Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Redwood City, CA | Workshop Contractors
We provide independent Mr-Glass service across Redwood City, from frameless shower enclosures to mirror assemblies and glass panel installations. What makes our Mr-Glass work different here is that we schedule glass templating around Redwood City’s split permit reality: expedited downtown precise-plan review on one side of town, seismic upgrade and soft-story permits on the other. Call (844) 384-3361 for a free estimate, and we’ll tell you which track your project actually falls on.
We’re a General Contractor in Redwood City, not a glass specialty shop. That matters because most Mr-Glass enclosure failures in Redwood City aren’t glass problems. They’re framing problems, tile problems, ventilation problems, or slab movement problems that happen to show up as a cracked panel or a binding door. Noel Figueroa grew up around tradesmen who handed him his first framing hammer, and he’s spent decades learning what happens when a glass enclosure meets a wall that was never square. Build it right the first time. The second time costs twice as much and nobody’s happy about it. We carry that into every Mr-Glass job we take in Redwood City.
And to be plain: we’re independent. Not authorized by Mr-Glass, not sponsored, not warranty-endorsed. We say that up front because you should know who you’re hiring.
Why Redwood City Residents Choose Us for Mr-Glass Service
We’ve installed and repaired Mr-Glass frameless hinged shower enclosures, sliding bypass door systems, and custom mirror assemblies in enough Redwood City homes to know how the brand’s hardware and sealing systems actually behave in San Mateo County conditions. A Mr-Glass enclosure that works flawlessly in a brand-new downtown townhome can start binding or leaking in a 1950s ranch in the flats, and the difference usually isn’t the glass. It’s the house it went into.
Our people know the difference between a hinge that failed because of cheap hardware and a hinge that failed because the wall it was anchored to was out of plumb by a quarter inch. We use genuine Mr-Glass hardware and replacement sweeps, seals, and rollers where the profile is available, and we only reach for a quality aftermarket equivalent when a discontinued model leaves no OEM path. Glass thickness and hinge load rating always get matched, never guessed. When you call us, you’re not handing your bathroom over to a crew that’s never opened up a wall in a Redwood City bungalow before. You’re working with a contractor that’s been inside these houses and knows what’s behind the tile.
Noel Figueroa’s background runs through framing, tile, and finish work that has to hold up under a second look. That’s the standard we bring to Woodside Mr-Glass service and every Redwood City job we take on.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Redwood City
- Worn or corroded rollers on Mr-Glass bypass doors. Bathrooms with poor ventilation accelerate corrosion on top-rail roller hardware, and added showers in converted alcoves with no exhaust fan are a regular find in older Redwood City Victorians and bungalows in 94061 and 94063. We replace worn rollers with genuine Mr-Glass hardware, then discuss ventilation options so the new set doesn’t fail the same way.
- Silicone seals and sweeps pulling away at the curb. Hillside homes in 94062 sit on expansive clay that moves seasonally. A rigidly anchored Mr-Glass panel doesn’t flex with that movement, so seals tear and panels crack or gap at the wall. We inspect the slab, reposition anchoring where it’s needed, and re-seal with materials matched to the enclosure’s original profile.
- Binding doors and glass-to-wall gaps in out-of-square openings. Pre-1950 core homes and piecemeal additions in Redwood City rarely have openings that are square and plumb. A Mr-Glass framed slider templated to the framed opening rather than the finished tile will bind from day one. We re-check level at the curb and shim hinges before installing or repairing enclosures in these older homes.
- Glass edge chipping and hinge-point stress cracking. Postwar ranch bathrooms that were re-tiled without adding blocking behind the tile leave hinge anchors floating in drywall. The glass cracks at the hinge point because it has nothing solid to bear against. We find this constantly in Redwood City’s flatland neighborhoods and fix it by opening the wall, installing proper blocking, then re-mounting the hardware.
- Mr-Glass frameless panel gaps that grow over one season. Homes in the western hills and downslope lots move more than homeowners expect. A Mr-Glass frameless panel with a tight gap at the wall can gain or lose an eighth inch over a single rainy season if the curb wasn’t level or the wall wasn’t properly shimmed. We set panels with movement in mind, not just for a tight first-day fit.
That said, we don’t recommend homeowners try to fix a Mr-Glass enclosure themselves. Glass panels are heavy, tempered glass can shatter violently if stressed the wrong way, and the hinge points carry real tension. A trained professional should handle any repair involving glass removal, hinge work, or panel adjustments.
Mr-Glass Service in Redwood City: What Local Conditions Mean for Your Equipment
Redwood City actively courts development, and the building department’s attention gets split between expedited downtown infill review under the downtown precise plan and seismic and soft-story upgrade permits in the older core. What that means for Mr-Glass owners is practical: a Home Remodeling – Redwood City project with a shower enclosure scheduled inside a 94061 or 94063 bungalow remodel can stall at the counter behind a downtown mid-rise submittal if nobody has aligned the glass templating and inspection milestones with whichever review track the job is on. We’ve watched this happen. The permit isn’t the hard part. Keeping the enclosure from becoming the thing that delays final inspection is.
