Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in San Martin, CA | Workshop Contractors
We provide independent Unilock installation and repair across San Martin as a San Martin General Contractor, and the thing that sets our work apart is that we build for county inspection, not just curb appeal. San Martin is unincorporated Santa Clara County, which means your paver driveway, patio, or retaining wall has to satisfy county building permits and CalFire defensible-space review, not a city hall clerk. As an independent contractor, we handle the full Unilock system on its merits: proper base, proper edge restraint, proper drainage. Call (844) 384-3361 for a free estimate on Unilock work that holds up under county scrutiny and valley clay.
Why San Martin Residents Choose Us for Unilock Service
We’ve torn out enough failed Unilock work in San Martin to know exactly what goes wrong when the base layer gets shortchanged. Noel Figueroa, our owner and general contractor, learned framing and finish work the hard way, starting with a framing hammer handed to him by the tradesmen who built half the houses on his street in Ontario’s Vineyard neighborhood. That background matters when we’re rebuilding a paver patio over expansive clay: we measure twice, compact in lifts, and don’t call a base done until it drains. Homeowners here tend to do their homework. They ask about aggregate depth, geotextile placement, and why edge restraint matters on a horse property where trucks and trailers cross the hardscape. We answer those questions with specifics because we’ve done the work. We source genuine Unilock units and matching edge restraints where the color and profile still exist, and we stock quality aggregate, geotextile, and polymeric joint sand for fast San Martin turnaround. One contractor. Every trade. The hidden layers never get outsourced.
Styles & brands we work with







Common Unilock Construction Problems We Solve in San Martin
- Base failure over expansive valley clay. San Martin’s shrink-swell soils move with every wet-dry cycle, and a thin aggregate base lets Unilock pavers settle and rock after the first rainy season. We rebuild with 6+ inches of compacted aggregate and geotextile so the field stays flat.
- White chalky efflorescence on Brussels Block pavers. San Martin’s hot, dry summers pull soluble salts to the surface of concrete pavers, and irrigation overspray makes it worse. We clean and re-sand affected areas, then flag the overspray issue so it doesn’t come back.
- Polymeric sand washout on slopes and at downspout discharge points. Winter rains concentrate flow, and if drainage wasn’t graded away from the house originally, the joints erode. We re-grade and re-pack joints with proper polymeric sand, and fix the drainage path before it fails again.
- Chipping and spalling on Beacon Hill wall caps and step units. Full afternoon sun plus freeze-thaw at night weakens exposed edges over time. We cut and set new units, color-matched to the existing wall, and build the cap detail to shed water rather than hold it.
- Weed intrusion behind walls built without filter fabric and drainage stone. Winter rain carries fines into the wall, weeds root, and the wall starts to lean. We rebuild the wall section with fabric, clean drainage stone, and a proper weep path so the structure stays dry.
Unilock Service in San Martin: What Local Conditions Mean for Your Equipment
Here’s the thing most contractors from Morgan Hill or Gilroy would miss: San Martin is unincorporated Santa Clara County, so hardscape work that touches grading, drainage, or a new impervious driveway surface runs through county building permits and CalFire defensible-space review instead of a city counter. That means our Unilock base and drainage have to be documented for county and fire-district inspection, not just laid to look good from the road. On a horse property off Llagas Road, we tore out a ten-year-old Brussels Block patio that had heaved and rutted because the original base was too thin over the valley clay. We rebuilt it with 6 inches of compacted aggregate, geotextile, and new edge restraint pinned to resist rain-heavy winters. The owner also needed the pavers set back from the defensible-space zone around the barn, so we re-graded drainage to sheet away from the structure before re-laying the field, matching the existing color and cutting new step units where the old ones had chipped. If your contractor doesn’t bring up CalFire at the estimate, walk away. We bring it up on the first call because we’ve had to fix jobs where it was ignored.
