Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in La Verne, CA | Workshop Contractors
Workshop Contractors provides independent CGI paver and retaining wall installation across La Verne, CA, handling driveways, patios, and engineered walls on both flat-core ranch lots and foothill-edge hillsides. The thing that separates our CGI work in La Verne from anyone else’s is that we plan every paver job around the city’s two very different soil realities: expansive clay on the flats, slope seepage in the hills. Call (844) 384-3361 to schedule a free estimate, and we’ll walk your property with you before anyone touches a base plate.
Why La Verne Residents Choose Us for CGI Service
Noel Figueroa, our owner and general contractor, grew up in the Vineyard neighborhood of Ontario and spent his early years working across the Inland Empire, which means he has seen how foothill drainage behaves differently from flatland drainage when a wall or a paver base fails. That matters in La Verne because the city is split: ranch tract homes from the 1950s-70s sit on flat clay in the core, while newer custom builds climb toward the San Gabriels along the Puddingstone edge. We have installed and repaired enough CGI in Upland and CGI pavers in 91750 to know that a patio base that works on D Street will not necessarily hold on a sloped lot off Bonelli Bluffs Drive.
We are an independent CGI service provider. Not manufacturer-affiliated, not authorized, and we will tell you that plainly because it changes how we approach the work: we are not here to push one product line. We are here to install CGI materials correctly, using CGI sales & service knowledge built from years of working with their Plaza Series, StoneWall II, and Eco-Optiloc units. If CGI is the right material for your driveway, we will say so. If a different base or wall system fits better, we will say that too. One contractor, every trade, and one honest opinion on materials.
Styles & brands we work with
Common CGI Construction Problems We Solve in La Verne
These are the failures we see week after week across La Verne, and every one of them has a specific local cause:
- Paver settling and heaving on expansive clay. The flat-core ranch neighborhoods sit on clay that swells when wet and shrinks when dry. When a paver driveway was installed without adequate base compaction or a geotextile separator, the clay pumps up through the base and the pavers shift. In spring, after winter rain soaks the clay, we see driveways that look like a shallow washboard. Fixing it requires lifting the pavers, rebuilding the base to at least 6-8 inches of compacted aggregate, and reinstalling. Patching a few low spots without fixing the base just means you will call us again next spring.
- Retaining wall bulging after winter rains. On foothill-edge lots in 91750, hillside runoff pushes against walls that were never designed with geogrid reinforcement or proper drainage behind the block. CGI StoneWall II blocks are solid units, but even the best block cannot hold back a saturated slope when there is no drain pipe and no engineered backfill. The wall starts to bulge, then topples. We resolve these by rebuilding the wall with the right reinforcement and drainage, not by stacking the old blocks back up and hoping.
- Surface spalling and color loss on west-facing driveways. La Verne’s inland summers combined with Santa Ana wind events bake pavers exposed to afternoon sun. West-facing CGI driveways take the worst of it: the UV degrades the paver surface, and years of hot-dry-wet cycles cause the top layer to spall or flake. Older CGI pavers, especially from early production runs, show this more than newer units. Replacement with a fresh paver line rated for UV exposure is often the only real fix.
- Joint sand erosion and weed growth in permeable systems. CGI Eco-Optiloc permeable pavers depend on the joints staying open for water infiltration. After heavy winter rains wash through foothill runoff areas, the joint aggregate erodes, and weeds move into the open joints. If the joints are not re-sanded with the correct permeable aggregate after each rainy season, the system stops infiltrating water and the pavers begin to shift. We re-sand and re-compact as part of routine seasonal maintenance for La Verne homeowners.
- Ponding water on flat-roof ranch driveways. Many mid-century ranch homes in La Verne’s flat core have driveways that slope toward a low corner where water sits after rain. When pavers were installed without correcting the original grade or adding a proper drainage swale, that corner ponds, the base saturates, and the pavers sink. We regrade the driveway surface when we rebuild, so water moves off the pavers instead of through them. This is a pattern any La Verne contractor recognizes immediately, and it is fixable when the base is rebuilt with positive drainage.
