Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Francisco, CA | Workshop Contractors
We provide independent CGI in Mission District cabinet and countertop installation, repair, and full-kitchen remodeling across San Francisco, from the Richmond to Bayview. What sets our CGI work apart here is that we sequence every job around the city’s soft-story retrofit deadlines and fog-belt moisture realities, not just the cabinet spec sheet. If you’re planning a kitchen in a pre-1906 Edwardian or a hillside home in Noe Valley, call (844) 384-3361 for a free estimate. We know how CGI products behave in San Francisco’s older, damp, lot-line-to-lot-line buildings because we’re in them every week.
Why San Francisco Residents Choose Us for CGI Service
Noel Figueroa runs our San Francisco CGI work the way he learned to build: one contract, one team, and nobody pointing fingers when the cabinet run meets an out-of-plumb wall. He grew up around tradesmen in Ontario, California, where he got his first framing hammer before he could rent a truck, and he’s carried that same standard into every Victorian row house and hillside Edwardian we’ve opened up since.
We’re not a CGI dealer pushing a catalog. We’re a San Francisco General Contractor that installs and troubleshoots CGI products in real San Francisco buildings, which means we see the failure modes that showrooms never mention. We source genuine CGI door panels, hinges, and drawer slides for color-matched repairs, and we use tested third-party soft-close and leveling hardware only where it outperforms the original. When a carcass is sound, we repair it. When moisture-swollen board or a worn runner system means replacement is the cheaper long-term move, we say so plainly.
Most San Francisco homeowners don’t realize how many systems interact in a kitchen renovation: the retrofit shear wall, the settling foundation, the fog-driven condensation against uninsulated exterior walls, and the cabinet run that has to stay level across all of it. That’s the work we do. CGI sales & service is part of our broader cabinetry and surfacing capability, and we handle it as one integrated job, not a series of disconnected trades.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Francisco
- Moisture-swollen MDF-core boxes in fog-belt kitchens. San Francisco’s marine layer keeps exterior walls damp for months at a time. When a CGI frameless MDF-core cabinet sits against an uninsulated exterior wall, condensation forms behind the box, the core wicks moisture, door panels swell, and hinges pull loose. We fix the cabinet and the underlying insulation and vapor-barrier condition, because replacing the box without fixing the wall just means another failure in two wet seasons.
- Full-overlay doors rubbing on out-of-plumb Victorian walls. In a lot of San Francisco’s 1880s-to-1930s row houses, the walls haven’t been square since the Loma Prieta quake. CGI’s full-overlay doors ride tight and rub against the frame when the wall leans even a few degrees. Standard flat-pack install won’t solve that. We scribe and shim every door against the actual wall, not the blueprint.
- Quartz stress cracks at sink cutouts on hillside homes. In neighborhoods like Noe Valley and Bernal Heights, settling foundations put stress on CGI quartz counters. When the sub-top isn’t leveled or the cabinet run can’t flex, the stone cracks at the sink cutout and seam. We level the run first, then set the tops.
- Shaker door joinery separating after humidity swings. Unheated rear additions and basement kitchens in fog-exposed parts of San Francisco go through big humidity swings between the wet winter and the dry late-summer Santa Ana-like days. That cycle separates shaker joinery and lifts finish film on CGI doors. We re-glue and refinish where the door is sound, and replace where it’s not.
- Cabinet runs out of level after soft-story retrofits. When a San Francisco building gets new shear walls under Ordinance 66-15, the floor may shift as much as an inch. Any cabinet run installed before that shift ends up out of level, and the counters crack at the seams. We sequence cabinet installation after the retrofit’s new shear walls and leveling, not before.
CGI Service in San Francisco: What Local Conditions Mean for Your Equipment
San Francisco’s mandatory soft-story retrofit under Ordinance 66-15 is the single biggest factor most CGI installations in the 94107 through 94110 flatlands never account for. Here’s the reality: many CGI kitchen and cabinet jobs in those ZIP codes happen alongside or right after a foundation and shear-wall upgrade. If the cabinets go in before the retrofit, the new shear walls move the floor, the cabinet run goes out of level, and the quartz counters crack at the seams. We sequence the work the other way: retrofit first, level the run, then install the cabinets and set the stone. It adds a step, but it’s the difference between a kitchen that stays square for twenty years and one that needs a re-level in three. This is the specific condition a generic CGI page never mentions, because it only exists in San Francisco’s retrofit-mandated housing stock.
CGI Models & Products We Service in San Francisco
We work on the full CGI line that shows up in Bay Area kitchens: Euro-style frameless full-overlay cabinets, shaker and slab door collections, the quartz and granite countertop program, and both all-plywood and MDF-core cabinet boxes. For repairs, we source genuine CGI doors, hinges, and drawer slides so the color and hardware match the original run. For replacement hardware where the original underperforms, we stock tested third-party soft-close and leveling options locally so San Francisco turnaround doesn’t wait on a freight truck. If a box is sound, we repair it. If it’s moisture-swollen or the runner system is shot, we’ll tell you replacement is the cheaper long-term move and quote the job accordingly.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Francisco
What you pay for CGI work in San Francisco depends on the condition of the room behind the cabinets, not just the cabinet order. Here’s the range for the work we do most often:
| Service | Price Range |
|---|---|
| Full Kitchen Remodel | $16,520 – $53,100 |
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
A free estimate with us means we come out, look at the walls, the floor, and the retrofit status, and give you a written line-item quote. Call (844) 384-3361 to schedule yours.
Serving San Francisco, CA — Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Francisco
No. We’re an independent general contractor that installs, repairs, and remodels with CGI products. That independence means our recommendations come from field experience in San Francisco’s housing stock, not from a manufacturer relationship or a sales quota.
They can, if the cabinet run isn’t leveled and the sub-top isn’t prepped before the stone goes down. Hillside homes in Noe Valley and Bernal Heights put stress on quartz at sink cutouts and seams. We level the run and check the foundation condition before we set any countertop. Call (844) 384-3361 and we’ll assess your specific kitchen before you order stone.
Yes. We source genuine CGI door panels, hinges, and drawer slides so repairs match the original color and hardware. For soft-close and leveling hardware, we stock tested third-party options that outperform the original, and we’ll tell you which we’re using and why.
For a standard kitchen without retrofit work, cabinet installation typically runs two to five working days. If the job needs scribing against out-of-plumb walls, leveling over a settling floor, or sequencing after a soft-story retrofit, it takes longer. We’ll give you a written schedule before we start.
Euro-style frameless full-overlay, shaker and slab door collections, quartz and granite countertop programs, and both all-plywood and MDF-core cabinet boxes. If it’s a CGI product in a San Francisco kitchen, we’ve likely worked on it.
Service Areas Near San Francisco
We run CGI installation and repair jobs across San Francisco service area including the 94127, 94128, 94129, and 94130 ZIPs. We also take on CGI work in CGI service in Chinatown and across the Bay in CGI service in Tiburon. If you’re planning a kitchen remodel anywhere in the city or just across the span, call us.
Book Your CGI Service in San Francisco Today
If your CGI cabinets are swelling, your doors are rubbing, or you’re planning a full kitchen remodel in San Francisco, call (844) 384-3361. We’ll come out, look at what you’ve got, and give you a free written estimate.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving San Francisco since 2016.