Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Fontana, CA | Workshop Contractors
We provide independent Ameristar door installation and repair across Fontana’s 92335, 92336, 92337, and 92331 ZIP codes, plus Ameristar in Rialto. What separates our Ameristar work here is scheduling: a lot of Fontana homeowners run rotating shifts at the distribution centers along the I-10 and I-15, so we hang doors and set frames in early-morning windows before the heat, or in quiet second-shift-friendly hours. If you need Ameristar steel entry, storm, or patio door work in Fontana, call (844) 384-3361 for a free estimate.
Why Fontana Residents Choose Us for Ameristar Service
We have been specifying and installing Ameristar steel entry doors, storm doors, and patio doors across Fontana’s mix of mid-century tract homes and newer foothill subdivisions long enough to know exactly how these units fail when the Inland Empire sun bakes them and Cajon Pass wind tests their weatherstripping. Our crew works on Ameristar product every week, and we are an independent contractor with no affiliation to the manufacturer. That matters because we will tell you the truth about whether a repair will hold or a replacement is the better money. Noel Figueroa grew up in the Vineyard neighborhood of Ontario, learned framing and finish work through the construction technology program at Chaffey College, and has spent decades working across the Inland Empire. He is the kind of contractor who will pull a door slab and show you exactly where the rust started, not just quote you a number. For Fontana homeowners, that is the difference between a door that closes clean and one that fights you every time the wind kicks up. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Fontana
- Rusted bottom rails on south-facing steel slabs. Fontana’s summer heat bakes the factory finish until it chalks, and once sprinkler overspray or slab moisture sits against the bottom rail, rust follows. We see it most on older 92335 tract homes where the drainage has never been great and the door sweats against the threshold.
- Racked doors in frames settled on expansive clay. The southern mid-century core of Fontana sits on clay that swells and shrinks with moisture. Frames go out of square, the slab drags at the latch side, and the strike plate gets chewed up. We re-shim, re-square, and replace the sweep and threshold with Ameristar OEM parts so the deadbolt actually throws.
- Wind-driven rain past the weatherstripping. When Santa Ana winds funnel through the Cajon Pass, they push water past the threshold on Ameristar doors that were hung even slightly out of square. You see daylight gaps at the latch edge first. Then the wind whistle starts. Then the puddle at the interior threshold.
- Chalked finishes on west-facing half-lite door slabs. The late-afternoon Fontana sun is brutal on painted steel. We see factory finishes chalk and fade within a few seasons on homes in the 92337 foothill subdivisions, where the western exposure is wide open and there is no shade to cut the UV load.
- Dry, crumbled weatherstripping and sweeps. Fontana’s air is dry and smog-laced, not salty, and it pulls the moisture out of rubber sweeps, kerf weatherstripping, and foam cores. The material shrinks, cracks, and falls out of the kerf groove. The door still looks fine, but dust and wind start coming through the perimeter.
Ameristar Service in Fontana: What Local Conditions Mean for Your Equipment
Fontana’s warehouse and logistics boom along the I-10 and I-15 corridor means a lot of our Ameristar door and exterior work happens on homes whose owners work rotating shifts at distribution centers. That is not a scheduling footnote; it changes how we run jobs here. We schedule installs and door-hanging around early-morning concrete and framing windows before the heat, and we keep second-shift-friendly hours for families who sleep during the day and need quiet work. Last summer we reset an Ameristar half-lite steel entry door on a 1990s tract home in the 92336 foothill subdivisions, where the slab had settled on expansive clay and the door had racked so badly the deadbolt would not throw—a problem we also see doing Ameristar in Glen Avon. We pulled the unit, re-shimmed and squared the jamb, replaced the rusted threshold and sweep with OEM Ameristar parts, and hung a new slab that closed clean against the wind that funnels through the Cajon Pass. That job took one early start and a quiet finish, and the owner was on shift by noon. That is how Ameristar work in Fontana actually gets done.
