Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Banning, CA | Workshop Contractors
We’re an independent construction crew in Banning that installs, repairs, and replaces PGT windows and doors every week. The short version: we know how PGT vinyl and aluminum lines actually hold up against the San Gorgonio Pass wind, the blowing sand, and the 100-degree summers because we’ve pulled failed units off Banning walls and put new ones back on. We’re not authorized by PGT, and we don’t need to be. What we bring is hands-on experience with these exact products in this exact climate. Call (844) 384-3361 for a free estimate.
Why Banning Residents Choose Us for PGT Service
Most contractors in the Inland Empire treat PGT windows like any other window. We don’t, because a PGT unit on a west-facing Banning wall is doing a different job than the same unit on a sheltered east wall in Beaumont. Noel Figueroa, our owner and general contractor, learned framing from the tradesmen who built half the houses on his street in Ontario. He’s spent decades working the Inland Empire, and he’ll tell you the same thing we tell every Banning homeowner: the product matters less than the installation and the flashing around it. That’s why we use PGT OEM replacement sashes, glazing, gaskets, and hardware wherever a unit is still serviceable. If the frame or corner welds are compromised, we say so plainly. A full-frame replacement usually costs less over ten years than chasing seal and corner failures on a tired unit, and we’d rather give you that math upfront than sell you a patch job that fails next spring.
Styles & brands we work with
Common PGT Construction Problems We Solve in Banning
- Wind-driven sand pitting on west-facing vinyl frames. Sand off the San Gorgonio Pass acts like a low-grade sandblaster. We see PGT vinyl frames and sash faces on west elevations with the finish dulled and the substrate starting to show within a few years. That’s a Banning problem, not a PGT defect, and it changes how we spec the finish and the fastening.
- Dried-out glazing gaskets and weatherstrip. Sustained UV and heat over 100°F shrink PGT gaskets faster here than in coastal cities. The result is drafts, whistling at the corners, and water intrusion at the sill. We replace the gaskets with OEM material and re-seat the sash so the seal actually compresses.
- Cracked or gapped mitered corners on older PGT vinyl sashes. Years of thermal cycling plus 40-mph gusts flexing the unit will eventually crack the corner welds. Once that corner opens up, the sash loses its structural integrity and the window starts moving in the frame. We replace the sash or the full unit, depending on what we find.
- Impact-rated PGT units with uplift movement. We frequently find original installs on exposed Banning slopes with light fastening and thin flashing at the rough opening. The window itself is fine, but it’s moving in the wall under gust load. We reframe, re-flash, and set the unit with heavier fastening.
- Leaking sliding glass doors on the pass side. PGT WinGuard sliders are solid products, but the track and weep system has to be installed level and clear of sand. Banning’s sand load means the weeps clog fast, and a clogged weep system sends water over the interior track. We clear, re-level, and re-flash the opening.
PGT Service in Banning: What Local Conditions Mean for Your Equipment
Here’s what we know from working in Banning that a generic PGT page won’t tell you. The west- and pass-facing elevations of your house take the brunt of afternoon gusts that routinely exceed 40 mph, and those gusts don’t act alone. They carry fine sand off the pass that abrades the vinyl finish, and they hit the window at the same time the unit is already heat-stressed from a full day of desert sun. That combination means a PGT window on a west-facing wall in Banning needs heavier fastening and more careful flashing than the same window on a sheltered east wall or in a calmer city. We account for wind uplift in how we fasten the rough opening, and we flash the head and sill so water and sand don’t get behind the flange. Contractors who work mostly on the Coachella Valley floor don’t plan around this because they don’t have to. We do, every time we set a unit on a west wall in Banning. On a 1980s wood-frame stucco tract house out near Sun Lakes, our crew replaced a set of west-facing PGT vinyl single-hungs where the sashes had cracked at the corners and the gaskets were dried out and whistling in the afternoon gusts. We found the original install had light fastening and thin flashing at the rough opening, so we reframed and flashed the openings, then set new PGT impact-rated units with upgraded fastening. The whistling and sill leaks stopped the same day.
