Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Juan Bautista, CA | Workshop Contractors
We install, reface, and repair CGI cabinetry across San Juan Bautista as a San Juan Bautista General Contractor, not an authorized dealer. What makes our CGI work different here comes down to one thing: half the homes in this town sit inside a state historic district, and kitchen or bath work near the plaza routinely runs into preservation review that a contractor in Hollister never sees. We plan CGI layouts around the existing shell instead of reconfiguring it. Call Noel Figueroa at (844) 384-3361 to talk through your project.
Why San Juan Bautista Residents Choose Us for CGI Service
We have been setting CGI cabinet boxes in San Benito County homes long enough to know how the factory finishes actually behave in this climate. Thermofoil doors peel here. Drawer slides bind in winter. The old adobe and brick shells around the historic core add a layer of complication that a generic cabinet installer never accounts for. Our team handles CGI sales & service from the first measurement to the final hinge adjustment, and we keep genuine CGI doors, drawer fronts, hinges, and slides on hand for the common repairs.
Noel Figueroa grew up around tradesmen who framed houses by hand, and he learned early that square framing and level subrails are the difference between a cabinet job that lasts and one that fights you from day one. He carries that same standard into every San Juan Bautista service area job we take on. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Juan Bautista
CGI makes a solid cabinet, but this town’s humidity swings and older housing stock create specific failure points we see again and again. Here are the five most common:
- Thermofoil delamination on door skins. San Juan Bautista runs wet in winter and bone dry in summer. Older homes without consistent climate control put CGI thermofoil and laminate doors through a punishing cycle, and the skins lift at the edges first. We replace affected doors or reface the full run when the peeling is widespread.
- MDF and particleboard swelling at sink bases. In the adobe and brick-wall homes near the historic core, slow plumbing seep and seasonal moisture wicking go unnoticed for years. The toe kicks and sink bases on CGI boxes swell, crumble, and eventually lose structural integrity. We replace damaged boxes and rebuild the vulnerable areas with moisture-resistant materials where it makes sense.
- Hinge and drawer slide sag in older homes. Mid-century houses on the outskirts have had CGI cabinetry in service for decades. European concealed hinges wear, drawer slides lose their tension, and doors start rubbing. In most cases, we replace the hardware with genuine CGI parts or quality Blum-style aftermarket slides and the cabinets tighten right up.
- Chipped edge banding at high-touch corners. Base cabinet edges take abuse. Factory edge banding on CGI doors chips and peels at the corners that get bumped by drawers, brooms, and knees. Small edge damage can be repaired; full-face replacement is the call when the banding is lifting across multiple doors.
- Discontinued door styles during partial remodels. You decide to add a cabinet run or replace a damaged door, and the CGI style is no longer produced. Matching a discontinued finish and profile is nearly impossible. We tell you straight whether a full door replacement is the only clean option, and we price it before any work starts.
CGI Service in San Juan Bautista: What Local Conditions Mean for Your Cabinets
Most of San Juan Bautista’s core sits inside the San Juan Bautista State Historic Park and adjacent historic zoning, which means a kitchen remodel that touches exterior openings or visible finishes near the plaza can trigger historic-preservation review. That review process cares about the shell: window openings, wall planes, exterior materials. It does not care what’s inside your cabinets. So the smart move in this town is to leave the shell alone and design the CGI cabinet layout around it. We plan cabinet runs, countertop overhangs, and venting paths that respect the existing wall openings instead of reconfiguring them. That single decision keeps a kitchen remodel out of design-review limbo and on a normal construction schedule. It also preserves the adobe and unreinforced-masonry walls that make these buildings what they are. In our experience, the projects that stall in San Juan Bautista are the ones that start cutting new openings into old walls. The ones that stay moving are the ones that treat the existing shell as a fixed constraint and work inside it.
CGI Models & Products We Service in San Juan Bautista
We work on the full CGI cabinet range: Ready-to-Assemble all-plywood lines, Euro-style frameless cabinetry, Shaker and raised-panel door styles, and vanity and bath cabinet collections. When a line is still supported, we order genuine CGI replacement doors, drawer fronts, and hardware. When it is not, we specify quality aftermarket Blum-style hinges and slides that perform as well or better than the originals. No reason to scrap a sound cabinet box over a six-dollar hinge. But if the boxes are swollen, moldy, or out of square, refacing will not hold, and replacement is the honest call. We stock common CGI hardware locally so fast turnaround for San Juan Bautista repairs does not depend on a cross-country shipment.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Juan Bautista
Every job is priced from the actual condition of your cabinets and the scope of the room, not from a flat rate card. Here is what our CGI work typically runs in the San Juan Bautista market:
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
The spread exists because a full kitchen remodel on a ranch-parcel home with a large footprint costs more than a small kitchen refresh in a bungalow near the plaza. Countertop material, cabinet line, and whether we are refacing or replacing all move the number. A free estimate gets you a written line-item scope with no obligation. Call (844) 384-3361 to schedule one.
Serving San Juan Bautista, CA — Our Local Coverage Area
We’re based in the San Juan Bautista area and also offer CGI service in Gilroy and nearby communities. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Juan Bautista
Yes, in the large majority of cases. If the project stays inside the existing wall openings and does not alter exterior finishes, windows, or the roofline, it rarely requires preservation review. We design CGI cabinet layouts around the existing shell for exactly this reason. Call (844) 384-3361 and we will walk the site before you commit to a plan.
If the peeling is limited to one or two doors and the underlying MDF is dry and intact, refacing those doors is a fraction of the cost of a full replacement. If the delamination is widespread across multiple doors or the core material has started to swell, replacement makes more sense long-term. We will show you the condition and price both options so you can decide on facts, not guesswork.
San Juan Bautista winter moisture raises the humidity inside bathrooms, especially in older homes without exhaust fans. The MDF drawer boxes and wood slides absorb that moisture and swell, which makes drawers bind. We fix this by adjusting or replacing the slides and adding moisture-resistant materials where needed. Phone (844) 384-3361 for an exact diagnosis.
They hold up well when the home has consistent climate control and the installation is level and square from the start. Ranch-parcel homes in the San Benito Valley see big swings between night and day, but the cabinets most often fail because of installation shortcuts or undetected moisture, not the temperature itself. We shim and level every run before the boxes go in.
Matching a discontinued CGI door style is rarely possible, because the exact finish, profile, and edge banding are no longer produced. When you need a partial remodel, we will show you what replacement options exist and price a full door replacement if that is the cleaner path. Call (844) 384-3361 to have us look at the existing doors in person.
Service Areas Near San Juan Bautista
From our San Benito County base, we also serve homeowners in nearby communities, including Woodcrest, Anaheim, North Tustin, Orange, and Loma Linda. If you are just outside San Juan Bautista, we bring the same independent CGI expertise to your project. See our CGI service in Prunedale and CGI service in Castroville pages for coverage details in those areas.
Book Your CGI Service in San Juan Bautista Today
We view every San Juan Bautista CGI project against the realities of this town: historic shells, adobe walls, and humidity that punishes shortcuts. Call Noel Figueroa at (844) 384-3361 for a free estimate. We will look at your cabinets, tell you what actually needs to happen, and price it in writing.
Written by Noel Figueroa, Owner at Workshop Contractors, serving San Juan Bautista and San Benito County with independent CGI cabinetry service and full-scope remodeling.