Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Anza, CA | Workshop Contractors
We install, refit, and repair KraftMaid cabinetry across Anza as an independent contractor, not a dealer or authorized service center. What sets our KraftMaid work in Anza apart is that we build for high-desert reality: freeze-thaw cycles, manufactured-home framing, and unpaved road access. Call (844) 384-3361 for a free estimate on your KraftMaid kitchen or cabinet project.
Why Anza Residents Choose Us for KraftMaid Service
We’re a KraftMaid sales & service contractor who works with the full Vantage, Aspire, Mid-Continent, and RTA lines, so we’re not guessing when we assess your cabinets. Noel Figueroa, our owner and general contractor, learned framing and finish work the old way: on job sites across the Inland Empire, from ground-up builds to full remodels. That means when we open a KraftMaid box in Anza, we know exactly how it should sit against a wall that a production framer never touched. We match genuine KraftMaid OEM fronts and hinges where the factory part is still available, and we carry premium independent hardware for when OEM is discontinued or slow. Free estimates, written line-item quotes, and one crew responsible from tear-out to trim.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Anza
- Door and drawer face swing after freeze-thaw. Anza drops below freezing on winter nights, and those swings work on KraftMaid hinges and box joints until doors start to rack. We true the boxes, reset the hinge plates, and upgrade to soft-close hardware that holds alignment through the next hard freeze.
- UV-cracked painted and glazed finishes. High-desert sun at 4,000 feet is relentless, especially on south-facing cabinet runs by a kitchen window. We see KraftMaid painted finishes crack and glaze dull faster here than in low-desert installs. We reface or replace affected fronts and can steer you to finishes that hold up under Anza’s light.
- Swell and delamination at the sink base and toe-kick. Older manufactured homes on multi-acre parcels often run well and septic systems that leak slowly. That moisture wicks into KraftMaid particleboard side panels and swells them. We cut out the damage, seal the base, and reinstall with proper clearance so it doesn’t happen again.
- Racking wall cabinets on manufactured-home walls. Mobile-home studs aren’t always where they should be, and Anza’s stock has plenty of out-of-square walls. KraftMaid wall cabinets pull loose and doors stop aligning. We locate real studs, add blocking where needed, and hang the boxes so they stay square.
- Unpaved-road delivery damage. Cabinets that bounce down a dirt road in the back of a truck can arrive with shifted joints and scuffed faces. We plan delivery runs around road conditions, inspect every box on arrival, and catch damage before it reaches your kitchen.
KraftMaid Service in Anza: What Local Conditions Mean for Your Equipment
The biggest thing people miss about KraftMaid cabinetry in Anza is that most of the housing stock here was never built to site-built tolerances. A manufactured home on a multi-acre parcel off a dirt road in 92539 usually has framing that’s an eighth-inch to a quarter-inch out of square across a single wall run. KraftMaid boxes are built square at the factory, so an installer who just shims and hopes gets doors that bind and drawers that close crooked. We treat every KraftMaid install in Anza as a fitting job, not a drop-in job, and we bring the same precision to our Valle Vista KraftMaid service: we true the wall, add blocking behind the hang points, and set the boxes to the house, not to the print. That’s the difference between a kitchen that works for a decade and one that fights you from day one.
KraftMaid Models & Products We Service in Anza
We work on the full KraftMaid range: Vantage with its all-plywood box and full-access drawers, the Mid-Continent Cabinetry (MCC) series, the Aspire premium full-access line, and KraftMaid ready-to-assemble and flat-pack kitchen cabinets. For parts, we match genuine KraftMaid OEM door fronts, hinges, and drawer boxes when the factory still stocks them. When OEM is discontinued or backordered, we move to premium independent hardware: soft-close hinges, full-extension slides, and matched finishes that don’t look like an afterthought. We keep common KraftMaid hinge plates, clips, and bumpers on the truck for Anza calls, so a loose door doesn’t wait on a parts shipment from Ohio.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Anza
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives cost in Anza: out-of-square wall correction, unpaved-road delivery logistics, and whether you’re repairing one box or replacing a full run. Your free estimate includes a site walk, measurements, and a written line-item quote so you know exactly where the money goes. Call (844) 384-3361 to schedule yours.
Serving Anza, CA — Our Local Coverage Area
We’re based in the Anza area and know this community well, and we also provide Idyllwild KraftMaid service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Anza
No, we’re an independent contractor serving Anza and the surrounding high-desert communities, not a KraftMaid dealer tied to a showroom. We carry OEM-matched parts on the truck and can order factory fronts and hinges directly without sending you through a retail channel. Call (844) 384-3361 and describe what you’re seeing; we’ll tell you whether it’s a repair or a replace conversation.
Yes, and we see it every winter in Anza. Boxes and faces expand and contract through freeze-thaw cycles, and over a few seasons the hinges and joints work loose enough that doors sag and drawers bind. The fix is usually hinge plate resetting and box truing, not a full replacement. Call (844) 384-3361 for a free check on a sagging door before it gets worse.
Yes, but they need a fitting installer, not a drop-in one. KraftMaid boxes are built square at the factory; Anza’s manufactured-home walls often aren’t. We true the wall, add blocking, and set the boxes to the house so doors close square and drawers slide straight. Call (844) 384-3361 and we’ll measure your walls before you order anything.
If one sink base has swelled from a slow well or septic leak, that’s usually a repair: cut out the damage, seal the base, reset the cabinet. If three boxes have delaminated and the finish is failing across the run, replacement is the honest call. Call (844) 384-3361 for an assessment that tells you which one you’re actually facing.
Yes. We plan deliveries around weather and road conditions on Anza’s unpaved and private roads, inspect every box on arrival, and catch transit damage before it reaches your kitchen. Our crew handles the access logistics so you don’t have to coordinate a separate drop. Call (844) 384-3361 to schedule your free estimate and we’ll walk the access route with you.
Service Areas Near Anza
We run KraftMaid service throughout the Anza service area and into the neighboring high-desert and Inland Empire communities, including KraftMaid service in Yucca Valley, KraftMaid service in Desert Edge, Woodcrest, and Loma Linda. If you’re within an hour of Anza, call and we’ll tell you straight whether we can get a crew to your parcel.
Book Your KraftMaid Service in Anza Today
We fit KraftMaid cabinets to Anza’s houses the way they actually are: out-of-square, freeze-cycled, and often at the end of a dirt road. Call (844) 384-3361 for a free estimate and a written line-item quote. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Anza and the Inland Empire since his first framing hammer.