Unilock Models & Products We Service in San Martin
We work across the Unilock line: Brussels Block and Brussels Dimensional pavers for driveways and patios; Beacon Hill and Beacon Hill Flagstone wall units for seat walls and garden terraces; Bristol Valley and Copthorne for a more natural field look; and Ledgestone and Rivercrest retaining wall systems for grade changes. We also service the Unilock sales & service side of older installations: color-matching discontinued runs, replacing chipped step units, and re-sanding worn joints. When a Unilock color or profile is still in production, we source genuine units from our distributors and match the field. When it’s discontinued, we tell you straight: a patch that never blends is worse than a tear-out-and-replace of the affected area. We’d rather you spend once on the right fix than twice on a bad patch. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in San Martin
What you’ll pay depends on square footage, soil prep, and whether we’re pulling a permit. Here’s what current San Martin work runs:
| Unilock Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
Base prep is the line item people forget. On San Martin clay, a proper 6-inch compacted aggregate base with geotextile is non-negotiable, and it’s the difference between a driveway that still drains in five years and one that ruts after the second winter. A free estimate includes a site walk where we check slope, drainage, access, and permit path, then give you a written line-item quote. Call (844) 384-3361 and we’ll walk the property with you.
Serving San Martin, CA — Our Local Coverage Area
We’re based in the San Martin area and know this community well, including nearby Unilock in Corralitos. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in San Martin
Does a Unilock paver driveway in San Martin need a county permit? Generally yes. Because San Martin is unincorporated Santa Clara County, a new impervious driveway surface or significant re-grading triggers county planning review and possibly CalFire defensible-space requirements, depending on the site. We handle the permit paperwork and schedule the inspections as part of the job. Call (844) 384-3361 if you want us to check your specific parcel.
Why do my Unilock pavers look chalky white in the summer? That’s efflorescence, mineral salts wicking up through the concrete paver in San Martin’s hot, dry summers. It’s cosmetic, not structural, but irrigation overspray keeps feeding it. We clean the field, re-sand the joints, and adjust the irrigation heads or grade so water stops pooling on the pavers. Give us a call at (844) 384-3361 if it’s spreading.
Can you match my discontinued Unilock wall units? Sometimes. If the original color and profile are still in production, we source genuine units and match the field closely. If the line is discontinued, we’ll tell you directly that a patch will always show, and recommend replacing the affected wall section rather than leaving a visible splice. Estimates are free: call (844) 384-3361.
How do you handle drainage on a Unilock patio on a slope? We grade the base to move water away from the house first, install edge restraint that won’t wash out, and pack joints with polymeric sand rated for slope use. Downspout discharge gets directed away from the field before we lay a single paver. That’s standard on our San Martin jobs, because winter rain cuts through sloppy slope work fast. Call (844) 384-3361 and we’ll look at your grade.
Do you build Unilock walls near horse barns and defensible space? Yes, and we’ve done it on properties off Llagas Road where the CalFire defensible-space zone dictated the wall setback. Walls and hardscape can actually help create a non-combustible surface near structures, but the grading and drainage still need to be documented for fire-district review. We handle the whole path, from county permit to final inspection. Call (844) 384-3361 for specifics on your property.
Service Areas Near San Martin
We serve San Martin and the surrounding South County, including Morgan Hill, Gilroy, and the residential pockets between them. If you’re in the 95046 ZIP or nearby unincorporated county land, we’re familiar with the permit path you’ll need. We also run Unilock work in San Martin service area and adjacent communities like Unilock service in Freedom and Unilock service in Amesti. Same crew, same standards, same county inspection mindset.
Book Your Unilock Service in San Martin Today
We’re scheduling estimates for paver driveways, patios, and wall work across San Martin. Call (844) 384-3361 and we’ll walk your property, check the permit path, and give you a written quote. One contractor. Every trade.
Written by Noel Figueroa, Owner at Workshop Contractors, serving San Martin and the surrounding Santa Clara Valley since day one.