Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Murrieta, CA | Workshop Contractors
If you own a home in Murrieta built during the 1990s or early 2000s, there’s a good chance your original Mr-Glass shower enclosure is reaching the end of its service life right about now. We’re Workshop Contractors, and we’ve been servicing and installing Mr-Glass shower enclosures across Murrieta since these tract-home subdivisions started hitting their 20-year mark. We also offer General Contractor in Murrieta services for broader renovation needs. As an independent contractor, we handle everything from hardware replacement to full frameless enclosure swaps, and we know exactly how Murrieta’s inland heat and hard water behave against this specific glass and its hardware. Call us at (844) 384-3361 for a free estimate.
Why Murrieta Residents Choose Us for Mr-Glass Service
Noel Figueroa grew up around tradesmen who built houses with their hands, and that’s the standard he’s carried into Workshop Contractors. We’re not a shower-door-only shop. We’re a Mr-Glass sales & service team that also handles full bathroom remodels, which means when we pull an old enclosure and find water damage under the curb, we fix that too instead of bolting new glass over a rotten problem. We use OEM Mr-Glass hardware when the glass is sound because the mounting geometry matches their panels. When the track is discontinued, we find quality aftermarket equivalents after checking hole spacing.
Most of the homes we work on in Murrieta are 1990s production tract builds. That means out-of-square openings, builder-grade original glass, and shower stalls that were never meant to last 25 years in Riverside County UV. We’ve seen enough of them to know what fails first and what’s worth fixing versus replacing.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Murrieta
- Roller and pivot hardware that seizes or grinds. Murrieta’s hard water leaves mineral deposits that work into the roller bearings. After enough dry-heat cycles, the door drags or drops out of the track entirely. We replace the OEM rollers and realign the door so it glides instead of screeching.
- Silicone seals and bottom sweeps that dry out and pull loose. Riverside County summers bake the silicone until it shrinks and cracks. Water escapes onto the curb and subfloor. We remove the old seal, clean the glass edge, and install fresh sweeps that actually hold.
- Hard-water etching on 20-year-old tempered panels. The factory-applied coating fails after years of inland sun exposure, and the glass develops a white haze that won’t come off with any cleaner. When a panel is etched beyond recovery, we tell homeowners straight: a replacement enclosure is a better spend than chasing parts.
- Out-of-square builder-era openings causing binding and stress cracks. Stucco-frame tract homes settle over time, and the diagonal neo-angle openings common in Murrieta’s 1990s bathrooms shift just enough to pinch the glass. We measure the actual opening, not the original spec, and adjust the install accordingly.
- Water wicking under the curb from missing bottom sweeps. We see this constantly in Murrieta subdivisions where the original enclosure outlived its seals. By the time the homeowner notices the door won’t close, water has been working its way into the subfloor for years.
Mr-Glass Service in Murrieta: What Local Conditions Mean for Your Equipment
Here’s something that’s true in Murrieta and nowhere near as true in Mr-Glass service in Temecula or Menifee. Murrieta’s 1990s and 2000s master-planned subdivisions were built fast, with hundreds of homes per phase, and the builders used the same diagonal corner shower and tub-shower combos block after block. That means Mr-Glass enclosures aren’t failing one at a time. They’re failing in clusters, subdivision by subdivision, as each neighborhood hits the same 20-year mark at the same time. Walk through parts of the 92562 ZIP and you’ll find houses within a few streets of each other all dealing with the same dragging door hardware, the same cracked sweeps, the same etched panels. We learned this years ago when we’d get three service calls from the same tract in a single month. The houses weren’t built on the same day, but they were close enough that every original enclosure aged out together.
We recently replaced a neo-angle frameless Mr-Glass enclosure in a 1990s tract home near the Santa Rosa Plateau foothills, not far from where we handle Mr-Glass in Sedco Hills. The original rollers had seized and the bottom sweep was long gone. Water had been wicking under the curb for years. We pulled the old unit, addressed the wet curb, and installed a new Mr-Glass frameless panel set with fresh OEM hardware and sweeps. That door now glides and seals like it did when the house was new.
Mr-Glass Models & Products We Service in Murrieta
We work on the Mr-Glass product lines most common in Murrieta bathrooms:
- Frameless 3/8-inch tempered glass shower enclosures in standard pivot and bi-fold configurations.
- Semi-frameless sliding shower doors with polished chrome or brushed nickel roll-top rails.
- Neo-angle corner shower enclosures for the diagonal-entry stalls common in 1990s tract bathrooms.
- Custom-cut frameless glass tub shields and fixed glass panels for slider-over-tub remodels.
We stock OEM Mr-Glass rollers, hinges, handles, and sweeps locally for fast Murrieta turnaround. When a track has been discontinued, we source a quality aftermarket equivalent after verifying hole spacing against the original.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Murrieta
Here’s what you can expect to spend for Mr-Glass-related work in Murrieta. These ranges reflect the local market and the scope of the job.
| Service | Typical Range in Murrieta |
|---|---|
| Frameless glass shower enclosure installation | $4,500 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Bathroom remodel | $9,000 – $28,000 |
What drives the cost is glass size, hardware finish, whether we’re replacing a panel or the full enclosure, and whether the curb or subfloor needs repair after years of water exposure. A free estimate from us includes a look at the opening, the hardware, and the water situation around the curb. Call (844) 384-3361 to schedule yours.
Serving Murrieta, CA — Our Local Coverage Area
We’re based in the Murrieta area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Murrieta
Yes, in most cases the rollers are the problem and the glass is fine. We’ll check the OEM roller size and mounting geometry, and if Murrieta service area hardware is still available we’ll install it. If the bottom sweep is also shot, we’ll replace that at the same time. Call (844) 384-3361 for an exact quote.
It does. Murrieta gets hotter and drier than coastal cities, and the hard water mineral content is higher. That combination degrades silicone seals faster, builds up deposits on rollers, and etches unprotected glass over time. It’s not dramatic, but over 20 years it’s measurable.
Usually, yes, for the common finishes like polished chrome and brushed nickel. We’ll bring samples to match what you have. If the finish has been discontinued, we’ll show you what’s available and make sure it looks intentional, not mismatched.
Sometimes it does, and sometimes it doesn’t. The diagonal neo-angle openings in Murrieta’s 1990s tract bathrooms work well with a matching frameless neo-angle enclosure. If you want a true rectangular walk-in, we may need to move a wall or adjust the opening. It depends on the bathroom footprint. We’ll tell you honestly what fits and what doesn’t.
No. We’re an independent contractor. We are not authorized, sponsored, or warranted by Mr-Glass. The enclosure itself may carry a manufacturer’s warranty, but our labor and installation follow our own workmanship standard. We’ll walk you through what’s covered by whom before we start.
Service Areas Near Murrieta
Along with Murrieta, we regularly work in Mr-Glass service in Murrieta Hot Springs, Temecula, Wildomar, and French Valley. We also take calls from homeowners in Mr-Glass service in Banning who need glass shower work done right the first time.
Book Your Mr-Glass Service in Murrieta Today
If your Mr-Glass shower door is dragging, leaking, or just looks like it’s had enough inland sun, call us at (844) 384-3361. We’ll take a look, tell you what’s worth fixing and what’s worth replacing, and give you a free estimate. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Murrieta since the early 2000s.