CGI Construction in Aptos, CA

CGI Construction in Aptos, CA | Workshop Contractors

CGI cabinet installation and refacing in Aptos typically runs $4,000 to $13,000 for cabinetry, with full kitchen remodels ranging $14,000 to $45,000. What makes our CGI work different here is simple: we know what unincorporated Santa Cruz County permitting does to a cabinet job, and we know what coastal fog does to a cabinet box. We’re an independent construction firm serving Aptos and the surrounding coast, and we’ve been installing and servicing CGI sales & service products here long enough to see every failure mode this climate can throw at them. Call (844) 384-3361 for a free estimate and we’ll walk you through what your specific project actually requires.

Call (844) 384-3361

Why Aptos Residents Choose Us for CGI Service

We install and service CGI cabinetry across Aptos service area as an independent contractor. We’re not a CGI dealer, not an authorized rep, and we don’t carry a manufacturer badge. What we do carry is hands-on experience with CGI’s box construction, hardware, and finishes in marine-fog and salt-air conditions that punish cabinetry faster than almost anywhere else in California. Noel Figueroa, our owner and general contractor, learned framing and finish work from the tradesmen who built the houses on his street growing up in Ontario, and he’s spent the decades since doing the kind of work that holds up under a second look. Build it right the first time. The second time costs twice as much and nobody’s happy about it. That’s the standard we bring to every CGI cabinet job in Aptos, whether it’s a full kitchen remodel, cabinet refacing, or a single vanity replacement in a beach cottage near Rio Del Mar.

We source CGI-compatible hinges, slides, and shelf pins from quality aftermarket suppliers when OEM parts are slow or discontinued, but we always match load ratings and finishes for coastal exposure. That’s the difference between a cabinet door that swings clean for a decade and one that starts pitting within two seasons.

Common CGI Construction Problems We Solve in Aptos

• Salt-air corrosion on hinges and slides. Near Rio Del Mar and Seacliff, even stainless-labeled CGI hardware pits within a few seasons unless it was specified for marine exposure. We replace corroded hardware with coastal-rated aftermarket components matched to the original load rating.
• Swollen MDF boxes from fog and rain. Marine fog and winter rain cause MDF-core CGI cabinet boxes to swell at the toe kick and bottom shelf in beach cottages, especially where older decks or siding leaks go unresolved. We open the wall, fix the moisture source, and only then rebuild or replace the affected boxes.
• Thermofoil delamination in humid bathrooms. CGI thermofoil doors peel at the edges when installed in poorly ventilated bathrooms or near shower steam. Older Aptos cabins with undersized exhaust fans see this constantly. We reface with materials suited to the humidity or replace the doors entirely.
• Sagging particleboard shelving in hillside homes. Indoor RH above 60% for months at a time causes CGI particleboard shelving to droop on wide pantry and upper cabinets in humidity-swinging hillside homes. We replace shelves with sealed plywood and reinforce the pin supports.
• Unpermitted prior work behind the cabinets. This one is uniquely Aptos. Because the county permitting process requires legalizing unpermitted additions before signing off on even a simple cabinet swap, we regularly find undocumented framing, electrical, or plumbing once the old boxes come out. We handle the correction with the county and keep your timeline as tight as the process allows.

CGI Service in Aptos: What Local Conditions Mean for Your Equipment

Aptos is unincorporated Santa Cruz County, not a city, and that changes how a CGI cabinet or vanity replacement actually goes. Pull a permit for a cabinet swap here and you may discover the county requires legalizing an unpermitted prior addition or structural work before they’ll sign off. Contractors working in incorporated Capitola or the City of Santa Cruz don’t routinely confront that on a simple cabinet job. In Aptos Hills-Larkin Valley neighborhoods especially, many lots hold older structures that were never documented, so the cabinet permit often becomes the lever that forces a structural correction. We’ve walked homeowners through this enough times to know the sequence: open the wall, assess what’s really there, work with the county to legalize what’s sound, and remove what isn’t. Then we install the CGI cabinetry on a substrate that’s actually going to survive the next decade of fog.

