Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Soquel, CA | Workshop Contractors
We install, reface, and repair CGI cabinetry and countertop systems across Soquel, and we’re independent – not a dealer, not factory-authorized. The thing that makes our CGI work different here is that we know what happens when these products go into the pier-and-post cottages and creek-adjacent homes that make up so much of Soquel’s housing stock. If you’re planning a kitchen or bath remodel with CGI materials, call (844) 384-3361 and we’ll talk through what your foundation, your crawlspace, and your floor framing actually mean for the job.
Why Soquel Residents Choose Us for CGI Service
We’ve spent years working on and around CGI products in Soquel’s older homes, and that hands-on time in real houses teaches you things a catalog never will. Noel Figueroa, our owner and general contractor, learned framing and finish work the old way – job sites before he was old enough to rent a truck, then decades across California building and remodeling. That background matters when a CGI cabinet run has to sit level on a floor that hasn’t been flat since the McKinley administration. We use OEM CGI hardware and components where they’re still available, and we spec quality aftermarket glides, hinges, and drawer boxes when the OEM line is discontinued. Matching the existing box is often the honest call, and we tell you when it isn’t. For Soquel homeowners, that means one crew that handles the cabinet set, the countertop, the subfloor, and the permit conversation – without you coordinating three different trades.
Styles & brands we work with
Common CGI Construction Problems We Solve in Soquel
- Swollen and delaminated cabinet boxes near the creek. Particleboard and MDF box construction in CGI cabinetry absorbs moisture when Soquel’s wet-winter humidity and creek-adjacent crawlspaces push vapor up through the floor. We see it most in lower cabinets and vanities on pier-and-post foundations – the boxes swell at the base, doors stop closing, and the whole run has to come out. The fix is replacement with moisture-rated materials, plus dealing with the vapor source underneath.
- Sagging drawers and worn hinges on builder-grade CGI packages. After a decade of daily use, the drawer glides and hinges on entry-level CGI cabinet lines wear out at the box rails and start to sag. Most of the time the cabinet boxes themselves are fine – the repair is new hardware and re-blocking the rails, which costs far less than a new cabinet run and gets everything closing square again.
- Countertop seams that flex and fail. When the subfloor or cabinet run flexes – and in 1870s – 1920s Village structures, the floor framing is rarely flat – CGI quartz and laminate tops crack or separate at the seams. Leveling the cabinet run and re-supporting the floor is part of the job before the new top goes down, otherwise you’re just setting the same failure in stone, literally.
- Blistered and peeling finishes in undersized bathrooms. Soquel cottages with original single-pane windows and no exhaust fan put a lot of humidity into small bath spaces. CGI vanity and cabinet finishes blister near the shower and tub zones when ventilation can’t keep up. We fix the cabinet and we talk you through the ventilation upgrade that stops it from happening again.
- Kitchen islands set on uneven pier-and-post floors. A CGI island with a quartz top is heavy, and if the floor under it has settled or sagged, the top will crack at the joint within a year or two. We re-support, re-flatten, and then set the island so the stone actually holds.
CGI Service in Soquel: What Local Conditions Mean for Your Equipment
Old Soquel Village storefronts and cottages sit on shallow pier foundations over former creek channels. When our crew opens a floor for a CGI kitchen or bath remodel, what we find underneath is rarely what the plans assume – old-growth redwood beams, soft soil, sometimes active spring flow moving through the crawlspace. That stops the job until Santa Cruz County geotechnical review clears it, and no countertop or cabinet brand changes that reality. What it means for CGI owners specifically is this: your cabinet boxes and stone tops are only as stable as the framing they sit on, and in the Village, that framing is often 100 years old and sitting in seasonal water. We plan for it. On a cottage just off Old Soquel Village’s main street, our crew opened the floor for a CGI kitchen cabinet and island install and found the original redwood piers sitting in active spring flow under the former creek channel. We paused the cabinet set, brought in county geotechnical review, sistered and re-supported the framing, then re-flattened the subfloor before setting the CGI quartz island so the seams wouldn’t flex. The homeowner got a level, dry kitchen floor and a countertop run that won’t crack at the joint. That’s not a manufacturing problem – it’s a Soquel foundation problem that shows up as a CGI failure if the contractor doesn’t catch it first.
