Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in La Selva Beach, CA | Workshop Contractors
We’re an independent construction team that installs and repairs Jerith aluminum fencing, gates, and railings across La Selva Beach. We know these product lines inside out because we’ve worked with them on sand-based lots along Monterey Bay for years. The one thing that sets our Jerith work apart here: we build for shifting sand and salt air, not just for looks. Call (844) 384-3361 to talk through your fence or gate project.
Why La Selva Beach Residents Choose Us for Jerith Service
We’re not a fence subcontractor that happens to carry Jerith. We’re a general contractor that has pulled Jerith’s aluminum systems apart, rebuilt them, and installed them on coastal lots where the ground moves. That’s a real distinction. Noel Figueroa, the owner here at Workshop Contractors, learned framing and finish work from the same generation of tradesmen who built half the houses on his street in Ontario. That background means we approach fence work the way we approach any structural job: check the footing, check the hardware, check what the salt and sand will do in five years. In La Selva Beach, that’s not optional.
We also understand this is a small, tight community. Projects here are reviewed closely by Santa Cruz County, neighbors talk, and nobody wants a fence that leans after one winter storm. Our Jerith service in La Selva Beach is built around that reality. For more on how we work across this area, see our La Selva Beach service area page.
Styles & brands we work with
Common Jerith Construction Problems We Solve in La Selva Beach
Here’s what we see repeatedly on Jerith fences and gates in Aptos Hills-Larkin Valley and this stretch of Monterey Bay:
- Post footings loosening as sand shifts. Winter storms and groundwater movement under sandy lots push and pull at post bases. We regularly find Jerith posts that were set in shallow concrete and have since developed a lean or a full sink line.
- Salt-air corrosion on aluminum and hardware. Marine layer fog doesn’t just dampen the surface. It carries salt that settles into hinges, latch mechanisms, and fasteners, causing pitting and seized bolts on fences that would look fine inland.
- Wind-driven rain getting into hinges and latches. The wind off Monterey Bay can drive rain horizontally. Gate hardware on Jerith fences here takes that hit directly, which accelerates wear and causes gates to sag or bind.
- Sand erosion exposing post concrete. After a few heavy rain events, water carves channels around post bases on low-lying lots. We’ve seen concrete collars sitting proud of the sand by two or three inches, with the post now wobbling inside.
- Rusted steel gates mixed into aluminum fence runs. La Selva Beach has plenty of older steel gates that were paired with aluminum fence sections. The steel corrodes faster than the Jerith aluminum, and the first sign is usually a gate that drags on the latch side.
Jerith Service in La Selva Beach: What Local Conditions Mean for Your Equipment
Because La Selva Beach sits on unincorporated Santa Cruz County land, a Jerith fence or gate project here must be permitted through the County, and many residential sites in the Sand Dollar Beach tract and other shore-adjacent areas require a coastal development permit. That layer of review simply doesn’t exist for a similar fence in Capitola or Watsonville. It means the timeline includes plan review, and it means the County will look at how your fence interacts with setbacks, dune conditions, and drainage. We handle that paperwork as part of our general contracting scope. You don’t have to become an amateur coastal-permitting expert. What you do need to know is that the sand your Jerith fence sits on is genuinely beach sand that shifts with winter storms and groundwater, so footings need to be deeper and wider than standard practice. A fence that would be perfectly stable on clay in Watsonville can lean fast on a saturated La Selva Beach lot. We dig for that difference on every job.
Jerith Models & Products We Service in La Selva Beach
We work on the full Jerith line we see most often along this coast: Infinity, Renaissance, Grandview, and Guardian. For critical connections and hardware, we use OEM Jerith parts so the structural interface stays factory-spec. But we also source high-quality aftermarket stainless components when they offer better corrosion resistance than the original spec, which matters a lot in salt air. We keep common post caps, gate latches, and stainless fasteners on hand for typical La Selva Beach repairs, and we can pull most model-specific Jerith sections within a few days. For more on our broader Jerith work, see our Jerith sales & service page.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Jerith Fence Work Cost in La Selva Beach?
Pricing depends on fence length, sand conditions, and whether we’re replacing footings or starting fresh. Here’s where La Selva Beach projects typically land:
| Service | Typical Range in La Selva Beach |
|---|---|
| Aluminum Fence Installation (Jerith) | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
What drives cost here more than anything is the footing work. Sand-based lots often need deeper posts and wider concrete collars, which adds labor and material. Our estimates are free and line-itemed, so you see exactly where the money goes. Call (844) 384-3361 and we’ll walk the property with you.
Serving La Selva Beach, CA — Our Local Coverage Area
We’re based in the La Selva Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in La Selva Beach
Sandy soil doesn’t hold posts the way clay does. For Jerith repair in Day Valley and here, we set posts at least 36 inches deep with wider concrete collars than you’d use inland, and we compact the surrounding sand in lifts. That keeps the fence from leaning when winter storms saturate the ground.
In many shore-adjacent parts of La Selva Beach, yes. Because this is unincorporated Santa Cruz County land, fencing and gate work can trigger coastal development review through the County and the Coastal Commission. We pull those permits and handle the submittals. Call (844) 384-3361 and we’ll check your specific lot.
The Jerith Infinity and Renaissance lines hold up well here because their aluminum profiles are designed to resist surface pitting. The real weak point is hardware, so we upgrade hinges and latches to stainless steel on most coastal installs. Grandview and Guardian work too, but we’ll adjust the hardware spec for the marine layer.
Usually yes. We reset the gate post on a deeper footing, replace the hinges if salt has seized them, and re-hang the gate so it clears cleanly. If the gate frame itself has twisted, replacement is sometimes cheaper than repeated repairs. Estimating is free.
With proper footings and stainless hardware, a Jerith aluminum fence here can go 20 to 25 years before it needs significant work. Without those upgrades, salt corrosion and sand movement can cut that in half. We build for the longer number.
Service Areas Near La Selva Beach
We run Jerith fence and gate service down the coast to Jerith service in Rio Del Mar and over to Jerith service in Aptos. We also cover Capitola, Soquel, and Watsonville. If you’re on the bay side of Highway 1, we’re close by.
Book Your Jerith Service in La Selva Beach Today
If your Jerith fence is leaning in the sand or your gate is fighting the salt air, call (844) 384-3361. We’ll get out to La Selva Beach, look at the footings, and give you a straight answer on repair versus replacement. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner at Workshop Contractors, serving La Selva Beach since day one.