Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Upland, CA | Workshop Contractors
We provide independent CWS construction and cabinetry service across Upland, from CWS cabinet installation and refacing to full kitchen remodels built around their box lines. What sets our CWS work here apart is that we tie every repair or install to what Upland’s soil, slope, and dry-heat cycles actually do to a cabinet over time. If you’re dealing with sagging doors, swollen toe kicks, or a kitchen that needs a complete CWS cabinet run, call (844) 384-3361 for a free estimate.
We know CWS as a contractor who has installed and repaired their ready-to-assemble and assembled lines in real Upland kitchens, not as a showroom rep. See our CWS sales & service page for the full scope of what we handle.
Why Upland Residents Choose Us for CWS Service
We’ve been through enough CWS cabinet boxes in Upland homes to know where they fail, why they fail, and when a repair beats a replacement. That history matters because CWS sells through building-supply and online channels, which means the homeowner is often the one who assembled the RTA cabinet or hired a handyman who did. By the time we arrive, we’re usually looking at fastener pull-out, racked drawer boxes, or hinges tearing out of plywood that has dried and shrunk.
Noel Figueroa, our owner and general contractor, learned finish carpentry the old way: on job sites across the Inland Empire, where a cabinet that wasn’t square got pulled off the wall and done again. He grew up in the Vineyard neighborhood of Ontario and later trained through Chaffey College’s construction technology program, so he has spent decades working with the same 1950s-to-1980s housing stock that fills Upland’s neighborhoods. That background is why we check the wall and the floor before we hang a single CWS box. Our team handles the full Upland service area, including the foothill neighborhoods where moisture behaves differently than it does downtown.
Styles & brands we work with
Common CWS Construction Problems We Solve in Upland
- Sagging soft-close doors on CWS shaker and raised-panel cabinets. Upland’s Santa Ana winds drop interior humidity fast, then winter rains push it back up. The hinge plates on CWS doors mounted to thinner plywood or particleboard sides work loose in that swing. We re-seat or replace hinge hardware and, where the box side is too far gone, we add backing or switch to Blum-style aftermarket hinges matched to the slab material so the new screws actually hold.
- Racked RTA drawer boxes and loose adjustable shelves. CWS ready-to-assemble cabinets put together on-site often show joint loosening and fastener pull-out after a few of Upland’s hot, dry summers. Plywood shrinks, cam locks back off, and drawers start binding. We re-square, re-glue, and re-fasten where the panels are still sound, and we tell you straight when a new drawer box costs less than chasing a bad one.
- Swollen toe kicks and delaminating cabinet bases in foothill homes. In 91784, winter rain running off steep lots regrades swales and pushes water against exterior walls. That moisture wicks into the cabinet underside, swells the board, and eventually peels the finish. We see it most on the north-side streets that back up to the mountain frontage.
- Joint separation and finish checking on shaker door panels. Direct sun through east- and south-facing Upland windows, especially during summer heat, dries the panel centers faster than the frame edges. The result on CWS shaker doors is a visible hairline at the panel joint. Depending on the panel’s condition, we can re-glue and refinish, or replace the door front while keeping the box.
- Hardware that fails from a mismatch between box material and screw type. CWS cabinets built with thinner plywood sides do not hold a standard wood screw under repeated soft-close cycling. We match replacement hardware to the actual side material, not just the hinge brand. That one detail prevents the same door from sagging again in nine months.
CWS Service in Upland: What Local Conditions Mean for Your Equipment
Upland sits at the base of the San Gabriel Mountains, and the pre-1980 tract homes and custom ranches along the foothill streets, especially in 91784, were built on expansive clay soils. That clay expands when wet and shrinks when dry, so the ground under a slab moves seasonally in a way you would not see in cities built on sandier fill. A kitchen wall that shifts by a few millimeters is enough to throw a CWS cabinet run out of level, bind soft-close hinges, and pop a countertop seam. In Upland’s foothill pockets, we also deal with the fact that homes back up to mountain frontage where winter rain running off steep lots regrades swales and pushes water against exterior walls. Before we install any new CWS cabinetry in those kitchens, we check the wall and cabinet base for moisture intrusion. That check is not optional, because a drywall patch and a new cabinet run will both fail within two seasons if the water path is still there. This is the Upland-specific work that a generic cabinet installer does not do, and it is the main reason we keep coming back to 91784 for CWS kitchen jobs.
