Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Highgrove, CA | Workshop Contractors
We provide independent PGT sales, installation, and repair across Highgrove’s 92313 ZIP code. We work on PGT WinGuard vinyl and aluminum impact units, plus their architectural single-hung and casement lines, and we handle everything from full window replacements to sash-only fixes and patio door rebuilds. What separates our PGT work in Highgrove from anywhere else: we know these units, and we know what’s buried under the old citrus lots they sit on. Call (844) 384-3361 for a free estimate, and we’ll get eyes on your openings.
Why Highgrove Residents Choose Us for PGT Service
Highgrove’s housing runs older than a lot of the Inland Empire, 1950s through 1970s ranch homes and farmworker cottages on big lots, and a lot of those houses got PGT units installed during remodels over the years. Those windows and sliders have been baking in high Inland sun and taking Santa Ana wind for decades, much like the Colton PGT service areas we also cover. We know what that does to a vinyl weld and an aluminum track.
Noel Figueroa, our owner, grew up in Ontario’s Vineyard neighborhood and learned framing and finish work before he ever took a PGT sash out of a rough opening. He’s spent his working life across the Inland Empire, and he treats a window opening the way he treats framing: it either lines up, or it gets done again. We’re an independent contractor. Not authorized by PGT, not endorsed by PGT, and we don’t sell you a full replacement when a roller swap fixes the drag.
We carry OEM PGT sashes, rollers, weatherstripping, and glazing for the units worth saving, and we match quality aftermarket hardware when OEM is discontinued or priced past reason. When the frame or the sealed glass is gone, we’ll tell you straight that re-glazing or full-frame replacement is the only fix that holds.
One contractor. Every trade. If your PGT window work is part of a bigger project, a Highgrove service area remodel, an addition, a kitchen that’s getting new openings, we scope it all under one contract instead of forcing you to coordinate a window crew and a framer and a stucco patch crew separately.
Styles & brands we work with
Common PGT Construction Problems We Solve in Highgrove
- Cracked vinyl sash corners on PGT WinGuard units. Highgrove summers push past 100°F, and nights drop hard. Years of that thermal cycling stress the welds at the vinyl corners until they crack and gap. Water gets past the corner, fogging starts inside the sealed glass. We replace the sash or re-glaze the unit before the frame rots.
- Dragging PGT aluminum sliders from the 1960s and 70s. Original builder-grade aluminum sliders lose roller and track alignment after years of UV pitting and dust from the citrus belt. The door drags, won’t seal against the jamb, and you feel every Santa Ana gust through the gap. We realign tracks, swap rollers, and restore the seal.
- Santa Ana wind damage to glazing beads and screens. Highgrove’s east edge, where the 92313 ZIP pushes toward the wildland-urban interface, gets hit with wind-driven dust and debris. Glazing beads pop loose, screens tear, weatherstripping disappears. We replace and resecure, and we’ll spec impact-rated glazing when the exposure calls for it.
- Unflashed rough openings from past remodels. This is common on older Highgrove homes. A previous owner or a handyman swapped in a PGT unit but never flashed the rough opening. The unit’s fine; the sill rots anyway. We find water intrusion at the sill, pull the unit, and reframe and flash it correctly.
- Sealed glass failure on PGT units under full western sun. The sun load on a west-facing Highgrove wall is relentless. Sealed units fail, argon leaks, condensation appears between panes. We replace the glass pack when the frame’s solid, or recommend full-frame replacement when it isn’t.
PGT Service in Highgrove: What Local Conditions Mean for Your Equipment
Here’s something that will matter to any Highgrove homeowner planning a PGT window or door project: many lots in the 92313 ZIP still carry old citrus irrigation lines and shallow wells just below grade. We hand-dig and probe before setting any new rough opening, because a backhoe hit on a rusted irrigation line turns a one-day swap into a weekend of trenching. Flat tract cities like Riverside or PGT repair in Loma Linda don’t force that step on a window job. Highgrove does. It’s part of working on legacy agricultural parcels that got subdivided into residential lots without anyone mapping the old infrastructure.
