Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Bathroom Remodel Cost in Ontario?
A full bathroom remodel in Ontario runs $9,000 to $28,000 for most single-bath projects, with the middle of that range landing near $16,000 for a hall bath with new tile, a vanity, and a tub-to-shower conversion. A small bathroom remodel – think a half bath or a tight 5×8 guest bath – typically lands between $5,000 and $12,000. Where you fall inside those numbers depends mostly on square footage, how far the plumbing moves, and whether you’re choosing Kohler fixtures and Cambria quartz or staying with stock materials.
We’re a licensed general contractor, and we build bathrooms across Ontario and the surrounding Inland Empire. This guide breaks down what each line item really costs in this market in 2026, what pushes a budget up or down, and where homeowners most often overspend.
Key Takeaways
- Typical full remodel: $9,000 to $28,000, with a mid-range hall bath near $16,000.
- Small or half bath: $5,000 to $12,000.
- Biggest cost drivers: moving plumbing, tile scope, and fixture tier.
- Walk-in showers run $4,500 to $12,000; a simpler tub-to-shower conversion runs $3,500 to $10,000.
- Save the most by keeping the toilet and drain locations set and choosing brand-tier flexibility on surfaces and fixtures.
Bathroom Remodel Cost Breakdown (2026)
These are the installed ranges we work from in Ontario for 2026. Labor, materials, haul-away, and permit costs are bundled into each line. Actual quotes vary with the condition of the room behind the walls.
| Line Item | 2026 Ontario Range | Notes |
|---|---|---|
| Full bathroom remodel (mid-range) | $9,000 – $28,000 | Single bath, standard layout, new finishes |
| Small bathroom remodel / half bath | $5,000 – $12,000 | Tight footprint, minimal plumbing changes |
| Walk-in shower installation | $4,500 – $12,000 | Includes waterproofing, tile, drain, glass |
| Tub-to-shower conversion | $3,500 – $10,000 | Tub removal, shower pan, surround |
| Shower replacement | $3,000 – $8,500 | Swap existing shower for new one |
| Bathroom vanity installation | $800 – $3,000 | Vanity, top, sink, faucet, hookup |
Those six lines cover most of what homeowners ask us to price. The spread inside each one comes from three things: how much tile you’re setting, which tier of fixture and surface you choose, and how much hidden work the walls reveal once demo starts. In older Ontario housing stock – the 1950s through 1970s tracts off Euclid and Holt – we routinely find galvanized supply lines or cast-iron drains that need replacing once the wall is open. That’s not a surprise charge; it’s a cost we try to flag before demo, but it’s a real number that has to live in the budget.
What drives the cost up or down
Two bathrooms quoted on the same square footage can land $8,000 apart. The variables are predictable. Moving the toilet, relocating the drain, or shifting the shower to the opposite wall adds plumbing and often a slab or subfloor repair. Tile selection matters more than homeowners expect: a large-format porcelain floor sets faster than a mosaic with a hundred cuts. Fixture tier is the most controllable lever. Kohler, Grohe, and Toto fixtures carry a premium over builder-grade, and they’re worth it where you touch them daily – the shower valve and the faucet – but not necessarily on every piece in the room.
Surface choices swing the budget too. Cambria and Caesarstone quartz vanities cost more than a stock laminate top, but the trade-off is durability and resale. We walk every client through that trade-off in person rather than quoting a single locked-in number, because the honest answer is that the right tier depends on how long you plan to stay in the house.
What Affects Bathroom Remodel Pricing in Ontario
Local conditions shape the number on your quote. Here’s what we see repeatedly across Ontario jobs.
- Age of the plumbing. Ontario has a lot of mid-century housing where the drain lines and supply lines are at or past their service life. If we open a wall and find failing galvanized pipe, replacement gets folded into the project. In a full remodel we plan for this possibility from the start rather than treating it as a change order later.
- Moving fixtures versus keeping them. Keeping the toilet and shower where they are is the single biggest saver. Relocating the toilet to gain floor space is common in small Ontario baths, but it adds a drain move, which adds cost and sometimes concrete work on a slab-on-grade home.
- Tile scope. A floor and tub surround is the baseline. Full-height wall tile, a niche, a bench, and a curbless entry all add labor. Waterproofing behind the tile isn’t optional – it’s the difference between a shower that lasts twenty years and one that fails in five, and we won’t skip it to hit a lower bid.
- Fixture and surface brand tier. This is where brand-tier flexibility pays off. You can choose premium Kohler and Grohe fixtures and Cambria quartz, or cost-conscious alternatives across the same categories, and the difference in the finished room is smaller than the difference in the invoice. We source and install both, so the conversation stays in-house.
- Ventilation and code. Every bathroom needs mechanical exhaust vented to the exterior, and Ontario’s code requires it for good reason – Inland Empire summers push humidity high, and a bath without proper venting breeds mold fast. If a prior DIY added a fan that dumps into the attic, that gets corrected.
- Permits and inspection. A remodel that moves plumbing or electrical generally needs a permit and inspection in Ontario. We pull permits as part of the project; skipping them to save a few hundred dollars is a mistake that surfaces at resale.
How to Save on a Bathroom Remodel in Ontario
You don’t have to spend the top of the range to get a bathroom that holds up. These are the levers we actually recommend, in order of impact.
