Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Broadmoor, CA | Workshop Contractors
We install, repair, and service Jerith ornamental aluminum fencing throughout Broadmoor, CA (94015), and provide South San Francisco Jerith service as well. The one thing that sets our Jerith work apart here: we know Broadmoor sits in unincorporated San Mateo County, so your fence gets county permits and county inspections, not Daly City’s, and we handle that correctly from day one. We’re an independent contractor, not affiliated with or authorized by Jerith, and we service existing runs as often as we install new ones. Call (844) 384-3361 for a free estimate.
Why Broadmoor Residents Choose Us for Jerith Service
Noel Figueroa grew up around tradesmen in Ontario’s Vineyard neighborhood, where a framing hammer got put in his hands early and the standard was always square corners and finish work that holds up under a second look. That’s the standard we bring to every Jerith fence we touch in Broadmoor. We know these fences aren’t just panels and posts. They’re lot-line markers, pool barriers, and street-facing curb appeal on some of the tightest lots in San Mateo County. We also know Broadmoor’s fog belt punishes aluminum fencing differently than anywhere a few miles inland. When you call us about a Jerith gate that won’t latch or posts rusting at grade, we’re not guessing. We’ve pulled enough of these systems apart on post-war tract lots here to know exactly what the coastal moisture is doing to the finish, the fasteners, and the footings. We use genuine Jerith replacement panels and pickets where the profile and color are still available, and we stock corrosion-rated hardware for the repairs where an aftermarket stainless component will outlast what the factory shipped. Any Jerith specialist can swap a panel. We fix the reason it failed.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Broadmoor
- Finish breakdown from persistent fog. Broadmoor’s coastal fog keeps Jerith powder-coat surfaces wet for long stretches. On tightly packed lots with little air movement, that trapped moisture causes chalking, blistering, and coating failure years before the aluminum underneath gives out. We strip, prep, and re-coat or replace affected sections so the finish doesn’t keep peeling.
- Post corrosion at grade from wet tract soil. Broadmoor’s heavy, clay-ish soil holds water against post footings. Older Jerith posts set in concrete that wasn’t sloped to shed water rust right at the base. The fence looks fine up top while the bottom of the post quietly fails. We reset post bases with sloped, water-shedding concrete collars and replace posts that are too far gone.
- Seized and pitted gate hardware. The salt-laden fog air attacks hinges, latches, and panel brackets. Stainless and painted fasteners pit and seize, so gates sag or stop latching even when every panel is structurally sound. We re-hang gates with corrosion-rated stainless hardware and adjust the swing so the latch actually catches.
- Wood-to-metal rot at tie-in points. Many Broadmoor homes date to the 1940s and 1950s. Where a Jerith run was tied into wood posts or wood privacy framing, the wet coastal air rots the wood surround and pulls the aluminum system out of line. We repair the wood, re-anchor the aluminum, and restore the run.
- Sagging and misaligned panels on small, setback-constrained lots. Broadmoor’s tiny tract lots mean fence lines run close to structures and property lines. When footings shift or wood surrounds rot, panels go out of square fast. We re-level, re-anchor, and make the line visually straight again.
Jerith Service in Broadmoor: What Local Conditions Mean for Your Equipment
Broadmoor is unincorporated San Mateo County. That sounds like a zoning footnote until a fence serves as a lot-line marker or pool barrier. Then it goes through county building permits and county inspection, not Daly City’s process. A contractor used to pulling Daly City permits will get red-tagged on the county’s requirements, and we’ve seen it happen more than once. The tiny tract lots add another layer: fence height and placement get checked against setback and lot-coverage rules the county applies, not the city’s. On a fog-belt tract block in Broadmoor we tore out a failing Jerith aluminum perimeter run where the posts had rusted at grade from years of wet footing soil and the gate hardware had seized solid in the salt air. We reset the post bases with sloped, water-shedding concrete collars, swapped in genuine Jerith pickets and panels for the badly corroded sections, and re-hung the gates with corrosion-rated stainless hardware. Then we walked the county inspection through the lot-line setback since the property sits in the unincorporated enclave. The customer got a square, smoothly latching fence instead of a full tear-out. That’s the difference between knowing Jerith and knowing Broadmoor.