That same history shows up in the housing stock. Ranch homes from the 1950s and 1960s have original framing, original wiring, and sometimes unpermitted additions from the farmworker housing era. When we pull a window, we don’t know what we’ll find until the trim’s off. On a recent job off one of the larger citrus-transition lots in Highgrove, similar to PGT service in Rubidoux, our crew pulled failing WinGuard vinyl sliders whose sashes had cracked at the corners after decades of sun. Behind the drywall: unpermitted framing and a shallow irrigation line running right through the new opening’s path. We reframed and flashed the rough opening, rerouted around the old line, and set new PGT impact units with OEM hardware. The room finally sealed against summer heat and Santa Ana gusts. That’s the difference between a crew that knows Highgrove and one that treats it like a flat tract.
PGT Models & Products We Service in Highgrove
We work on the full range of PGT residential product lines. That includes PGT WinGuard vinyl impact windows and sliding glass doors, PGT WinGuard Aluminum impact units, PGT Aluminum Series single-hung and sliding windows, and the architectural vinyl single-hung and casement replacement lines. On the service side, we source OEM PGT sashes, rollers, weatherstripping, and glazing when the unit is young enough to warrant it. When OEM is discontinued or priced beyond sense, we match quality aftermarket hardware that fits the profile without hobbling the unit. For installation and replacement work, we carry the PGT lines that make sense for Highgrove’s climate: impact-rated glass for wind and debris, vinyl frames that don’t pit like old aluminum, and low-E coatings that cut the summer sun load that kills sealed glass. More detail on our PGT capabilities is on our main PGT sales & service page.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Highgrove
PGT work in Highgrove falls into a few clear cost bands, and the numbers below reflect what we’ve seen across 92313’s older housing stock.
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
What drives the cost in Highgrove specifically: reframing rotted rough openings, flashing corrections from old remodels, probing and rerouting around old irrigation lines, and the walk-up labor on big lots with awkward access. A free estimate from us means we actually look at the opening, check what’s behind the trim, and write a line-item price. No change orders because we guessed wrong about what was inside the wall. Call (844) 384-3361 for an exact quote on your PGT work.
Serving Highgrove, CA — Our Local Coverage Area
We’re based in the Highgrove area and know this community well, just as we know PGT in Grand Terrace. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Highgrove
Usually yes, when the existing rough opening is square, dry, and flashed correctly. We won’t set a new PGT unit into a rotted or out-of-square opening, because the window fails regardless of what it’s made of. In Highgrove’s older stock, we find enough unflashed or rotted openings that a reframe is sometimes unavoidable. We’ll show you what we found before we touch anything. Call (844) 384-3361 and we’ll tell you what your opening needs.
Yes, when the frame is sound and the sealed glass in the sash is the only failure. We source OEM PGT sashes when the unit is young enough to justify it, and match a quality aftermarket sash when OEM is discontinued. If the frame itself has shifted or rotted, a sash swap is throwing money at a doomed unit. Call (844) 384-3361 for a straight read.
Yes. Riverside County’s wildland-urban interface clearance requirements kick in at the eastern edge of the 92313 ZIP, and that affects window specs on any new or replaced openings in those zones. Impact-rated glass and certain glazing materials are part of the compliance picture. We know which PGT impact lines meet the requirements and we’ll spec accordingly. Call (844) 384-3361 to confirm whether your lot falls in the WUI boundary.
Highgrove’s dust, UV, and dry heat do a number on aluminum tracks and rollers. Dust accumulates in the track, rollers pit and flatten, and the door starts dragging and then binds. The fix is roller replacement and track realignment, which we do regularly. Ignoring it makes the frame wear unevenly until the door won’t seal. Call (844) 384-3361 and we’ll get it rolling again.
We do, and we assume old infrastructure on every Highgrove lot until we’ve proven otherwise. We hand-dig and probe before any excavation for a new rough opening or door threshold. It’s slower, but it beats hitting a shallow well or irrigation line. Call (844) 384-3361 and we’ll check your lot before we cut anything.
Service Areas Near Highgrove
We run PGT service and installation from Highgrove into the surrounding communities. That includes Woodcrest to the south, Loma Linda to the east, and down through Orange County when the project warrants it. For specific coverage, see our pages for PGT service in Muscoy and PGT service in La Habra.
Book Your PGT Service in Highgrove Today
If your PGT windows or sliders are failing, or you’re planning impact-rated replacements for a Highgrove home, we’ll come out, look at the openings, and write you a real number. Call (844) 384-3361 to schedule your free estimate.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Highgrove and the Inland Empire. Build it right the first time. The second time costs twice as much and nobody’s happy about it.