a year.
KraftMaid Models & Products We Service in Colton
We work on the full KraftMaid cabinet lineup that Colton homes actually have. KraftMaid Momentum is the full-access, all-plywood frameless line we install most often in new and remodeled Colton kitchens. KraftMaid Portrait is the framed, full-overlay series we see in older tract homes and garage conversions. We also service KraftMaid Prelude thermofoil and laminate door programs, which are the ones most vulnerable to Colton’s heat cycle.
We match KraftMaid OEM hinges, glides, and touch-up finishes where the series is still supported, and we use quality aftermarket hardware only when an OEM part is discontinued. When you call us, we’ll tell you plainly whether your existing boxes are worth refacing or whether replacement makes more sense. We stock common KraftMaid hardware locally so Colton turnaround is measured in days, not weeks.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Colton
Here’s what KraftMaid cabinet and kitchen work typically costs around Colton, based on the scope and condition of your existing boxes:
| Service | Typical Colton Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives cost in Colton is what’s hiding behind the cabinets: slab settlement, stucco walls with no vapor barrier, and old plumbing that may need attention before new boxes go in. A free estimate includes checking the cabinet run for square, looking at the wall condition behind the boxes, and confirming whether your KraftMaid series still has OEM support. Call (844) 384-3361 to schedule yours.
Serving Colton, CA — Our Local Coverage Area
We’re based in the Colton area and know this community well, with Highgrove KraftMaid service available nearby. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Colton
Sometimes. If the door core is still square and the thermofoil has lifted only at the edges, we can often re-skin the doors or use a heat-set adhesive to re-bond the laminate. But if the substrate has warped from years of 100°F+ afternoon heat, replacement fronts are the honest fix. We’ll tell you which one your doors qualify for. Call (844) 384-3361 and we’ll take a look at no charge.
Yes. Wind-blown grit and dust off the Cajon Pass gets into hinge plates and soft-close dampers on drawer glides, and after a bad fall wind season, drawers start to bind. We see it every year in October through December. Cleaning and re-lubricating the hardware fixes most cases before the boxes themselves fail, and we recommend a post-wind-season hardware service on any Colton kitchen that sits near an open corridor, including our KraftMaid service in Rubidoux.
Because the slab under the house has settled. Most Colton homes are post-WWII tract construction on concrete slabs, and four or five decades of soil movement is enough to rack an original KraftMaid run out of square. The hardware is often fine; the box has moved. We re-shim and re-anchor the run before anything else, because new doors on a crooked box will bind again.
In many cases, yes. If the boxes are sound, square, or correctable to square, refacing gives you new doors, drawer fronts, and hardware at a fraction of full replacement cost. We can reface with KraftMaid door fronts where the series is still supported, or match the profile with a quality aftermarket option if it’s not. Bring us the cabinet dimensions and we’ll give you both prices side by side.
Yes, and this is one of the most overlooked parts of a Colton KraftMaid remodel. In post-WWII slab homes, cabinet backs often sit tight against exterior stucco with no vapor barrier, and that wall can hide moisture, old termite damage, or plumbing issues from the original build. We check it before we hang new boxes. If there’s a problem, we fix it then, not after your new cabinets are up.
Service Areas Near Colton
We serve Colton and the surrounding Inland Empire communities. If you’re in Colton service area, we cover the 92324 corridor including the neighborhoods along the I-10 and 215. We also provide KraftMaid service in Grand Terrace and KraftMaid service in Villa Park, along with Loma Linda, Woodcrest, and the broader San Bernardino and Riverside metro.
Book Your KraftMaid Service in Colton Today
Build it right the first time. The second time costs twice as much and nobody’s happy about it. Call (844) 384-3361 to schedule your free KraftMaid estimate in Colton, and we’ll figure out exactly what your cabinets need, what it costs, and whether refacing or replacement makes sense for your home, including KraftMaid repair in Loma Linda if you’re in that area.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Colton since the early days of his Inland Empire contracting career.