CWS Models & Products We Service in Upland
We service the CWS ready-to-assemble all-plywood cabinet lines, the assembled shaker and raised-panel series used in mid-range kitchen remodels, and the vanity and bath cabinet lines stocked by regional suppliers. We also replace CWS cabinet hardware, hinges, and drawer glides when they wear or fail. Our parts approach is simple: when the CWS line is still supported, we order OEM hinges, glides, and door panels; when the line is out of production, we move to quality aftermarket hardware, typically Blum-style soft-close, and match it to the box material so the new screws hold for good. On a 1960s ranch in the foothill streets of 91784, we pulled out water-swollen base cabinets where winter runoff had worked against the exterior wall beneath a kitchen window, then reframed and sealed the wall before setting new CWS shaker boxes on a raised, moisture-blocked base. For homeowners looking beyond Upland, we also provide San Antonio Heights CWS service with the same moisture-blocking approach. We replaced the failing soft-close hinges with OEM CWS hardware where it was still available and rehung the uppers with proper anchoring, and the homeowner got a dry, square cabinet run instead of another season of swelling doors. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Upland
Pricing for CWS cabinet work in Upland depends on scope, box condition, and whether we are installing new, refacing existing, or repairing specific failures. The table below gives you realistic ranges based on what we have quoted across Upland kitchens, from small galley remodels near downtown to larger custom foothill jobs in 91784.
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
Your free estimate includes a look at the existing CWS boxes, the wall and base conditions behind them, and a written scope so you know exactly what is repair versus replace. Call (844) 384-3361 to schedule yours.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Upland
Yes, if the boxes are square and the side boards are dry. We have refaced plenty of CWS shaker and raised-panel cabinet runs where the doors had checking or joint separation but the boxes were still solid. We re-hinge with matched hardware and install new door fronts, which costs significantly less than a full tear-out. If the box has swelled from moisture or racked out of square, refacing becomes a short-term fix, and we will tell you that before you spend the money. Call (844) 384-3361 for an honest assessment.
Usually, yes. Sagging CWS soft-close doors are typically a hinge-plate issue: the screws have backed out of thin plywood or particleboard, or the plate itself has deformed. We re-seat the plate, replace it where needed, and if the box side is too far gone to hold a screw, we add a backing block inside the cabinet or switch the screws to a type that holds in that specific material. The fix is quick and does not require replacing the door or the box.
Because homes in Upland’s foothill ZIP 91784 back up to mountain frontage where winter rain runs off steep lots and pushes water against exterior walls. Before we install new CWS cabinetry in those kitchens, we check the wall and cabinet base for moisture intrusion. Our CWS service in Claremont follows the same pre-installation protocol. A cabinet run installed over a wet wall or slab edge will swell at the toe kick and delaminate within a season or two, and no cabinet brand survives that. The check takes time, but it is cheaper than replacing a new kitchen.
A small kitchen remodel in Upland generally runs between $9,000 and $20,000 depending on whether you are keeping the existing layout, refacing versus replacing CWS boxes, and what countertop and backsplash you choose. That range covers cabinet install or reface, countertop, sink, and basic electrical and plumbing tie-ins, and it assumes the walls and slab are in decent shape. For an exact quote, call (844) 384-3361 and we will walk the space with you.
Yes. Mid-century Upland kitchens, especially the 1950s and 1960s tract homes near downtown, often have the floor space for an island but need electrical and flooring work first. We handle the full scope: floor and subfloor prep, electrical for outlets, cabinet assembly and anchoring, and countertop templating and install. We also check for the slab settlement common on Upland’s clay soils before we set the island, so it does not sit proud at one end in two years. Our Rancho Cucamonga CWS service addresses the same clay-soil challenges.
Service Areas Near Upland
We handle CWS cabinet work throughout Upland and the surrounding cities, including Chino, Montclair, Ontario, Rancho Cucamonga, and Claremont. For clients just over the county line, see our CWS service in Chino page or our CWS service in Montclair page for the same scope of repair and install work in those areas.
Book Your CWS Service in Upland Today
If your CWS cabinets are sagging, binding, swelling, or you are planning a kitchen that uses them, we will come out and look. Call (844) 384-3361 to schedule your free estimate, and we will get you a written scope and price.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Upland and the Inland Empire.