Ameristar Construction in San Carlos, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Ameristar Construction in San Carlos, CA | Workshop Contractors

We service, install, and integrate Ameristar cabinetry and countertop lines across San Carlos, from the tract homes east of El Camino Real to the hillside streets climbing west of Alameda de las Pulgas. The thing that separates our Ameristar work here is simple: we’ve seen how San Carlos clay, old fill, and pier-and-grade foundations move under cabinet runs, and we plan for it before the first box gets assembled. We’re not an Ameristar dealer or authorized rep – we’re an independent general contractor who has put their boxes into dozens of Peninsula kitchens and knows where they hold up, and where they don’t. Call (844) 384-3361 for a free estimate on Ameristar cabinetry, countertops, or a full kitchen remodel in San Carlos.

Call (844) 384-3361

Why San Carlos Residents Choose Us for Ameristar Service

Anyone can order Ameristar cabinets from a catalog. Very few contractors in San Carlos have taken them apart after five or ten years of service on a sloped lot and figured out exactly where the corners fail. That’s the difference. We’ve worked Ameristar Kirkland and Sedona-style raised-panel and shaker collections into kitchens where the floor isn’t flat, the humidity swings with the bay fog line, and the afternoon sun hits the west wall hard. Noel Figueroa, our owner and general contractor, learned framing and finish work the old way – on job sites, not in a showroom – and he still walks every San Carlos kitchen job before we order a single cabinet. When you work with us, you get one contractor who understands both the Ameristar product and the foundation it’s sitting on. We also carry Ameristar sales & service knowledge across the full interior remodel scope, so material selection and installation never get handed off to a stranger.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common Ameristar Construction Problems We Solve in San Carlos

  • Doors racked out of square from soil movement. On hillside streets west of Alameda de las Pulgas, expansive clay and old fill keep shifting under the house. An Ameristar cabinet run that was perfectly square at install will start showing uneven reveal gaps as the floor moves. We fix the subfloor and foundation interface first, then reset the boxes so the doors hang true.
  • RTA corner joints loosening from humidity swings. San Carlos sits close enough to the bay fog line that kitchens see seasonal moisture shifts. Ameristar ready-to-assemble boxes assembled with standard fastener schedules tend to loosen at the corners – drawers sag, boxes drift out of square. We re-square, reinforce, and upgrade to quality aftermarket soft-close hardware when the OEM glides are shot.
  • Thermofoil delamination on west-facing kitchens. The hillside homes that catch full afternoon sun off the Santa Cruz foothills put real heat on cabinet door edges. Stocker-grade Ameristar thermofoil finishes and edge banding lift and peel in those conditions. We reface with the right material for the exposure, or step the client to a solid-panel alternative.
  • Swollen toe kicks and end panels from hidden leaks. On pier-and-grade foundations, a slow supply-line leak or hillside drainage issue travels fast – and Ameristar particleboard or thin-skin end panels soak up that moisture before you ever see water on the floor. We trace the moisture source first, then repair or replace the damaged cabinetry so the problem doesn’t come back.
  • Mismatched replacements from discontinued lines. Half of the Ameristar kitchens we touch are partial remodels – new island, same perimeter run. We source OEM doors, drawer fronts, hinges, and touch-up kits while they’re still available, and when the OEM line is gone, we step to aftermarket components that match closely enough that the whole kitchen reads as one install.

Ameristar Service in San Carlos: What Local Conditions Mean for Your Equipment

Here’s the on-the-ground reality most generic cabinet retailers never mention: San Carlos construction volume is dominated by second-story additions, gut remodels, and hillside infill west of Alameda de las Pulgas, not flat-lot new builds. That means an Ameristar kitchen job in this city usually means fitting new cabinet boxes into an existing footprint on a sloped, clay-soil foundation – and if you skip the geotech-informed structural work, your new Ameristar run will fail the same way the old one did. We had a job on a hillside street off Alameda where the previous contractor had refloored over old fill without addressing the movement, similar to challenges we see with Emerald Lake Hills Ameristar service. The 1990s Ameristar raised-panel run had racked so badly the doors wouldn’t close. We corrected the subfloor, shimmed and leveled over the foundation, reset new Ameristar shaker boxes in two broken runs to follow the actual floor line, and topped it with a Cambria quartz island. The doors still hung true through the next winter’s storms. That’s the San Carlos difference: the cabinet is only as good as the floor under it.

Ameristar Models & Products We Service in San Carlos

We spec, install, service, and reface the Ameristar Kirkland and Sedona-style collections – raised-panel and shaker door profiles sold through dealer and retail channels – along with Ameristar RTA all-plywood cabinet boxes and their quartz and granite countertop programs. Where Ameristar OEM hinges, glides, and finish kits are still on the market, we use them so existing doors and drawer fronts match. When the OEM line has been discontinued, we step to quality aftermarket soft-close hardware that fits the box and keeps the run functional. The repair-versus-replace call is always honest: refacing or re-boxing makes sense when the carcasses and floor are sound; if the San Carlos foundation has racked the boxes, we fix the floor first rather than sell you cabinets that will fail the same way. As your General Contractor – San Carlos, we prioritize lasting solutions. We also carry full lines from KraftMaid, Cambria, and Silestone alongside Ameristar, so you get a real material conversation, not a single-brand pitch.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ameristar Service Pricing in San Carlos

Pricing depends on scope, condition of the subfloor, and whether we’re refacing existing Ameristar boxes or starting fresh. Here’s what Ameristar kitchen work in San Carlos typically runs:

Service Typical Range
Kitchen Remodel $14,000 – $45,000
Small Kitchen Remodel $9,000 – $20,000
Cabinet Installation $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500
Kitchen Island Installation $3,000 – $10,000

What drives the number: foundation condition, whether the existing Ameristar boxes can be salvaged, countertop material, and how much structural correction the floor needs. The free estimate includes a walk-through, measurements, and a written line-item scope – no vague allowances. Call (844) 384-3361 to schedule yours. Build it right the first time. The second time costs twice as much and nobody’s happy about it.

Serving San Carlos, CA — Our Local Coverage Area

We’re based in the San Carlos area and know this community well, offering Home Remodeling – San Carlos homeowners can rely on. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ameristar Construction in San Carlos

Service Areas Near San Carlos

We handle Ameristar cabinet and kitchen work throughout the Peninsula and neighboring areas. If you’re in Ameristar service in Redwood Shores, Ameristar service in Belmont, or anywhere across the San Carlos service area, we’ll come out, look at the floor, and give you a straight answer on what the Ameristar run needs.

Book Your Ameristar Service in San Carlos Today

We’re an independent San Carlos general contractor, not a manufacturer rep, and we’ve got Ameristar boxes in kitchens all over the 94070 ZIP. If your doors are racking, your thermofoil is peeling, or you’re planning a full Ameristar kitchen remodel, call (844) 384-3361 today for a free estimate. We’ll walk the floor with you and tell you exactly what’s going on.

Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving San Carlos since day one.

Need Construction help in San Carlos? Licensed & insured · Free in-home estimates response · free estimates
Call (844) 384-3361
Areas We Serve

Request a Free Estimate in San Carlos

Tell us what you need — Workshop Contractors responds fast. No obligation.

By sending this request, you confirm you have read our Privacy Policy and agree to be contacted by telephone, text message, or email about your request, including by the independent professionals who may fulfill it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch