Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Seven Trees, CA | Workshop Contractors
We’re an independent CWS service contractor working across Seven Trees, and the answer most homeowners here need is straightforward: we repair, reface, and install CWS cabinetry in the neighborhood’s 1940s – 1960s ranch homes, and we do it under Santa Clara County permits, not City of San Jose permits. That distinction trips up a lot of remodels in Seven Trees, and it’s one we handle every week. If your CWS cabinet doors are peeling, boxes are swollen, or you’re planning a kitchen gut-out, call us at (844) 384-3361 for a free estimate. Noel Figueroa, our owner and general contractor, has spent years crawling under sinks and pulling face frames in these exact houses, so we know what holds up and what doesn’t.
Why Seven Trees Residents Choose Us for CWS Service
Most contractors in the South Bay treat CWS cabinetry as generic boxes. We don’t. We know the CWS Canterbury raised-panel oak lines that went into so many Seven Trees kitchens in the 1960s and 70s, and we know the Hartford maple shaker cabinets that showed up in later remodels. When a door delaminates or a drawer glide rips out of thin box stock, we can tell you whether it’s worth saving or whether the cabinet run has reached the end of its life. Noel Figueroa learned framing and finish work starting in the Inland Empire, where he spent years on ground-up residential builds before moving into the kind of tight, existing-home work that defines Seven Trees. Around here, we’re known for one thing: builds that hold up under a second look. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
We’re an independent contractor. We are not authorized, sponsored, or warrantied by CWS. What we do offer is direct accountability: our crew sources the parts, installs them, and stands behind the labor. When we say “we source and we install,” we mean the same person who orders your replacement doors is on site hanging them. That’s the difference with Workshop Contractors. One contractor. Every trade.
Styles & brands we work with
Common CWS Construction Problems We Solve in Seven Trees
- Thermofoil and laminate delamination along door bottoms. Seven Trees afternoons get hot, and many of these 1950s kitchens have single-pane windows that bake the cabinet runs facing them. The thermofoil on CWS white thermofoil cabinet lines peels at the bottom edge first, and once moisture gets under the laminate, the door warps. We can often save the boxes and replace the doors.
- Particleboard boxes swollen from slow plumbing leaks. In older ranch homes off Monterey Highway and Seven Trees Boulevard, the original sink plumbing has been in place for 50 or 60 years. A slow leak under the sink doesn’t announce itself until the cabinet floor is crumbling. The cabinet fails before the countertop does. We replace the box with plywood construction and re-hang the existing doors when they’re still sound.
- Sagging or separated face frames on original-install CWS oak cabinets. Seven Trees has a lot of unpermitted additions. When a wall shifts because a prior owner added a room without county approval, the cabinets hung on that wall shift with it. Face frames separate, doors stop closing square, and drawer boxes bind. We reset the run, re-anchor the boxes, and re-align the doors.
- Drawer glide screws pulling out of thin box stock. Original CWS cabinets from the 1960s and 70s used thinner particleboard than today’s standards. After decades of daily use, the screws that hold the glides strip out and the drawer sags. We re-anchor with solid-wood blocking and upgrade to Blum-style soft-close glides where the layout allows.
- Discontinued line matching for additions and partial remodels. If you’re adding a run of cabinets to a Seven Trees kitchen that still has CWS Canterbury or Hartford boxes, finding doors that match is the hard part. We match OEM CWS doors when the line is still in production and build solid-wood or plywood aftermarket doors when it isn’t.
CWS Service in Seven Trees: What Local Conditions Mean for Your Equipment
Seven Trees sits in unincorporated Santa Clara County, not the city of San Jose. For CWS service in San Jose proper, the permit process differs entirely. That means a CWS kitchen gut-out here pulls county building permits and passes county inspections, not San Jose ones. If you’ve lived here long, you know the difference: county inspectors often flag unpermitted additions and altered walls that city inspectors in neighboring San Jose may never see on a routine kitchen permit. For our cabinet crews, that reality shapes the work. Before we pull a single cabinet off a wall, we check whether that wall is original to the 1950s ranch or part of an addition someone built without drawings. If the wall has drifted or the framing isn’t square, new cabinets won’t sit right no matter how carefully we hang them. So we coordinate with the county from the start, identify what’s permitted and what isn’t, and build the cabinet plan around the structure as it actually exists. That’s not theoretical. We see it on almost every full kitchen remodel in Seven Trees, especially in the tight galley layouts off Seven Trees Boulevard where every inch of cabinet run matters.