CGI Models & Products We Service in Soquel
We work on the CGI ready-to-assemble and pre-finished kitchen cabinetry lines sold through regional building suppliers, along with the CGI quartz and granite countertop programs spec’d for kitchen and bath remodels. That covers full cabinet runs, bath vanity packages, partial cabinet refacing with CGI door and drawer component lines, and replacing worn hardware on existing boxes. When we need OEM parts for a CGI line that’s still current, we source them directly; when a line has been discontinued, we spec quality aftermarket glides, hinges, and drawer boxes that match the existing box profile. If faster-movers – glides, hinges, bumpers, toe-kick trim – are needed, we keep common hardware on hand so Soquel jobs don’t stall waiting on a shipment. For broader CGI sales and product questions across all our markets, see our CGI sales & service coverage.
CGI Service Pricing in Soquel
CGI cabinet and countertop work in Soquel falls into predictable ranges depending on scope. A small cabinet install runs less than a full kitchen gut; a quartz island set adds cost over a standard vanity swap. Here’s what we see across our Soquel jobs:
| Project | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Backsplash Installation | $800 – $2,500 |
What drives the cost in Soquel isn’t usually the cabinet line – it’s what we find under the floor. Foundation work, geotechnical review, drainage correction, and subfloor re-flattening add scope before the first cabinet box gets set. When we quote a free estimate, we walk the crawlspace if we can and we tell you what we see. Call (844) 384-3361 and we’ll give you a written, line-item number for your specific house – not a range from a website.
See the difference
Before
After
Before
After
Before
AfterKey Takeaways
- We’re an independent CGI service provider in Soquel – no manufacturer affiliation, no badge, just years of install and repair experience in coastal Santa Cruz County homes.
- Soquel’s pier-foundation Village homes and creek-adjacent lots create moisture and leveling problems that damage CGI cabinetry and countertops if not addressed first.
- We carry common CGI hardware for fast turnaround and source OEM parts when available, aftermarket when a line is discontinued.
- Free estimates include a crawlspace and floor-leveling assessment – because that’s what actually determines whether your CGI countertop cracks.
- Call (844) 384-3361 to schedule your Soquel-specific estimate.
Serving Soquel, CA — Our Local Coverage Area
We’re based in the Soquel area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Soquel
Yes, and we’ve done it many times. The key is that the pier foundation has to be evaluated and the subfloor re-flattened before the cabinet run goes in, because any flex in the floor becomes a cracked countertop seam or a cabinet door that won’t close. We handle the foundation assessment, the county geotechnical review if it’s triggered, and the cabinet install as one job. Call (844) 384-3361 if your Village cottage is the one we’re talking about.
It depends on the scope, but in many cases yes – unincorporated Soquel falls under Santa Cruz County permitting, not the City of Santa Cruz, and structural work or moving plumbing and electrical triggers county review. We pull the permits, schedule the inspections, and handle the county geotechnical review when foundation work is involved. You shouldn’t have to become a permitting expert to get new cabinets.
CGI quartz holds up fine as a material – the question is the floor under it. Creek-adjacent Soquel homes often have crawlspace moisture and historical settling, and a quartz top set on an unleveled cabinet run will crack at the seam. We re-support and re-flatten the cabinet base before the stone goes down, and we address the moisture so the cabinet boxes don’t swell underneath. Call (844) 384-3361 for an exact assessment of your creek-side kitchen.
If the blistering is on the door and drawer fronts, refinishing or replacing the fronts is usually the fix. If the box itself is swollen or delaminated, replacement is the honest call – surface repair won’t hold in a humid bathroom. The deeper issue is almost always ventilation, so we’ll assess the exhaust situation and size a fan that moves enough air for the space. Call (844) 384-3361 and we’ll tell you which path your vanity actually needs.
They can, but mostly on the exterior side – fire-resistant roofing, defensible-space clearing, and exterior material ratings. An interior CGI kitchen or bath remodel rarely triggers wildfire-code requirements unless the remodel includes a roof replacement, new exterior walls, or an addition. We stay current on Santa Cruz County’s WUI code requirements and we’ll tell you upfront if your remodel crosses into scope that does.
Service Areas Near Soquel
In addition to Soquel, we provide CGI cabinet and countertop service across the Santa Cruz area and into nearby markets. Our local coverage includes Soquel service area neighborhoods and extends to neighboring communities like Woodcrest, North Tustin, Orange, Loma Linda, and Buena Park. For CGI work specifically on the coast side, see CGI service in Live Oak or CGI service in Twin Lakes.
Book Your CGI Service in Soquel Today
If your Soquel home needs CGI cabinets set, refaced, repaired, or replaced – and the floor under them is anything less than solid – call us at (844) 384-3361 to schedule your free estimate. We’ll walk the crawlspace, look at the framing, and give you a written quote that accounts for the real conditions of your house. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Soquel and the surrounding Santa Cruz County area.