Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Highlands-Baywood Park, CA | Workshop Contractors
We provide independent CGI cabinet installation, refacing, and full kitchen remodeling across Highlands-Baywood Park as a Highlands-Baywood Park General Contractor, and the thing that makes our work here different is that we know what San Mateo County permitting and fog-belt humidity do to cabinetry. CGI cabinets are genuinely well-built boxes, but a hillside home in this unincorporated enclave puts them through conditions most cabinets never face. Call (844) 384-3361 for a free estimate on your CGI project.
Why Highlands-Baywood Park Residents Choose Us for CGI Service
We’ve installed and remodeled with CGI cabinetry in San Mateo County’s unincorporated hills long enough to know how their box construction, drawer hardware, and finish lines behave when the fog rolls in every summer morning. Noel Figueroa, our owner, came up through construction technology training that put him on job sites early, and he has spent the years since learning what holds up under a second look. That matters in Highlands-Baywood Park, where many of the custom homes from the 1950s through 1980s still wear their original redwood siding and sit on steep lots that flex through wet winters and dry summers. We are independent, not authorized or warranty-backed by CGI, which means we specify the cabinet that fits your kitchen instead of the one a dealer is pushing. From CGI sales & service to full kitchen remodels, one contract covers the whole job.
Styles & brands we work with
Common CGI Construction Problems We Solve in Highlands-Baywood Park
- Swollen and peeling door faces. Fog-belt humidity cycling swells and delaminates thermofoil and veneer door fronts on CGI cabinets installed against cold exterior hillside walls without a vapor barrier. The back wall of a kitchen set into the slope stays cold, and moisture does what moisture does.
- Sagging soft-close glides and hinges. Older Highlands-Baywood Park homes are rarely plumb. When a cabinet box gets shimmed out of level on out-of-square framing, the soft-close drawer glides and hinges wear out within a few years. We square the carcass first, then reset the hardware to CGI spec.
- Cracked painted door and drawer fronts. Hillside homes expand and contract through wet winters and dry summers. Painted CGI door and drawer fronts crack at the joints and along stile edges, and no amount of touch-up paint hides a joint that is still moving. We address the movement, not just the finish.
- Mildew and particleboard swell behind the boxes. Cabinets set tight to original redwood-siding walls trap moisture, especially under counters near sinks. We see mildew and particleboard swell on backs and bottoms. The fix includes a ventilation gap and a vapor barrier, not just new cabinets.
- Layouts that fight the house. Many original Highlands-Baywood Park kitchens were framed for a different era. We reface and rehang sound CGI carcasses rather than rip them out, and we only recommend full replacement when the box itself has swelled or the layout is working against how you actually cook.
CGI Service in Highlands-Baywood Park: What Local Conditions Mean for Your Equipment
Because Highlands-Baywood Park is unincorporated, every kitchen or bath permit runs through San Mateo County rather than a city building department. That sounds like a technicality until you’re waiting on plan check, because the county’s grading and drainage ordinances mean even a modest addition or wet-wall change can require a geotechnical report and drainage plan before plan check clears. We saw this firsthand on a hillside home off a narrow winding street in Highlands-Baywood Park, where we tore out a 1970s kitchen with CGI cabinet boxes shimmed hard against an exterior wall. The backs were swollen, the soft-close glides were sagging, and the county wanted drainage notes before we could close the walls. We squared and shimmed the new run to plumb, added a vapor barrier and ventilation gap behind the cabinets, reset them with CGI OEM hinges and glides, and set a quartz counter on top. Then we walked the client through the county drainage notes, because in Highlands-Baywood Park the cabinet job is never just a cabinet job. Serving all of Highlands-Baywood Park service area means knowing this process cold.