- Keep the plumbing where it is. Unless the current layout is genuinely broken for daily use, leaving the toilet, shower, and sink drains in place saves the most. Aesthetic changes – new tile, a new vanity, new fixtures – deliver the visual transformation without the drain-move cost.
- Spend on what you touch. Put the budget into the shower valve, the faucet, and the vanity top. Those are the pieces that matter daily and last. Save on decorative trim and accent tile, where the labor is high and the payoff is mostly visual.
- Choose your brand tier deliberately. A Kohler or Grohe shower system costs more than builder-grade, but a mid-tier Kohler valve with a premium-looking trim can read as high-end for less. We guide that trade-off from experience because we carry relationships across the brands.
- Bundle the project. If you’re planning other work – a home update, an exterior refresh, a kitchen – running it under one contract with one schedule spreads the overhead and avoids the coordination cost of hiring separate trades. That’s the core of how we work.
- Get the estimate before demo, not after. The most expensive remodels are the ones scoped loosely. A clear line-item scope and an honest conversation about what the walls might hide keeps the final number close to the quoted number.
- Ask about phased work. If the full budget isn’t there yet, some clients do the shower and floor now and the vanity later. We plan the phases so nothing has to be undone.
Estimates are free, and we’d rather talk through the scope with you in the room than guess over the phone. Call (844) 384-3361 to set one up.
FAQs – Bathroom Remodel Cost in Ontario
How much does a bathroom remodel cost in Ontario, CA?
A full single-bath remodel in Ontario costs $9,000 to $28,000, with a mid-range hall bath landing near $16,000. A small bathroom or half bath runs $5,000 to $12,000. The low end assumes the layout stays put and materials are mid-tier; the high end reflects a layout change, premium tile, and Kohler-tier fixtures. Call (844) 384-3361 for an exact quote – estimates are free.
Is it cheaper to remodel or replace a bathroom?
There’s no “replace” for a bathroom the way there is for a roof – the decision is really remodel versus gut-and-rebuild. A finish-level remodel (tile, vanity, fixtures, no layout change) is the cheaper path, typically $9,000 to $16,000. A full gut that reconfigures the layout and brings old plumbing up to code pushes toward the top of the $28,000 range. If the existing framing and drains are sound, remodeling is almost always the better spend. Call (844) 384-3361 and we’ll tell you which one your room actually calls for.
How much does a walk-in shower cost in Ontario?
A walk-in shower installation in Ontario runs $4,500 to $12,000, including waterproofing, tile, drain, and glass. A tub-to-shower conversion is often the better value at $3,500 to $10,000 because it reuses the existing drain location. The range depends on tile size, whether you go curbless, and glass style. Call (844) 384-3361 for a quote on your specific shower.
How much does a bathroom vanity installation cost?
Vanity installation in Ontario runs $800 to $3,000 for the vanity, countertop, sink, faucet, and hookup. A single-sink stock vanity is at the low end; a double vanity with a Cambria or Silestone quartz top and premium Kohler faucet sits at the top. The install is straightforward when plumbing stays put. Call (844) 384-3361 for an exact figure.
Can you remodel my bathroom the same day or same week?
No – a bathroom remodel is measured in weeks, not days. A typical Ontario bath takes several weeks from demo to final inspection, and we won’t promise a “weekend remodel” that skips waterproofing, venting, or permit inspection to hit a marketing number. What we do promise is one contract, one schedule, and one team accountable for the whole job. Call (844) 384-3361 to scope your timeline realistically.
Why Work With a Single-Source Contractor on a Bathroom
A bathroom looks simple and isn’t. One small room touches plumbing, electrical, ventilation, tile, waterproofing, glass, cabinetry, and finish carpentry. When those trades come from separate contractors, the failures land in the gaps – the tile guy blames the plumber, the plumber blames the framer, and the homeowner is stuck refereeing. Most homeowners don’t realize how many systems interact in a bathroom until something leaks behind a wall.
We carry the whole project under one contract. We source the materials and install them, so the plumbing, the waterproofing, and the tile are one team’s responsibility. Our brand relationships run deep across categories – Kohler, Grohe, and Toto for fixtures, Cambria, Caesarstone, and Silestone for surfaces, KraftMaid and Wellborn for cabinetry – and the same end-to-end general contracting scope that handles a bathroom also handles the exterior of the house, from roofing to siding to pavers. One contractor, every trade. Our Bathroom Remodel in Ontario page lays out how we run the job from first walkthrough to final inspection.
Get a Free Bathroom Remodel Estimate in Ontario
If you’re planning a bathroom remodel in Ontario this year, the most useful next step is an honest, line-item estimate built on your actual room rather than a phone-book range. We’ll walk the space with you, talk through brand-tier trade-offs, and tell you what the walls are likely to reveal before demo starts. One contractor, one schedule, one point of accountability from the first fixture decision to the final walkthrough. Call (844) 384-3361 for a free estimate.
Pricing reflects the Ontario market as of 2026. Workshop Contractors offers free estimates – call (844) 384-3361.
What Our Customers Say
"Ground up build. Permits, foundation, framing, all of it, and he ran the schedule tightly enough that the subs were never tripping over each other. Finished within a month of a fourteen month estimate."
— Alejandro Mendoza"Sent photos of everything before and after, which I needed for our HOA. Didn't have to ask twice."
— Alma Ramirez"Framing crew was meticulous and the walls are straight everywhere. Drywall goes on a lot better when the framing is right."
— Holly Quinn