That’s why we plan Mr-Glass installations in Redwood City around the permit track, not just the construction schedule. If your remodel is moving through expedited downtown review, we template early and have the panel ready when the opening is finished. If it’s a hillside seismic upgrade, we know the structural inspection happens before the finishes, and we schedule glass work after the studs are signed off but before the tile crew leaves the job. Homeowners who’ve had a Mr-Glass enclosure measured and then waited six weeks for glass while a permit sat in review understand why this matters. It’s the part of the job nobody sees until it’s the thing holding up their shower.
On one 1950s ranch home in the flats near Redwood City’s older core, the owner wanted a tub-to-shower conversion, and the original alcove was neither square nor plumb after decades on that slab. We re-checked level at the curb and framed new blocking behind the tile before we templated a frameless Mr-Glass hinged enclosure, then set the panel with shimmed hinges and fresh sweeps so the door closed true against the wall instead of the header. The finished install sits flush with no gap creep after a full rainy season. That’s the kind of detail that doesn’t show up in a photo but shows up every time the door closes.
This is the Mr-Glass sales & service knowledge we bring to every Redwood City job, and it’s why homeowners in the older core and the hills call us when their enclosures start acting up.
Mr-Glass Models & Products We Service in Redwood City
We work on the full Mr-Glass residential line. Frameless hinged shower enclosures in 3/8″ and 1/2″ tempered glass, both headerless and low-profile header mount setups. Sliding bypass shower door systems with top-rail roller hardware. Frameless neo-angle corner enclosures for diagonal-alcove showers. Custom mirror and glass panel assemblies for bath and interior applications. If the profile is still in the Mr-Glass catalog, we order from that line. If it’s discontinued, we match glass thickness and hinge load rating with a quality aftermarket equivalent that fits the existing opening without re-engineering the wall.
We keep common sweeps, seals, and rollers stocked for faster Redwood City turnarounds, and we measure with the finished tile in place, never the framing dimensions.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Redwood City
Here’s what Mr-Glass installation and replacement work typically runs in Redwood City. These are market-calibrated ranges, not a bid for your specific bathroom, but they’ll give you a realistic starting point.
| Service | Typical Range |
|---|---|
| Frameless Glass Shower Enclosure | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What actually drives the cost is the condition of the opening. An out-of-square alcove in a 1920s bungalow takes more shimming, more blocking, and more time than a framed opening in a newer townhome. We give you a written line-item quote so you can see exactly where the money goes. Call (844) 384-3361 for a free estimate, and we’ll walk the space before we quote anything.
Serving Redwood City, CA — Our Local Coverage Area
We’re based in the Redwood City area and know this community well, and we also handle Mr-Glass in West Menlo Park. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Redwood City
It depends on the project. A standalone shower enclosure replacement in an existing bathroom typically moves through the standard residential permit track, but if it’s part of a larger remodel in a downtown building subject to the precise plan, it rides along with that project’s review. We identify which track applies before we schedule templating, so the glass doesn’t become the delay. Call (844) 384-3361 and we’ll help you figure out where your job falls.
Seasonal binding in Redwood City usually means the slab or floor assembly is moving. Hillside lots on expansive clay in 94062 and downslope properties shift with soil moisture changes, and a Mr-Glass door set too tight at the curb will bind when the floor rises or drops. We level the curb, adjust the hinges, and reset the panel with enough tolerance for that movement instead of forcing the door to fit a floor that won’t stay still.
Yes, if the glass is sound. We’ll replace worn rollers, hinges, sweeps, and seals with genuine Mr-Glass parts where the profile is available, and only recommend full replacement when the glass itself is chipped at the hinge or the panel has gone out of square with the wall. We don’t sell a replacement when a repair does the job. Call (844) 384-3361 and we’ll tell you which side of that line your enclosure is on.
It accelerates corrosion on roller and hinge hardware, especially on frameless bypass units where the top-rail mechanism sits in warm, humid air. Older bungalows in 94061 and 94063 often had bathrooms retrofitted without ventilation, and we see the hardware fail years earlier than it should. We’ll repair the enclosure with the right hardware, then talk through ventilation options so the next set lasts longer.
You always template to the finished tile, never the framing. Tile thickness, thinset, and waterproofing change the opening dimensions, and a Mr-Glass enclosure ordered from framing measurements will gap or bind. We measure after the tile is set and the curb is final, then order the enclosure to those actual dimensions. It’s the only way to get a clean install in Redwood City’s older, out-of-square homes. Call (844) 384-3361 for an exact quote on your project.
Service Areas Near Redwood City
Our Mr-Glass service covers all of Redwood City service area, including 94061, 94062, 94063, 94064, and 94065. We also work across the wider San Mateo County corridor and into neighboring communities, including Mr-Glass service in Emerald Lake Hills and Mr-Glass service in San Carlos, as well as Woodcrest, North Fair Oaks, and the surrounding areas.
Book Your Mr-Glass Service in Redwood City Today
If your Mr-Glass enclosure is binding, leaking, or cracked in a Redwood City home, we’ll come look at it. Estimates are free, and we’ll tell you honestly whether you need a repair or a replacement. Call (844) 384-3361 to schedule yours.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Redwood City since he picked up his first framing hammer.