We were called to a mid-century ranch near Rio Del Mar where the CGI thermofoil kitchen doors had peeled and the particleboard boxes were swelling at the toe kick from years of fog-driven moisture. After opening the wall, we found an unpermitted prior addition behind the cabinets. We worked with the county to legalize the framing before installing new CGI Shaker cabinets on a sealed plywood substrate with coastal-rated hinges and slides. That kitchen has now survived two winters without a hint of swelling.

CGI Models & Products We Service in Aptos

We install, repair, and reface the CGI lines most common in Aptos homes: RTA Shaker, Euro-style flat-panel, raised-panel maple, and thermofoil. Our approach to parts is practical. OEM CGI components can be slow or discontinued, so we stock compatible aftermarket hinges, slides, and shelf pins locally for faster turnaround across the coast. We always match load ratings and coastal finishes, never guessing at hardware specs. If a CGI box has swollen or delaminated beyond a single shelf or door, we’ll tell you straight: replacement beats patching. Repair only makes sense when the core is sound and the issue is hardware or one face.

CGI Service Pricing in Aptos

FAQs – CGI Construction in Aptos

Will replacing my CGI kitchen cabinets in Aptos require a county permit that could uncover unpermitted work? Yes. Because Aptos is unincorporated Santa Cruz County, cabinet and vanity replacement permits route through County of Santa Cruz, and they frequently require legalizing unpermitted prior additions or structural work before sign-off. If your home has an older addition or a bathroom that was never documented, plan for that conversation early. Call (844) 384-3361 and we’ll help you understand what your specific permit path looks like.

How do CGI cabinets hold up to the salt air and fog in La Selva Beach, Rio Del Mar and Seacliff? Without coastal-rated hardware and proper sealing, they degrade faster than you’d expect. Hinges pit, slides corrode, and MDF boxes swell at the toe kick. We always specify coastal-rated hinges and slides and install on sealed plywood substrate for homes near the water. For an exact assessment of your cabinet condition, call (844) 384-3361.

Can you reface CGI cabinets instead of replacing them in an Aptos hillside home? Yes, when the boxes are sound. If the core MDF or particleboard hasn’t swollen or delaminated, refacing the doors and drawer fronts is often the smarter move in hillside homes where the cabinet layout already works. If the boxes are compromised, we’ll tell you replacement is the better value. Estimates are free, so call (844) 384-3361 to find out which path applies to your kitchen.

What CGI bathroom vanity options work best for small Aptos beach cottages? Compact flat-panel or Shaker vanities with sealed edges and coastal-rated hardware fit the tight dimensions of older beach cottages and hold up better to shower steam. We steer most Aptos clients toward plywood-backed or sealed-edge boxes rather than raw MDF. Call (844) 384-3361 and we’ll talk through vanity sizing for your specific bathroom layout.

Does the wildfire WUI zone in Aptos affect CGI kitchen or bath remodels? It can, depending on your parcel. Homes in the wildland-urban interface zones around the Aptos hills may face defensible-space, venting, or roof assembly requirements that attach to a larger remodel permit even if the CGI cabinetry itself isn’t directly regulated. We coordinate with the county on the full scope. For a free estimate that accounts for your parcel’s specific requirements, call (844) 384-3361.

Service Areas Near Aptos

Beyond Aptos, our crews serve homes along the coast and into the hills. If you’re just over the line, we also cover CGI service in Seacliff and CGI service in Day Valley, along with Woodcrest, North Tustin, and Orange. Same team, same single-source accountability for the full project.

Book Your CGI Service in Aptos Today

One contractor. Every trade. If your CGI cabinets are failing or you’re planning a remodel in Aptos, call (844) 384-3361 to schedule your free estimate. We’ll inspect what’s in place, tell you what it needs, and put a line-item quote in your hand.

Written by Noel Figueroa, Owner & Aptos General Contractor at Workshop Contractors, serving Aptos and Santa Cruz County since day one.