CGI Models & Products We Service in Highlands-Baywood Park
We work across the full CGI range: Ready-to-Assemble (RTA) all-plywood cabinet boxes, semi-custom painted and stained door styles, soft-close drawer and door hardware packages, and cabinet refacing door and veneer lines. On repairs, including CGI repair in Hillsborough, we use CGI OEM hinges, glides, and touch-up finishes where they are still available so doors and drawers keep matching. We switch to quality aftermarket soft-close hardware only when an OEM part is discontinued. For Highlands-Baywood Park turnaround, we keep common OEM hinges, glides, and touch-up kits stocked locally, which means fewer waiting days for parts that have to come from a distribution warehouse.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Highlands-Baywood Park
What you pay depends on the scope: whether we’re refacing sound boxes, replacing swollen carcasses, or pulling a full kitchen down to studs. Highlands-Baywood Park adds the county permit layer, but the cabinet labor itself is straightforward once the drainage plan is approved. Here is what to expect:
| CGI Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small & Partial Kitchen Remodels | $9,000 – $20,000 |
A free estimate includes a walkthrough, measurements, and a written line-item quote. Call (844) 384-3361 to schedule one, and we’ll tell you exactly where your project falls before any work begins.
Serving Highlands-Baywood Park, CA — Our Local Coverage Area
We’re based in the Highlands-Baywood Park area and know this community well, and we also offer Belmont CGI service. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Highlands-Baywood Park
Yes, if the work touches plumbing, electrical, or a wet wall, San Mateo County requires a permit, and Highlands-Baywood Park’s unincorporated status means that permit runs through county staff, not a city building department. A straightforward cabinet swap on the same footprint may not need a permit, but any sink or appliance move almost always does. Call (844) 384-3361 and we’ll tell you what your specific scope requires during the free estimate.
The wall facing the hill is cold, the fog keeps it damp, and without a vapor barrier behind the cabinet box, that moisture migrates into the thermofoil or veneer door faces and delaminates them. We fix it by adding a vapor barrier and a ventilation gap behind the cabinets, then replacing the damaged doors with matching CGI fronts. For an exact diagnosis and quote, call (844) 384-3361.
Yes, refacing works when the cabinet boxes are sound and the layout still makes sense for how you cook. We rehang with CGI OEM hinges and glides where available, replace the door and drawer fronts with CGI refacing veneer lines, and leave the carcass intact. Full replacement only makes sense when the box itself has swelled or the layout is fighting you. Call (844) 384-3361 to get a refacing-versus-replacement recommendation for your kitchen.
Because Highlands-Baywood Park is unincorporated, San Mateo County’s grading and drainage ordinances apply, and even a modest addition or wet-wall change can trigger a geotechnical report and drainage plan before plan check clears. That adds review time and sometimes engineering cost, but it also protects your hillside home’s foundation. We manage the county submittal as part of the project, so you’re not deciphering plan check notes alone. For a clear timeline on your specific remodel, call (844) 384-3361.
Quartz performs best in the fog-belt humidity because it is non-porous and does not absorb the moisture that granite can pull in on a damp hillside. We source Cambria, Caesarstone, and Silestone quartz, and the right slab depends on your CGI cabinet door style and how much thermal movement your kitchen sees through wet winters and dry summers. We also provide Foster City CGI service. Call (844) 384-3361 and we’ll bring samples that pair well with your specific CGI finish.
Service Areas Near Highlands-Baywood Park
From our base in the Peninsula, we also serve homeowners in CGI service in Half Moon Bay along the coast, CGI service in San Mateo to the east, and surrounding communities like Burlingame, Millbrae, and Pacifica. If you’re in the 94497 ZIP or nearby, we’ll make the drive.
Book Your CGI Service in Highlands-Baywood Park Today
Build it right the first time. The second time costs twice as much and nobody’s happy about it. Call (844) 384-3361 to schedule your free estimate, and we’ll walk your kitchen, listen to what’s not working, and give you a written line-item quote before you commit to anything.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Highlands-Baywood Park and the Peninsula with independent CGI cabinetry installation, refacing, and full kitchen remodels.