Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Running Springs, CA | Workshop Contractors
Workshop Contractors provides independent CWS cabinetry and construction service across Running Springs, CA, and offers CWS service in Crestline as well. We are not authorized, sponsored, or endorsed by CWS. What makes our CWS work different here is simple: we inspect the foundation and floor structure before we ever set a base cabinet. In a mountain town where many homes sit on sagging pier-and-post foundations, that step matters more than the cabinet itself. Call (844) 384-3361 for a free estimate.
Why Running Springs Residents Choose Us for CWS Service
Most of the CWS cabinetry we install and correct in Running Springs was put in by contractors who treated a mountain cabin like a flatland tract home. Cabinets went over floors that were never level. Drawers were hung on walls that shift with the seasons. Within a few winters, the doors rack and the glides bind. We approach CWS work differently because we learned the hard way on mountain jobsites. Noel Figueroa, our owner and general contractor, started framing houses before he could legally rent a truck, and he has spent years working on steep lots in the Inland Empire and San Bernardino Mountains. When you call us, you get a contractor who has actually corrected the kind of problems Running Springs houses throw at you. We spec CWS OEM hinges, glides, and touch-up finishes when the box is structurally sound. When the box has swollen or lost its joinery, we tell you honestly that replacement beats repair. That candor is why CWS sales & service calls keep coming from Running Springs homeowners who already tried the other route.
Styles & brands we work with
Common CWS Construction Problems We Solve in Running Springs
- Cabinet boxes swelling and delaminating. Running Springs sits near 6,000 feet, where winter snow melt and freeze-thaw cycling push moisture into walls and floors. Particleboard and MDF CWS boxes that got wet once start swelling at the seams, and the melamine layer peels away. We see this most often in kitchens built against exterior walls that were never properly insulated or flashed.
- Drawer glides and hinges seizing. The dry mountain air in summer opens gaps; winter moisture closes them. Older CWS drawer glides and hinges, especially the cheap builder-grade hardware from 1980s-era cabins, bind and fail after a few seasons of that cycle. We replace with OEM CWS under-mount soft-close glides and quality aftermarket hardware only when OEM is unavailable.
- Out-of-square cabinet runs on sloped lots. When piers and rim joists settle, the floor moves. Cabinets installed level at first now rack, and the doors stop closing flush. We check the foundation before we shim, because shimming a cabinet over a moving floor is a temporary fix.
- Framed boxes separating at the face frame. In cabins that flex with snow load, the face frame pulls away from the box sides, leaving visible gaps at the stiles. That’s a joinery failure, not a hinge problem, and it usually means the corner blocks have split.
- Second-home deferred maintenance catching up. A lot of Running Springs homes sit empty for months. When an owner arrives for the season, they find drawers stuck shut, hinges frozen, and laminate peeling. We fix what’s worth fixing and replace what isn’t.
CWS Service in Running Springs: What Local Conditions Mean for Your Equipment
Here’s what flatland cabinet installers miss about Running Springs. Many of the A-frames and chalets built in the 1950s through 1980s went up as second homes on pier-and-post foundations that were never engineered for current snow loads. The piers were sized for a weekend cabin, not forty years of freeze-thaw and heavy wet snow. On Running Springs cabinet jobs, we inspect the foundation posts and rim-joist connections before we set a single base cabinet, because a contractor who skips that step installs cabinets over a floor that keeps moving. We have seen it on jobs off the Rim of the World corridor: a kitchen floor sagging two inches because two pier posts under the rear wall had rotted through. Noel Figueroa’s crew sistered and re-blocked the rim joist, shimmed and leveled the subfloor, then set a new CWS semi-custom run with soft-close plywood drawer boxes. The doors closed flush because the floor finally stopped moving. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
CWS Models & Products We Service in Running Springs
We work on the full range of CWS cabinetry commonly installed in Running Springs homes: semi-custom wood cabinetry with KraftMaid-series door styles and finishes, all-plywood drawer boxes with soft-close under-mount glides, and both framed and frameless cabinet boxes for kitchens and baths. Our approach on parts is straightforward. When a CWS box is structurally sound, we spec OEM hinges, glides, and touch-up finishes. When OEM isn’t available for an older line, we steer owners to quality aftermarket soft-close hardware that matches the original profile. We don’t stock every CWS part on a shelf, but we know exactly what to order and how to get it up the mountain without delay. If you’re not sure what model line you have, send us a photo and we’ll tell you what’s worth keeping.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Running Springs
CWS cabinet work in Running Springs carries the same material costs as anywhere in the region, but the labor is different. Mountain access, sloped lots, and foundation corrections all add hours that a flatland quote never covers. Here are the ranges we work within for the services most Running Springs homeowners ask about.
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
What drives the final number: whether the floor needs structural correction, how far the cabinetry has to be carried from the road, and whether we’re refacing existing boxes or replacing them entirely. Every estimate we give in Running Springs is free, and it includes a foundation and floor inspection before we talk cabinet styles. Call (844) 384-3361 to schedule yours.
Serving Running Springs, CA — Our Local Coverage Area
We’re based in the Running Springs area and know this community well, and we also handle CWS repair in Lake Arrowhead. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Running Springs
Yes, almost always. If the floor moves, the cabinets move, and no hinge adjustment fixes that. We inspect the piers and rim joists first, then do whatever structural correction is needed before any cabinet goes in. Call (844) 384-3361 to have us look at your floor.
They hold up when they’re installed over a stable, dry floor and kept sealed from wall moisture. The failure we see in Running Springs is rarely the CWS cabinet itself; it’s the wall behind it leaking or the floor under it shifting. We correct those conditions so the cabinets don’t fight the house.
Yes, if the boxes are sound. We reface with CWS door styles and finishes where the structure is intact and the boxes are square. If the boxes have swollen or the joinery has split from years of moisture, refacing is money wasted. We’ll tell you which you have, and call (844) 384-3361 if you want that assessment done.
We coordinate deliveries through suppliers who regularly run Highway 18 and the Rim of the World corridor, and we stage materials before the truck arrives so the road doesn’t dictate the schedule, whether the job is in Running Springs or we are handling CWS repair in Highland. For steep driveways, we bring our own equipment to move cabinetry from the road to the house without asking you to figure it out.
Often, yes. Running Springs is in a wildland-urban interface zone, and a lot of older cabins were built before modern snow-load and WUI codes. When a kitchen remodel opens up walls, that’s the moment to correct deficiencies the inspector will flag anyway. We pull permits and bring the assemblies up to current code before the cabinets go in. Call (844) 384-3361 for a free estimate that includes a code review.
Service Areas Near Running Springs
We serve homes throughout the San Bernardino Mountains and the Inland Empire, including Running Springs service area and nearby communities. Our crews also work in Woodcrest, Anaheim, North Tustin, Orange, Loma Linda, and Buena Park. For CWS cabinetry work in those areas, see CWS service in Costa Mesa and CWS service in San Joaquin Hills.
Book Your CWS Service in Running Springs Today
If you’re planning a kitchen remodel, cabinet reface, or countertop replacement in Running Springs, start with a foundation and floor inspection. That’s what protects the cabinets you’re about to buy. Call (844) 384-3361 to schedule your free estimate, and we’ll walk the whole scope with you before you spend a dollar on materials.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Running Springs, CWS in Mentone, and the San Bernardino Mountains.