Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Gilroy, CA | Workshop Contractors
We provide independent Belgard hardscape installation and repair across Gilroy, from paver driveways in the 95020 flats to retaining walls on the sloped lots toward the hills. The one thing that makes our Belgard work different here: we plan every paver base, wall footing, and drainage detail around the seismic retrofit work that dominates Gilroy construction, so your hardscape never loads against a freshly braced foundation. If you’re planning Belgard pavers, walls, or slabs in Gilroy, call (844) 384-3361 for a free estimate.
Why Gilroy Residents Choose Us for Belgard Service
We’re a general contractor first, which means we see the whole property, not just the paver line. Noel Figueroa grew up around tradesmen who taught him the difference between work that holds and work that looks good for two seasons, and that’s the standard we bring to every Belgard job in Gilroy. We source Belgard units through authorized distributors and pair them with the right aggregate base, geotextile, and edge restraint for Gilroy’s clay soils and hot, dry summers.
What that means for you: we tell you when a paver is right for your driveway and when concrete makes more sense. We don’t push a single product line because we carry relationships across hardscape brands, so our recommendation tracks what actually holds up on Calaveras-corridor soils, not a dealer program. We’re an independent Belgard sales & service provider, not manufacturer-affiliated, and that independence is exactly why homeowners call us.
Styles & brands we work with







Common Belgard Construction Problems We Solve in Gilroy
Here’s what we see most often on Belgard hardscape in Gilroy, and what actually causes it:
- Settling and rutting on paver driveways. Gilroy’s clay soils expand and contract with winter rain and summer heat. When the aggregate base was compacted thin over that clay, the pavers stay intact but the surface dishes and holds water in low spots. We lift the field, correct the base depth, and re-lay the same pavers when they’re still sound.
- Efflorescence bloom after the first winter rains. Mega-Arbel and Catalina pavers sometimes show white mineral staining after Gilroy’s hot-cure-then-wet cycle. It happens when polymeric sand goes in too early or too hot, before the pavers have fully cured. We clean the bloom and re-sand at the right temperature and moisture window.
- Joint sand washout and paver migration. On patios and walkways with no proper edge restraint, Gilroy’s winter rains push water across the surface and strip the joint sand, then the pavers drift. The fix is edge restraint installed correctly and new sand compacted into the joints.
- Polymeric haze and failed joint fill. On patios set in direct summer sun above 90°F, the sand skins over before it can be compacted into the joints. The surface looks foggy and the joints stay soft. We strip and re-sand, usually in a cooler stretch of a Gilroy morning.
- Retaining wall leaning at the footing. Weston Stone and Norwich walls set without proper drainage behind the wall, or with footings too shallow for Gilroy’s clay, start leaning within a few rainy seasons. We rebuild the footing, add drainage aggregate and weep lines, and re-set the wall.
Belgard Service in Gilroy: What Local Conditions Mean for Your Equipment
Gilroy sits on the Calaveras and San Andreas fault system, and much of its housing stock from the 1990s and 2000s was engineered for seismic code but never actually retrofitted after Loma Prieta changed what we know. That means a lot of Gilroy homeowners are doing foundation bolting and cripple-wall bracing right now, and the hardscape often comes next. The problem: a new paver driveway or retaining wall, if it’s sequenced wrong, can load against a freshly braced foundation, trap moisture at the sill, or direct runoff where the retrofit work just sealed. We handle that by sequencing hardscape after retrofit inspection, grading pavers to shed water away from the bolted sill, and keeping wall footings clear of the foundation line. On an older block near downtown Gilroy, a homeowner was mid-retrofit and wanted a Belgard Catalina Grana driveway and a short Weston Stone seat wall while the retrofit crew was still on site. We staged the driveway base after inspection, graded to shed runoff to the street, and set the wall footing off the foundation line. The pavers came out flat with no ponding, and the retrofit stayed sign-off clean.
Belgard Models & Products We Service in Gilroy
We install and repair every major Belgard line that makes sense for Gilroy’s climate and soil: Mega-Arbel and Mega-Lafitt tumbled pavers for driveways, Catalina Grana and Catalina Slate for patios where that slate texture hides the dust, Urbana Stone and Dimensions slabs for modern layouts, and Weston Stone and Norwich wall units for retaining and seat walls. We buy Belgard units through authorized distributors and pair them with quality base and edge components rather than cheap substitutes, because the failure we see most is base and restraint, not the paver itself. If a field or two of a discontinued Belgard color has cracked or settled, we lift and re-lay matching stock on a corrected base before suggesting a full tear-out.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Gilroy
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives the cost on a Gilroy job: base depth (clay soil needs more aggregate than sand), edge restraint, drainage, and whether any site grading has to be corrected. A free estimate with us includes a site walk, a written line-item quote, and a straight answer on whether Belgard is the right product for your specific yard. Call (844) 384-3361 for an exact quote, estimates are free.
Serving Gilroy, CA — Our Local Coverage Area
We’re based in the Gilroy area and know this community well, including San Martin Belgard service calls. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Gilroy
We can, but we sequence the hardscape after the retrofit inspection so the new paver base and edge restraint never load against a freshly braced foundation or trap water at the sill. On retrofit projects, we coordinate directly with the retrofit crew and stage our work to keep the sign-off clean. Call (844) 384-3361 and we’ll talk through your specific site.
That white staining is efflorescence, mineral salts wicking up through the paver surface. In Gilroy, it’s usually from polymeric sand installed too early or too hot, before the pavers fully cured, then the winter rains drew the minerals out. We clean the bloom and re-sand at the right temperature and moisture window, and it usually stays gone.
They hold up fine when the base is built for clay. Gilroy’s soils expand and contract with moisture, so the base needs more aggregate depth and proper geotextile than you’d use on sandy soil. Most failures we see are base and restraint problems, not the paver itself. We correct the base and re-lay the same pavers when they’re still sound.
Most hardscape projects don’t trigger seismic review on their own, but if you’re already doing foundation retrofit work, the hardscape has to be sequenced and detailed so it doesn’t load against or drain toward the bolted and braced foundation. We handle that coordination as part of our scope, which is why Gilroy homeowners — and those needing Morgan Hill Belgard service — often bring us in for the full property rather than one trade.
A dealer-installed job typically follows a manufacturer program. We’re an independent general contractor, so we specify the paver line, base build, and edge restraint from your site conditions up, and we tell you when Belgard is the wrong call. That independence matters on Gilroy’s clay and seismic lots. We also cover Belgard repair in Aromas. Call (844) 384-3361 for a site-specific recommendation and a free estimate.
Service Areas Near Gilroy
We run Belgard paver and wall work throughout the South Bay and neighboring communities, including Woodcrest, Anaheim, North Tustin, Orange, Loma Linda, and Buena Park. If your project sits just outside the 95020 or 95021 ZIP codes, call us and we’ll let you know if we can get a crew to you. For the full list of what we handle locally, see our Gilroy service area page. We also offer dedicated Belgard service in Las Lomas and Belgard service in Pajaro for homeowners on the edges of our Gilroy coverage.
Book Your Belgard Service in Gilroy Today
If you’re planning a Belgard paver driveway, patio, or retaining wall in Gilroy, call (844) 384-3361. We’ll walk the site, give you a written line-item quote, and tell you straight whether Belgard is the right product for your yard. Estimates are free, and we’ll work around your retrofit schedule if you’ve got one.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Gilroy, Belgard repair in San Juan Bautista, and the surrounding South Bay since 2009. Build it right the first time. The second time costs twice as much and nobody’s happy about it.