Ameristar Models & Products We Service in Fontana
Our crew works on Ameristar steel entry door units in half-lite and full-lite configurations, Ameristar storm doors and screen doors, and Ameristar patio and glass slider door units. We also handle hinged and multi-point steel door series. When the frame is sound, we use Ameristar OEM replacement slabs, sweeps, thresholds, and weatherstripping. For high-traffic entries, we spec quality aftermarket hardware: hinges, multi-point locksets, and closers that hold up better than what the factory ships. We keep common OEM Ameristar sweeps and thresholds on the truck for fast Fontana turnaround, but if the unit is more than 15 years old or the slab has rusted through at the bottom rail, we will tell you to replace the door rather than chase a repair that will not hold. For the full picture on Ameristar product, see our Ameristar sales & service page.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Fontana
Door work gets priced per job after we look at the unit, the frame, and the root problem. Here are the project ranges we see across Fontana when Ameristar door work is part of a larger scope. These numbers are line-item ranges, not bid totals.
| Project | Typical Fontana Range |
|---|---|
| Roof Repair | $400 – $1,800 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
What drives the cost on an Ameristar door repair is the frame condition, not the slab. On settled Fontana clay, a racked jamb adds shimming, re-squaring, and often a new threshold and sweep. A free estimate in Fontana gets you a written line-item quote with the door work scoped separately, so you can see what is repair and what is replacement. Call (844) 384-3361 to schedule yours.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and also handle Ameristar repair in Bloomington, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Fontana
Most Ameristar steel doors in Fontana—and the ones we service with Ameristar in Pedley—can be repaired if the frame is still square and the slab has not rusted through at the bottom rail. We replace sweeps, thresholds, weatherstripping, and hardware, and we re-square racked jambs. If the unit is over 15 years old, the frame has settled on clay past the point of shimming, or the bottom rail has open rust, we recommend full replacement. Call (844) 384-3361 and we will tell you which one you are looking at.
Expansive clay soil under Fontana’s older tracts swells and shrinks with moisture, and that movement settles the frame unevenly. The hinge-side jamb drops a fraction, the slab drags, and the latch no longer lines up with the strike plate. We fix it by re-shimming and re-squaring the jamb, then replacing the threshold and sweep with OEM Ameristar parts.
The heat chalks the factory paint on south- and west-facing steel slabs within a few seasons, and it dries out rubber sweeps and kerf weatherstripping until they crumble. Once the perimeter seal fails, wind-blown dust from the Cajon Pass corridor comes in. We replace degraded weatherstripping with fresh OEM material and can recommend a repaint schedule that holds up to Fontana UV exposure. Call (844) 384-3361 for an exact assessment.
Yes, mainly by pushing driven rain past weatherstripping and thresholds on units that were hung even slightly out of square. The first sign is a wind whistle at the latch edge, then daylight gaps, then water at the interior threshold. Storm and patio door units need tighter perimeter sealing in Fontana than they would in a calmer inland market. We check the full weatherstrip run and the threshold on every Fontana service call.
We do. Ameristar steel entry work often runs alongside a full kitchen remodel, a walk-in shower install, or a roof repair, because the door and the envelope affect each other. One contract, one schedule, one crew accountable for how the door frame, the flashing, and the interior work interact. Call (844) 384-3361 to scope the whole project, door included.
Service Areas Near Fontana
We run Ameristar service from Fontana out to Fontana service area neighbors including Loma Linda, Woodcrest, North Tustin, Orange, Buena Park, and Anaheim. Our teams also cover the foothill subdivisions and the 92336/92337 corridors. For the next communities over, see our Ameristar service in Sunnyslope page and our Ameristar service in Corona page.
Book Your Ameristar Service in Fontana Today
Call (844) 384-3361 to schedule your free Ameristar estimate in Fontana. We will come out, look at the door and the frame, and tell you what needs repair and what needs replacement. No pressure, just a straight answer and a written line-item quote.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Fontana and the Inland Empire with independent Ameristar door installation and repair for over 25 years.