PGT Models & Products We Service in Banning
We work on the full PGT line you’re likely to have in Banning: WinGuard vinyl impact windows and sliding glass doors, WinGuard Aluminum impact windows and doors, the Series 2200 and 2300 vinyl single-hung and sliding windows that came standard on a lot of local tract homes, and the Premier and Architectural door systems. For parts, we use PGT OEM replacement sashes, glazing, gaskets, and hardware wherever the unit is still serviceable. We only turn to quality aftermarket parts when OEM pieces are discontinued or back-ordered, and we’ll tell you which one you’re getting and why. We keep common OEM PGT hardware and gaskets on hand for fast service in the 92220 area, so a lot of Banning repairs don’t wait on a parts truck from the distributor. If you’re not sure which PGT line you have, we can identify it during the estimate. For homeowners looking at full window replacement, check out our PGT sales & service page for the range of lines we install.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Banning
What you’ll pay depends on how many units you’re replacing, whether they’re impact-rated WinGuard or standard Series 2200/2300 stock, and what condition the rough openings are in. If the framing and flashing are solid, it’s mostly labor and the unit. If we’re reframing and re-flashing a west-facing wall that’s been taking wind and sand for 20 years, the scope changes. Here’s what we typically see in Banning:
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Home Addition | $45,000 – $130,000 |
Every estimate includes a written line-item quote, so you know exactly what you’re paying for before we touch the wall. Call (844) 384-3361 and we’ll walk the property and give you numbers that match your actual Banning situation, not a brochure price.
Serving Banning, CA — Our Local Coverage Area
We’re based in the Banning area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Banning
Yes, with the right installation. PGT’s vinyl and aluminum lines are engineered for impact and wind load, but the weak point in Banning is almost never the window itself. It’s the fastening and flashing at the rough opening. A properly fastened and flashed PGT unit will take 40-mph pass gusts for years. A light install will flex, whistle, and eventually leak, usually at the sill. We upgrade the fastening and flashing on every west-facing install we do here. Call (844) 384-3361 if you want us to inspect how yours were set.
The whistle is almost always dried, shrunken glazing gaskets. Banning’s low humidity and 100-degree heat dry out the weatherstrip faster than PGT’s warranty assumes, and once the gasket loses compression, wind gets through the gap and water finds the sill. The fix is replacing the gaskets with OEM material and re-seating the sash, unless the sash corners are cracked too, in which case the sash or the full unit needs to go. We’ll tell you which one it is during the estimate.
Usually, yes. If you have Series 2200 or 2300 single-hungs or sliders, we can match the line and the finish on the addition so the new work doesn’t look like an afterthought. For older windows that are no longer in production, we’ll find the closest current PGT line and walk you through the difference. If we’re doing a full home addition with PGT windows, we spec the units at framing so the rough openings are sized right from the start.
For west- and pass-facing walls, we’d say yes, even if you’re not in a designated fire zone. WinGuard’s impact rating means the glass and frame are built to take wind-blown debris, and in Banning the debris is real: rocks, sand, and tree limbs move fast in a 40-mph gust. Impact-rated units also resist the flex that cracks standard vinyl corner welds over time. You pay more upfront, but you’re buying a window that doesn’t fight the local wind. If it doesn’t fit your budget, we can do standard PGT units with upgraded fastening instead.
For common OEM parts like gaskets, sashes, and hardware on current PGT lines, we usually have them in hand or within a couple of days. Discontinued lines sometimes take longer because the part has to come from a distributor’s remaining stock, and we won’t promise a date we can’t hit. We’ll tell you the real lead time when we order the part. Call (844) 384-3361 and we’ll check availability for your specific unit.
Service Areas Near Banning
Workshop Contractors serves Banning and the surrounding communities across the San Gorgonio Pass and the Inland Empire. If you’re nearby, we also work in Woodcrest, Loma Linda, and Orange, and we offer PGT service in Valle Vista and PGT service in Temecula. Our full coverage area is on the Banning service area page.
Book Your PGT Service in Banning Today
If your PGT windows are whistling, leaking, or showing sand damage on the west side of your Banning house, don’t wait until the sill rot spreads. Build it right the first time. The second time costs twice as much and nobody’s happy about it. Call (844) 384-3361 to schedule your free estimate.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Banning and the Inland Empire since 2005.