Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Construction in Millbrae, CA | Workshop Contractors
Workshop Contractors provides independent Delta faucet, shower valve, and plumbing fixture service across South San Francisco and Millbrae, CA. We work on the Delta equipment actually installed in this city’s postwar ranch and tract homes, and we’re not beholden to any factory program or authorized-dealer pitch. The single biggest difference here: nearly every Millbrae remodel runs through the city’s own planning counter and, when a roof penetration is involved, SFO’s height and noise review. That changes how we plan, sequence, and price bathroom and addition work. Call (844) 384-3361 to get a free estimate on your Delta service in Millbrae.
Why Millbrae Residents Choose Us for Delta Service
Most of the homes we open up in Millbrae were built between 1940 and 1965. That means the Delta fixture behind your shower wall is likely a Monitor-era valve, not a new MultiChoice body. We know what those valves look like after twenty years of peninsula water. We know which cartridges seize, which trim finishes corrode first, and which rough-ins were never meant to be serviced without cutting the wall open.
Noel Figueroa runs Workshop Contractors. He grew up on a street where the tradesmen who framed the houses also handed him his first hammer, trained at Chaffey College’s construction technology program, and has spent years on job sites where the work either holds up under a second look or it doesn’t. That’s the standard we bring to every Delta fixture we touch in Millbrae. We also work directly with Delta sales & service channels to keep OEM parts moving when a cartridge or trim kit is back-ordered. That matters when your shower is apart and you want water back on.
Our bias is simple: we recommend the fix that fits your wall cavity, your water chemistry, and your budget. If a $60 cartridge rebuild is the honest answer, we say so. If a 1960s valve body is corroded through, we say so too.
Styles & brands we work with
Common Delta Construction Problems We Solve in Millbrae
- Seized Monitor pressure-balance cartridges. Millbrae’s water carries enough mineral content that a Monitor 1300 or 1400 series cartridge left untouched for years will lock up or lose temperature control. We pull the cartridge, check the seats and springs, and replace with OEM Delta parts when the fixture is staying.
- Builder-grade Delta kitchen faucets that clog after remodel re-pressurization. When older galvanized supply lines get drained and re-pressurized during a kitchen remodel, sediment breaks loose and finds its way into pull-down diverters and aerators. We see this constantly in Millbrae’s 1940s-60s housing stock, where the original plumbing is still in the wall.
- Corroded chrome and brushed-nickel trim on Delta shower valves. Salt-laden air off the bay and Pacific accelerates pitting on Delta trim, especially in Millbrae bathrooms with poor exhaust. A valve body can be mechanically fine while the trim above it looks wrecked. We quote trim-only replacements when the rough-in still tests clean.
- Failed solder joints and seat seals behind 1960s tile surrounds. When a Millbrae tub-to-shower conversion opens a wall that was never designed to be serviced, we routinely find the original Delta rough-in weeping at the joints. That’s the moment to stop, show you what’s there, and talk honestly about replacing the rough-in instead of rebuilding a valve that won’t hold.
- Mismatched trim on MultiChoice rough-ins installed during 1990s-2000s additions. Millbrae’s second-story additions and bump-outs from that era often have a MultiChoice rough-in hiding behind the tile with a cheap trim kit on the front. When the trim fails or the homeowner wants a curbless shower, we swap the trim, upgrade the cartridge, and leave the rough-in if it passes a pressure test.
Delta Service in Millbrae: What Local Conditions Mean for Your Equipment
Millbrae sits directly in the flight path and height-review zone tied to SFO. That one fact changes what a bathroom remodel here actually costs and how long it takes to permit. An addition or second-story bath remodel that adds a rooftop vent stack, skylight, or roof-mounted exhaust fan can pull airport-referenced height and noise attenuation review. A same-size bathroom project in neighboring Burlingame or San Bruno generally won’t. We know how to route venting and exhaust through the roof so the SFO review clears before inspection. That’s not a detail you want to learn about after the rough-in is framed and the inspector flags your penetration.
This is also why we plan Delta shower valves and tub-to-shower conversions around the full envelope. On the flat streets near downtown and the BART/El Camino corridor, lots are tight and homes sit close to the property line. Venting a new shower properly sometimes means going through a roof section that falls under SFO’s review. We sequence the plumbing, the roofing, and the permit package together so one trade doesn’t paint another into a corner.
