Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Santa Ana, CA | Workshop Contractors
We provide independent Mr-Glass bath and shower enclosure service across Santa Ana, from frameless sliding systems to semi-frameless pivots and custom-cut glass. What separates our Mr-Glass work here is simple: we understand that most Santa Ana homes pre-date modern framing tolerances, so we measure and install for out-of-square openings rather than fighting them. If you’re planning a shower upgrade in a 1920s bungalow or a 1950s tract house, call (844) 384-3361 for a free estimate. We’re owner-operated by Noel Figueroa, and we’ve been setting glass in older Orange County homes long enough to know the walls rarely cooperate.
Why Santa Ana Residents Choose Us for Mr-Glass Service
We’ve installed and serviced Mr-Glass bath and shower enclosures on hundreds of Santa Ana remodels, so we know how their hardware, seals, and panel tolerances behave in real houses. That experience matters here more than in newer cities. Noel Figueroa grew up around tradesmen who framed houses in the Inland Empire, learned construction technology at Chaffey College, and has spent decades working on buildings where nothing is perfectly plumb. He’s the kind of contractor who re-checks a rough opening twice before ordering glass, because he’s seen what happens when you trust a tape measure from 1940. We’re a licensed general contractor, insured and bonded, and we handle the full scope from framing to glass to waterproofing under one contract.
Noel’s line on the job site is one we still use: “Build it right the first time. The second time costs twice as much and nobody’s happy about it.” That’s how we approach every Mr-Glass enclosure we set in Santa Ana.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Santa Ana
- Dried-out sweep and jamb seals on sliding enclosures. Santa Ana’s semi-arid heat and dry Santa Ana winds pull moisture out of rubber seals faster than coastal humidity would. Within a few seasons, the sweep at the bottom of a Mr-Glass slider hardens, curls, and starts letting water onto the bathroom floor. We replace seals before the subfloor takes damage.
- Seized bottom guide rollers and top track bearings. Mineral scale from Santa Ana’s hard water combines with fine dust that blows in from the foothills, and the result is rollers that bind instead of glide. Panels start to jump the track or hang off-plumb. We clean, re-lubricate, or swap rollers with genuine Mr-Glass parts when they’re still available.
- Silicone and clear-coat failure at the wall-to-glass seam. In older Santa Ana bathrooms, walls are rarely square. When a square-cut Mr-Glass panel meets a wall that’s a half inch out of plumb, the silicone joint carries stress it wasn’t meant to. Over time, it pulls away, stains, and can cause stress cracks at the hinge points. We re-set panels with proper shimming and new silicone.
- Tempered panel edge chipping from settling door frames. Where a later rear addition has shifted the opening out of square, the glass edge can contact the frame and chip. Tempered glass is strong across its face but vulnerable on the edges. We inspect for this before installation and adjust framing where needed.
- Track corrosion from years of bathroom humidity and hard water. In older Santa Ana homes without proper bath fans, humidity sits in the aluminum track. Over years, it pits and corrodes. If the track is too far gone, replacement is the honest answer, not a parts patch.
Mr-Glass Service in Santa Ana: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic Mr-Glass page. In the older neighborhoods around downtown and the east side, it’s common to find a 1920s bungalow with a later 1950s rear addition built on a separate, shallow foundation. The seam between the two structures is where cracks and settling almost always show up first, and that settling translates directly into door and window openings that have gone out of square. In 92701, 92703, and 92707 specifically, we’ve measured the same pattern again and again. A shower or glass panel ordered to the original rough opening often won’t fit until we re-check plumb at that seam. That’s the threshold question for any Mr-Glass installation here, and it’s the first thing we verify before we order a single panel. It keeps Santa Ana homeowners from paying for glass that arrives dead on spec and still doesn’t fit the wall they actually have.
Mr-Glass Models & Products We Service in Santa Ana
Our crews work on the full Mr-Glass range: frameless sliding shower door systems, semi-frameless pivot shower enclosures, neo-angle corner shower units, and custom-cut tempered glass panels and mirrors. We keep common hardware on hand for faster Santa Ana turnaround, and we use genuine Mr-Glass tracks, rollers, hinges, and seals when they’re available, because the panel geometry is cut to match them. When a factory part is discontinued, we turn to quality aftermarket seals and rollers that meet the same tolerances. If a frame or track is corroded, or the opening has shifted out of square, we’ll tell you plainly that replacing the unit is cheaper long-term than chasing parts. You can read more about our broader Mr-Glass sales & service work, but this page focuses on what Santa Ana specifically throws at the product.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Santa Ana
What drives cost here isn’t just the glass. It’s the age of the house, the condition of the surrounding framing, and whether the opening needs re-setting before a panel can hang true. Here are our current market-calibrated ranges for Santa Ana:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
Every free estimate includes an on-site look at your rough opening, a check for out-of-square conditions at any addition seam, and a written line-item quote. No change orders down the road because we caught the framing issue before the glass was ordered. Call (844) 384-3361 to schedule yours.
Serving Santa Ana, CA — Our Local Coverage Area
We’re based in the Santa Ana area and know this community well, and we also provide Mr-Glass service in Tustin. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Santa Ana
Because the opening it’s going into is probably not square anymore. Most Santa Ana homes built between 1900 and 1950 have settled, and where a later addition meets the original structure, the seam shifts openings by a quarter to a full inch. We measure and re-check plumb at that seam before ordering glass, then shim or re-frame as needed so the panel hangs true. Call (844) 384-3361 and we’ll check your opening before you spend a dollar on glass.
Yes, they do. The combination of semi-arid air and seasonal Santa Ana wind events dries out rubber sweep and jamb seals on Mr-Glass sliding enclosures faster than you’d see in coastal cities. Seals harden and curl within a few seasons. We replace them as part of routine service and can recommend seal compounds that hold up better in this climate. For an exact assessment of your enclosure, call (844) 384-3361.
In most Santa Ana homes, yes. We remove the tub, address the framing underneath, and build a proper curb and waterproof pan before installing a Mr-Glass frameless or semi-frameless enclosure. Older pier-and-beam foundations sometimes need extra blocking, but that’s work we handle in-house. Call (844) 384-3361 and we’ll walk the bathroom with you before quoting.
We can. Mr-Glass panels are available in clear, low-iron, frosted, and rain textures, and we’ll talk through which option fits the look of your bathroom without fighting it. A 1920s Spanish Colonial with original tile wants a different glass profile than a mid-century stucco tract house. We’ll show you samples in your own room, under your own light, before you decide.
No. We are an independent contractor, not authorized, sponsored, or endorsed by Mr-Glass. We install and service their product on our own workmanship warranty, and we source genuine Mr-Glass hardware when it’s available. What we bring is on-site experience with how their systems behave in real Santa Ana houses, not a manufacturer’s patch on our sleeve. Call (844) 384-3361 for a free estimate and we’ll show you exactly what we mean.
Service Areas Near Santa Ana
We serve all of Santa Ana, including the older neighborhoods of 92706, 92707, 92711, and 92712. We also work in nearby Santa Ana service area communities and surrounding Orange County cities like Anaheim, North Tustin, Orange, and Buena Park. For work further east, see our Mr-Glass service in Phelan and Mr-Glass service in Piñon Hills pages.
Book Your Mr-Glass Service in Santa Ana Today
If you live in Santa Ana and your shower enclosure leaks, hangs off-track, or just never fit the wall right in the first place, we can get it sorted. Call (844) 384-3361 to schedule a free estimate. We’ll measure the opening at the seam, quote it straight, and do the work right.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Santa Ana, Mr-Glass in Orange, and surrounding Orange County communities for over two decades.