Jerith Models & Products We Service in Broadmoor
We work on the full Jerith residential and contractor-grade range, including Jerith Pennance ornamental aluminum fence, Jerith Ridgewood residential aluminum fence, Jerith contractor-grade aluminum pool and security fence, and Jerith coordinating aluminum gate systems. Our parts approach is straightforward: genuine Jerith replacement panels, pickets, and brackets where the profile and color are still available so the run stays visually matched, and quality aftermarket hinges, latches, and corrosion-rated fasteners where OEM parts are discontinued or where a better stainless component will outlast the original. We repair when it’s a footing, fastener, or single-panel fix. We only recommend replacement when the finish or post bases are failing across a whole run. For more on our Jerith work, see Jerith sales & service.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Broadmoor
Jerith fence repair pricing in Broadmoor — and our Jerith service in Pacifica — depends on what actually failed. A single-panel or hardware replacement runs $400 to $1,800. Post resetting, gate re-hanging, and finish work each add their own line item. Here’s the breakdown:
| Service | Price Range |
|---|---|
| Fence repair / single-panel and hardware replacement | $400 – $1,800 |
A free estimate gives you a written line item breakdown before any work starts. You’ll know exactly what we’re replacing, what we’re repairing, and what it costs. Call (844) 384-3361 to schedule yours.
Serving Broadmoor, CA — Our Local Coverage Area
We’re based in the Broadmoor area and know this community well, and we also handle Jerith repair in Colma and nearby communities. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Broadmoor
No. In Broadmoor, a gate that won’t latch is almost always a hardware problem first. Salt-laden fog air pits hinges, latches, and brackets until they seize or sag. We re-hang the gate with corrosion-rated stainless hardware and adjust the swing. The panels are usually still sound. Call (844) 384-3361 and we’ll tell you what’s actually wrong.
Broadmoor’s clay-ish soil holds standing moisture against the footing, and older posts set in concrete that wasn’t sloped to shed water rust at grade. The rust works from the bottom up while the visible post still looks fine. We reset the base with a water-shedding concrete collar or replace the post if it’s too far gone. Estimates are free.
County. Broadmoor is unincorporated San Mateo County, so fences serving as lot-line markers or pool barriers go through county building permits and county inspection. We handle the permit and inspection for you. Call (844) 384-3361 and we’ll walk you through what your specific fence needs.
Yes. We source genuine Jerith replacement panels and pickets in the matching profile and color where they’re still available, so the repaired section blends with the rest of the run. If the exact color has been discontinued, we’ll show you the closest match before any work starts.
Not if the repair addresses the moisture path. We focus on sloped concrete collars, corrosion-rated fasteners, and proper drainage at the base, because Broadmoor’s fog belt punishes anything that traps water. The right materials and the right footing details buy you years of clean fence. Call (844) 384-3361 for a repair plan specific to your lot.
Service Areas Near Broadmoor
We service Jerith fencing across the peninsula and beyond. In addition to Broadmoor, our team covers Broadmoor service area communities including nearby Daly City, Jerith service in Daly City, South San Francisco, Pacifica, and Jerith service in Mission District.
Book Your Jerith Service in Broadmoor Today
If your Jerith fence is rusting, sagging, or just not latching right, call (844) 384-3361. We’ll schedule a free estimate, walk the line, and tell you exactly what needs repair and what doesn’t.
Written by Noel Figueroa, Owner & General Contractor – Broadmoor at Workshop Contractors, serving Broadmoor and the surrounding peninsula since 2006. Build it right the first time. The second time costs twice as much and nobody’s happy about it.