Delta Models & Products We Service in Millbrae
We service the Delta Monitor 1300 and 1400 series single-handle shower valves common in Millbrae’s 1980s-2000s tract and remodel baths. We also work on Delta Foundations and Classic single-handle kitchen and lav faucets installed as builder-grade during mid-century remodels, along with the MultiChoice Universal rough-in valves behind tiled tub surrounds in 1990s-2000s additions. On the trim side, we see a lot of Delta Lahara and Windemere collections in Millbrae whole-house remodel updates.
On any fixture that’s staying, we use OEM Delta cartridges, seats, springs, and trim. If OEM is discontinued or back-ordered, we’ll offer a quality aftermarket alternative and tell you why. If a valve body is cracked or corroded through, we say so plainly and quote a new MultiChoice rough-in instead of selling a rebuild that won’t hold. On a 1960s Millbrae wall, that’s often the honest answer. We keep common Delta cartridges and rebuild kits moving through local supply channels so Millbrae jobs don’t stall waiting on a part from across the country.
See the difference
Before
After
Before
After
Before
AfterDelta Service Pricing in Millbrae
What you’ll pay depends on what’s behind the wall, not just what’s on the front of the valve. A cartridge replacement on an accessible Monitor valve is a short, affordable job. A tub-to-shower conversion on a 1950s Millbrae bathroom with a failed rough-in, soft tile surround, and an SFO-referenced roof penetration is a full remodel. Here are the ranges we work within for Millbrae:
| Service | Typical Range |
|---|---|
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
A free estimate includes us actually looking at the valve, the wall, and the vent path. No guesswork from a photo. Call (844) 384-3361 and we’ll schedule a time to open the access panel or pull the trim and tell you what’s really in there.
Serving Millbrae, CA — Our Local Coverage Area
We’re based in the Millbrae area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Delta Construction in Millbrae
If the valve body is sound and the original rough-in is a serviced design, we can often replace just the cartridge and seat springs. But on a 1950 Millbrae wall, we won’t know until the trim comes off. If the body is corroded or the solder joints are weeping, rebuilding it is throwing money away. We’ll show you what we find and quote the honest fix. Call (844) 384-3361 for an exact quote after we look at it.
It can, if the remodel adds a rooftop vent stack, skylight, or roof-mounted exhaust on a second story or addition. Millbrae is in SFO’s flight path and height-review zone, so roof penetrations that would sail through in Hillsborough or San Bruno can draw airport-referenced review here. We route venting and exhaust to clear that review before inspection.
Millbrae’s water carries minerals, and the salt-laden air off the bay and Pacific adds corrosion stress on trim and exposed components. A cartridge that would run fine in a city with softer water can seize or lose temperature control here after years of mineral buildup. We see it on Monitor valves across Millbrae’s postwar homes. The fix is a fresh OEM cartridge and, if the trim is pitted, new trim to match.
Sometimes. If the existing Delta rough-in is a MultiChoice body that tests clean and sits at the right height for a shower, we can keep it and swap the trim and cartridge. If the valve is a seized Monitor with a soldered body or the wall is already open and the rough-in is compromised, moving to a new MultiChoice rough-in is the better call. We’ll show you why. Call (844) 384-3361 and we’ll walk the bathroom with you.
No. Workshop Contractors is an independent general contractor in Millbrae. We are not a Delta-authorized dealer and we are not affiliated with Delta Faucet Company. Our only bias is toward the fix that fits your wall cavity and your water. That independence is why we’ll tell you when a rebuild makes sense and when a replacement rough-in is the honest answer.
Service Areas Near Millbrae
We serve Millbrae and the surrounding peninsula cities and neighborhoods. If you’re in Millbrae service area or nearby, we can usually get to your job quickly. We also provide Delta service in Moss Beach for coastal homes dealing with heavier salt exposure, and Delta service in San Bruno for homeowners on the other side of the hills.
Book Your Delta Service in Millbrae Today
If you have a Delta valve that won’t hold temperature, a tub you want gone, or a shower wall that’s gone soft behind the tile, we’ll come look at it. Call (844) 384-3361 to schedule your free estimate in Millbrae, CA.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Millbrae and the surrounding peninsula.