CWS Models & Products We Service in Seven Trees
We work on the full spread of CWS product lines common in this neighborhood: Canterbury raised-panel oak cabinets, Hartford maple shaker cabinets, ready-to-assemble white thermofoil cabinet lines, and CWS bathroom vanity cabinet collections. When parts are still available, we order OEM CWS doors, drawer fronts, and hinges direct. When a line has been out of production for years, we fabricate replacement doors in solid wood or plywood and finish them to match the existing run. For Seven Trees turnaround, we keep common hinge styles, drawer glides, and touch-up finishes on our trucks, so a door re-hang doesn’t wait on a two-week parts order. CWS sales & service work here is about matching what’s in the house, not selling a whole new kitchen when the existing boxes are still sound.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Seven Trees
Here’s what CWS cabinet work typically runs in Seven Trees. These are market-calibrated ranges we’ve seen across the neighborhood’s ranch homes, not promises: every house has its own wall conditions, plumbing surprises, and permit history.
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
What drives the number is whether we’re refacing existing boxes, replacing boxes while keeping the layout, or tearing out to the studs and rebuilding around the county’s permit requirements. A free estimate from us is a written line-item quote that accounts for the walls we’ll actually be working on. Call (844) 384-3361 and we’ll walk the kitchen with you.
Serving Seven Trees, CA — Our Local Coverage Area
We’re based in the Seven Trees area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Seven Trees
Yes. Seven Trees is unincorporated Santa Clara County, so any cabinet work that involves moving plumbing, electrical, or wall framing pulls a county permit and county inspections. A straight cabinet-for-cabinet swap in the same footprint may not require one, but most of what we do here goes beyond that. We handle the permit paperwork as part of the job. Call (844) 384-3361 and we’ll tell you exactly what your project triggers before any work starts.
Sometimes. If the thermofoil is lifting along the bottom edge but the door core is still flat and dry, we can often re-laminate the door or replace it with a matching OEM or aftermarket door while keeping the box. If the delamination has allowed moisture into the core, the door is done and we order a replacement. Either way, we quote it honestly. Call (844) 384-3361 for an exact assessment.
Yes, in most cases. If the CWS line is still in production, we order OEM doors and drawer fronts to match. If it’s been discontinued, we fabricate solid-wood or plywood doors, match the profile and finish to the existing run, and install them so the addition reads as original. Matching a 1960s oak finish takes a careful eye, but it’s work we do regularly in Seven Trees. Call (844) 384-3361 to talk through the specifics.
A cabinet reface in Seven Trees usually lands in the $4,000 to $13,000 range depending on door counts and finish work. A full kitchen remodel runs $14,000 to $45,000. The deciding factor is usually the box condition and the layout. If your CWS boxes are sound and the layout works, refacing is the smarter spend. If the particleboard is swollen or the galley layout fights you every day, a full remodel makes more sense. Call (844) 384-3361 and we’ll price both paths so you can compare.
It might. If an addition was built without county permits, the wall it shares with your kitchen may not be square, and county inspectors may require corrections before signing off on new cabinet work. We’ve worked through this on many Seven Trees remodels. We identify the issue early, build the cabinet plan around the real wall conditions, and coordinate with the county so you’re not surprised mid-project. Call (844) 384-3361 for a straight answer about your specific house.
Service Areas Near Seven Trees
Workshop Contractors also provides CWS service in Lexington Hills and CWS service in Communications Hill. We cover the surrounding Seven Trees service area and regularly work in Woodcrest, Anaheim, and North Tustin as well. If you’re just outside Seven Trees proper, call us and we’ll confirm coverage for your address.
Book Your CWS Service in Seven Trees Today
On a 1959 ranch off Seven Trees Boulevard, we pulled a set of delaminated CWS thermofoil uppers above a sink that had leaked for years into the particleboard boxes. We replaced the water-damaged boxes with plywood carcasses, reused the solid doors after cleaning and re-hanging them on new soft-close hinges, and reset the run plumb to a wall that had drifted, all under a county permit. The homeowner kept their layout and got a kitchen that closes and opens cleanly for the first time in a decade. That’s the kind of job we do best. Call (844) 384-3361 to schedule your free estimate.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Seven Trees and the South Bay.