Owens Corning Construction in Ben Lomond, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Owens Corning Construction in Ben Lomond, CA | Workshop Contractors

We’re an independent general contractor serving Ben Lomond and the Highway 9 corridor, and we specify and install Owens Corning roofing systems on the merits, not on a badge. What makes our Owens Corning work different here comes down to one fact: Ben Lomond roofs fail because of redwood canopy, slope movement, and wind-driven rain, not just age. If you need Owens Corning shingles installed, repaired, or replaced on a mountain lot, call (844) 384-3361 for a free estimate.

Call (844) 384-3361

We’re not affiliated with or authorized by Owens Corning. We’re a licensed general contractor who has torn off and installed enough of their shingle lines across the Santa Cruz Mountains to know exactly how Oakridge, Duration, and WeatherGuard perform under these conditions, from Owens Corning in Lompico to the ridgeline communities above. Ben Lomond’s steep, wooded lots and Cal Fire WUI requirements change how a roof gets built. We plan for that from the first measurement.

Why Ben Lomond Residents Choose Us for Owens Corning Service

Noel Figueroa, our owner and general contractor, learned framing and finish work from the same generation of tradesmen who built half the houses on his street in Ontario. He’s carried that standard into the Santa Cruz Mountains, where a roof isn’t just a roof. It’s the first line of defense against atmospheric-river winters and the first thing a Cal Fire inspector looks at. In Ben Lomond, our crews have worked on mid-century mountain cabins, redwood-era homes on post foundations, and custom builds cut into slopes where a standard delivery truck can’t turn around.

We use genuine Owens Corning shingles, underlayments, and accessory components matched to the roof system so the warranty documentation holds. When a repair makes sense, we patch with matching material rather than pushing a tear-off you don’t need. And when the deck, flashing, or venting is at end of life, we tell you straight: a replacement is the right call. One contractor, every trade. From the roof down to the pavers, we handle it.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common Owens Corning Construction Problems We Solve in Ben Lomond

  • Shade and canopy moisture damage. Redwood-shaded roof planes in Ben Lomond stay damp for weeks after winter rains. Owens Corning shingles on these sections develop algae streaking, granule loss, and moss growth well before their nominal life. We see Oakridge and older Duration fields where the north and east slopes are nearly bare while sun-exposed sections look almost new. The fix isn’t just replacing shingles. It’s addressing drainage and ventilation so the replacement doesn’t rot the same way.
  • Wind-driven rain at valleys and flashing. Atmospheric-river storms push water sideways into valley metal and step flashing on steep mountain roof planes. Sealant strips fail at these intersections first. We regularly find bent valley flashing and water-stained decking on Ben Lomond homes after a single wet winter, even when the shingle field itself still has years left.
  • Fastener back-out from deck movement. Older redwood-era homes in Ben Lomond sit on pier-and-beam or post foundations that flex with soil moisture changes. That movement backs nails out of Owens Corning shingle fields over time, opening gaps at ridges and soffits. A roof that looks fine from the ground can have dozens of lifted shingle tabs once you get up on it.
  • Ember entry at vents and eaves. Standard ridge, soffit, and gable vents installed years ago don’t meet current WUI ember-resistant requirements. Cal Fire inspections in Ben Lomond flag these frequently, especially on older Duration installs. Upgrading venting while we have the roof opened up saves a second inspection and a second mobilization.
  • Slope movement showing up as roof failure. Homes on the uphill side of Highway 9 in Ben Lomond deal with saturated redwood-rooted slopes that move after big winter rains. That movement telegraphs through the structure as shingle and flashing failures at the roof-to-wall intersection. We coordinate roof repairs with retaining wall and drainage work so the underlying cause gets addressed, not just the symptom.

Owens Corning Service in Ben Lomond: What Local Conditions Mean for Your Equipment

Here’s what most contractors from over the hill miss. Ben Lomond lots on the uphill side of Highway 9 frequently need engineered retaining walls and drainage before or alongside roof and structure work. Saturated redwood-rooted slopes above the property move after big winter rains, and that slope movement shows up as shingle and flashing failures on the homes below. We’ve torn off Owens Corning roofs in Ben Lomond where the shingle damage looked like ordinary wind wear until you walked the foundation and realized the uphill corner had settled half an inch, a pattern we’ve also seen on Brookdale Owens Corning service calls. You don’t fix that with shingles. You fix it with drainage, retaining walls, and then a properly installed roof on a stable structure. That’s the sequencing most flatland builders never think about.

On a redwood-shaded cabin off Highway 9 on the uphill side of town, we tore off a failing Oakridge roof that had been streaking with algae and losing granules for years. The valley flashing was bent and the deck was soft from a wet winter. We replaced the rotted sheathing, installed ice-and-water shield at the valleys and eaves, upgraded the ridge and soffit vents to ember-resistant units for the WUI inspection, and set a new Duration architectural shingle field. Then we coordinated a gutter and downspout run so storm water pushes away from the slope rather than back into the foundation. That’s the kind of integrated repair Ben Lomond roofs actually need.

Owens Corning Models & Products We Service in Ben Lomond

We install and repair the full Owens Corning architectural line: Oakridge, including the Estate-style profiles, Duration Premium and Duration Designer in colors like Onyx Black and Driftwood, and Duration Cool for exposed west-facing planes that take full afternoon sun. On older Ben Lomond cabins, we still service Supreme and WeatherGuard 3-Tab roofs, and we’ll tell you honestly when those have outlived their useful life. Our Owens Corning sales & service work uses genuine shingles and accessories matched to the roof system. We keep common replacement components staged nearby so Ben Lomond repairs don’t wait on a San Jose supplier’s delivery schedule.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Owens Corning Service Pricing in Ben Lomond

Here’s where Ben Lomond Owens Corning work lands, price-wise:

Service Price Range
Roof Replacement $8,000 – $20,000
Roof Repair $400 – $1,800
Emergency & Storm Damage $400 – $1,800

What drives the number on a Ben Lomond job: roof pitch and access (steep lots with narrow private driveways add staging time), deck condition (older cabins often need sheathing replacement), WUI vent upgrades, and whether drainage or retaining work has to happen alongside the roof. A free estimate includes a written line-item scope so you know exactly what you’re paying for. Call (844) 384-3361 to schedule one.

Serving Ben Lomond, CA — Our Local Coverage Area

We’re based in the Ben Lomond area and know this community well, and we also run Owens Corning service in Felton. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.

FAQs – Owens Corning Construction in Ben Lomond

Service Areas Near Ben Lomond

Beyond Ben Lomond, we work across the Santa Cruz Mountains and into the Bay Area foothills: Boulder Creek, Felton, Scotts Valley, Bonny Doon, and Lompico. You can see our Ben Lomond service area details, or if you’re over the hill, check Owens Corning service in Bonny Doon and Owens Corning service in Cambrian Park.

Book Your Owens Corning Service in Ben Lomond Today

If your Owens Corning roof is streaking, lifting, or leaking, call (844) 384-3361. We’ll get on the roof, give you an honest assessment, and price the fix in writing. Build it right the first time. The second time costs twice as much and nobody’s happy about it.

Written by Noel Figueroa, Owner at Workshop Contractors, serving Ben Lomond and the Santa Cruz Mountains.

Need Construction help in Ben Lomond? Licensed & insured · Free in-home estimates response · free estimates
Call (844) 384-3361
Areas We Serve

Request a Free Estimate in Ben Lomond

Tell us what you need — Workshop Contractors responds fast. No obligation.

By sending this request, you confirm you have read our Privacy Policy and agree to be contacted by telephone, text message, or email about your request, including by the independent professionals who may fulfill it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch