Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Belvedere, CA | Workshop Contractors
We provide independent KraftMaid cabinet installation, refacing, and full kitchen remodeling across Belvedere, from the flats near the lagoon up to the steepest hillside lots off Golden Gate Avenue. The one thing that makes our KraftMaid work here different: we’ve spent years learning how coastal fog, design-review lead times, and narrow delivery routes interact with this brand’s construction. Call (844) 384-3361 and we’ll walk you through what your kitchen actually needs.
Workshop Contractors is our General Contractor in Belvedere, not a KraftMaid dealer. That means we carry no sales quota and no push to put a particular line in your kitchen. What we do carry is a decade of hands-on time with KraftMaid’s cabinet lines, their hinge systems, their finish behavior in marine air, and what happens when a particleboard box meets a Belvedere winter. Independent service means we source what fits, not what’s in stock at a showroom.
Our service area covers the 94920 ZIP and we know these hills. We know Belvedere service area streets where a delivery truck will block the whole grade for twenty minutes and where a crane placement is the only option. We schedule around that.
Why Belvedere Residents Choose Us for KraftMaid Service
Noel Figueroa, our owner and general contractor, grew up around tradesmen who framed houses, hung cabinets, and finished trim to the corner. He came up through Chaffey College’s construction technology program, which put him on actual job sites before he could rent a truck, and he’s spent the decades since building everything from ground-up homes to full commercial tenant improvements. When we look at a KraftMaid cabinet box, we see how it was put together, where the stress will land, and what the next ten years of Belvedere air will do to it.
We use OEM KraftMaid hinges and drawer slides wherever they’re available, because the hole patterns and stop angles matter. When OEM parts are backordered, we use high-quality aftermarket soft-close dampers and reinforcement brackets that we’ve tested on Belvedere jobs. You get the right fit rather than a story about “universal” hardware that isn’t.
Most homeowners don’t realize how many systems in a kitchen remodel interact: cabinet boxes, countertop overhangs, wall framing behind the run, venting, and the line of sight from the bay. We manage those intersections as one contract, one schedule, one team.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Belvedere
These are the failures we see repeatedly up here in the 94920 ZIP, where marine air, slope movement, and older framing combine in ways most inland contractors never encounter.
- Door delamination on MDF-core doors. Coastal fog and winter humidity cycling push moisture into the door edges, which lifts the thermofoil layer and leaves the MDF core exposed. In Belvedere that happens faster than inland because the fog stays close to the ridge line. We replace the affected doors with sealed alternatives or match the full run.
- Drawer box separation under overloaded slides. Particleboard drawer boxes swell when humidity gets into the dado joints, and once the box swells, the slide screws lever out of their holes. We see this most in lower base cabinets near the floor, where cooler air sits. Repairs here mean new plywood boxes, not another layer of adhesive.
- Finish cracking at stile-and-rail joints. Hillside homes settle in a slow, seismic rhythm. Door frames twist by millimeters over time, and the paint or finish cracks right at the joint where rail meets stile. Older KraftMaid frames in Belvedere homes are especially prone. We sand, seal, and re-finish before cracks become splits.
- Hinge screw pull-out in older frames. When wind-driven drafts off the bay slam a cabinet door shut a few hundred times a season, the hinge screws start walking out of their holes. Once the hole is stripped, the door sags. We drill and dowel the frame, then remount the OEM hinges.
- Swollen particleboard boxes behind refrigerators or dishwashers. This one is specific to our fog and rain pattern. The gap behind an appliance catches moisture and never fully dries. By the time the owner notices, the box is soft. Replacement with plywood boxes is the honest fix, followed by ventilation work so it doesn’t return.
KraftMaid Service in Belvedere: What Local Conditions Mean for Your Equipment
Belvedere’s design review board requires approval for exterior changes that are visible from the bay, and that includes new kitchen windows and venting. If you’re planning a KraftMaid cabinet run that moves a sink, adds a range hood penetration, or widens a window opening, KraftMaid specialists like us make sure the drawings go through design review before the cabinet order gets finalized. That review timeline adds anywhere from a few weeks to a couple of months to the front end of your project. We build that into the schedule from the first site visit. On a recent hillside remodel off Golden Gate Avenue, we started the design review filing the same week the homeowner signed, which kept the KraftMaid delivery slot aligned with the installation date rather than sitting in a storage locker for six weeks.
There’s also the delivery stretch. On Belvedere’s steeper streets, a full semi won’t clear the switchbacks, and we’ve had to hand-carry boxed cabinet runs from a lower staging point. That means your kitchen schedule has to account for landing a delivery window where the crews, the truck, and the weather all cooperate. We coordinate it.
KraftMaid Models & Products We Service in Belvedere
We install and service the KraftMaid lines most common in Belvedere kitchens: Vantage, Portrait, Momentum, and Sonata. Vantage turns up most often in the mid-century ranches and newer hillside builds. Portrait is the line we see most in full-gut renovations where the client wants a painted door with some profile. Momentum is the budget-conscious line, and Sonata shows up in the older homes that were remodeled in the 2000s.
For parts, we keep a local stock of common KraftMaid hinge plates, slide brackets, and soft-close dampers so we’re not waiting on a shipping manifest for a two-dollar clip. When a line is discontinued, we cross-reference the door profile and match it through the existing line rather than telling you the whole kitchen has to go.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Belvedere
Here’s what our Belvedere clients typically see on written line-item quotes. These are ranges, not bids. The spread depends on cabinet count, door style, box material, and how much existing framing needs to be corrected before we hang anything.
| Service | Typical Belvedere Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Countertop Installation | $2,000 – $6,500 |
Your free estimate includes a site visit, measurements against your existing layout, a check of what’s behind the cabinets, and a line-item quote in writing. Call (844) 384-3361 and we’ll schedule it.
Serving Belvedere, CA — Our Local Coverage Area
We’re based in the Belvedere area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Belvedere
They don’t fail faster, but they fail differently. The coastal fog and winter rain keep the air damp around the clock, and particleboard and MDF both absorb that moisture. What would be a cosmetic concern in a drier inland city becomes separation and swelling up here on the ridge. We’re not saying the brand is flawed. We’re saying the environment tests it harder.
If you’re seeing swelling or peeling, call (844) 384-3361. The estimate is free, and we’ll give you an honest assessment.
Yes, in most cases. Vantage door profiles are still current or cross-referenceable, and we match the existing run by taking a door sample before we order. Where the original finish has aged, we order the closest current finish and adjust on site. If the original boxes are plywood and the current line is particleboard, we upgrade the new boxes to plywood to match the original build quality.
Not for an in-kind cabinet replacement, but yes if the remodel changes windows, adds a vent, or alters an exterior wall opening that’s visible from the bay. Belvedere’s design review process looks at exterior changes, and a kitchen remodel that touches any exterior surface triggers the review. We file the paperwork to keep your schedule moving.
We pre-drive the delivery route before we schedule the truck. On grades where a full semi can’t clear the switchback, we stage at the bottom and bring the run up in smaller loads. That’s factored into the schedule from day one. We’ve done it on Golden Gate Avenue, and we’ll do it on yours.
It depends entirely on the boxes. If the frames are square, the hinges hold, and the boxes haven’t absorbed moisture, refacing gives you a new kitchen look for roughly half the cost of replacement. If the boxes are swollen or delaminated, refacing is putting paper over rot. We’ll tell you which one you actually have.
Call (844) 384-3361 for an exact quote and we’ll inspect the boxes before giving you a number.
Service Areas Near Belvedere
We serve Belvedere and the surrounding Marin communities from the same crew base. That includes KraftMaid service in Sausalito to the south, KraftMaid service in Marin City just below the ridge, and the hills back toward Woodcrest. If you’re anywhere between the bridge and the bay, we’re already working your roads.
Book Your KraftMaid Service in Belvedere Today
We schedule by site visit, not by phone estimate. Call (844) 384-3361 and we’ll get you on the board, do the walkthrough, and put numbers in writing before you commit. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Belvedere since our first hillside kitchen years ago.