CGI Service in La Verne: What Local Conditions Mean for Your Equipment
La Verne’s hillside and infill lots, especially along the Puddingstone and Bonelli-area edges, require engineered retaining walls and slope drainage that flatland neighboring cities like Pomona or Claremont do not face in the same way. A paver driveway or patio on a sloped La Verne lot must account for hillside seepage before base prep even begins: groundwater moves downhill through the slope and will saturate the back of a retaining wall or the underside of a paver base if there is no drainage path. That means a paver job on a Bonelli-area hillside is not the same as a paver job in the flat ranch core near the University of La Verne. The base needs to be thicker, the geogrid needs to be engineered for the slope’s angle, and the drainage behind any wall needs to carry water away, not trap it. If the drainage is wrong, the wall fails and the pavers below it wash out. We have seen it happen, and the repair is always more expensive than doing the drainage right the first time. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
CGI Models & Products We Service in La Verne
We install and repair the full CGI hardscape line, including the Plaza Series pavers, CGI-distributed Tremron Oldcastle units, StoneWall II retaining wall blocks, and Eco-Optiloc permeable pavers. When matching an existing installation, we use CGI’s own paver and wall block units so the interlock profiles mate correctly; off-brand blocks will not seat into CGI’s locking system, and the result looks like a patch job. For base materials and joint sand, we use quality aftermarket products because those are not proprietary and the right polymeric or permeable sand beats whatever was sitting on a shelf. We keep the common CGI Plaza Series colors and StoneWall II block sizes available locally for fast turnaround on La Verne repairs, which means a small paver match does not have to wait on a specialty order from a distant distributor.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in La Verne
What you pay depends on the scope: a small patio repair costs far less than a full hillside driveway rebuild with engineered retaining walls. Here is what our La Verne clients typically see:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Sloped lots and engineered walls add to the driveway cost because the base, drainage, and reinforcement are more involved. Our free estimate includes a walkthrough of your property, a written line-item quote, and an honest assessment of whether repair or replacement makes sense for your budget. Call (844) 384-3361 to get a number you can actually plan around.
Serving La Verne, CA — Our Local Coverage Area
We’re based in the La Verne area and know this community well, including CGI service in Montclair nearby. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in La Verne
Yes. We use CGI’s own paver units from the same product line when matching an existing installation, so the color, texture, and interlock profile line up across the transition. For older CGI lines, we will pull a sample from your existing driveway and order the closest available match. Call (844) 384-3361 to schedule a free estimate, and we will bring the samples to you.
Yes, absolutely. Sloped lots along the Puddingstone and Bonelli-area edges need engineered base prep: deeper aggregate, geogrid reinforcement where the grade exceeds a few degrees, and subsurface drainage behind any retaining wall. Flatland lots in the ranch core also need attention to expansive clay, but the work is different. Getting the base right on a hillside is the difference between a paver patio that holds for 20 years and one that washes out in two winters.
Most paver driveway installations in La Verne take between 3 and 7 working days depending on the site: flat lots with straightforward drainage run faster than hillside lots where we are rebuilding retaining walls and adding slope drainage. We give you a written schedule after our free estimate, and we hold to it because we are the single contractor managing the whole installation. Call (844) 384-3361 for an exact timeline on your property.
Sometimes, but rarely on a sloped La Verne hillside. If the blocks themselves are intact and only the drainage or backfill failed, we can dig behind the wall, install a french drain, and reset the blocks with engineered backfill. If the footing has shifted or the wall is actively rotating, repair is a patch, and replacement is the only fix that stops the cycle. We will tell you straight which one you have.
Re-sand the joints after each winter rainy season, keep the surface free of standing water at low corners, and reseal pavers on west-facing driveways every few years to slow UV spalling. For permeable Eco-Optiloc systems, use only permeable aggregate in the joints. The hot-dry-wet cycle in La Verne is hard on pavers, and annual maintenance is far cheaper than a full rebuild. Call (844) 384-3361 if you want a maintenance walkthrough or a quote for repairs.
Service Areas Near La Verne
We serve all of La Verne and the surrounding communities, including La Verne service area coverage throughout 91750. If you are nearby, you will sometimes find our crews working on CGI service in Eastvale or CGI service in Jurupa Valley. We also take jobs in Woodcrest, North Tustin, and Loma Linda when the project fits our schedule.
Book Your CGI Service in La Verne Today
One call gets you a free estimate, a written quote, and a walkthrough from a contractor who has actually built on La Verne’s foothills and flats. Call (844) 384-3361 to schedule yours. Noel Figueroa and the Workshop Contractors team will take it from there.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving La Verne and the surrounding Inland Empire.