Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in South San Francisco, CA | Workshop Contractors
We install, reface, and repair CGI cabinetry across South San Francisco’s older cottages, converted garages, and east-side commercial build-outs. The one thing that changes how we approach CGI work here is the fog. Persistent marine-layer humidity means thermofoil door skins and particleboard boxes fail differently in South San Francisco than they do ten miles inland, and we plan every install around that. Call (844) 384-3361 for a free estimate on cabinet installation, refacing, or a partial kitchen remodel.
Why South San Francisco Residents Choose Us for CGI Service
We carry the full CGI sales & service knowledge needed for this product line, from ready-to-assemble Shaker boxes to Euro-style slab door runs. Noel Figueroa grew up around tradesmen who taught him that framing that is square and trim that meets the corner matter more than anything you can put in a brochure. That lens shapes how we look at cabinet work: a CGI box that has swelled at the sink base is not a lost cause if the rest of the run is sound, and we will tell you that instead of selling you a full tear-out.
We have worked the South San Francisco service area long enough to know which Old Town lots need street-staging permits for deliveries and which Avalon kitchens trap moisture against the exterior wall because the original venting never kept up with the fog. We are an independent contractor, not a CGI dealer or authorized service center. That independence means we quote the repair that will actually hold up in a fog-belt kitchen before we recommend replacement.
Styles & brands we work with
Common CGI Construction Problems We Solve in South San Francisco
- Thermofoil door skins peeling at the edges. CGI thermofoil doors delaminate when heat and moisture work at the adhesive seam, and South San Francisco kitchens stay damp for months at a stretch. We see the worst peeling on sink-wall cabinets and over ranges where steam rises into the door edges, especially in the 1940s stucco cottages around Old Town and Avalon.
- Swollen particleboard boxes at the sink base. A slow supply-line drip or a fog-season condensation streak runs down the cabinet side, and the MDF or particleboard soaks it up like a sponge. The box crumbles at the bottom corners around the sink cabinet first. By the time homeowners notice, the box usually needs replacement, not patching.
- Drawer glides and hinges that have seized or sagged. Older CGI hardware wears out long before the cabinet box fails. We replace worn glides and hinges with matched or quality aftermarket parts so drawers stop binding and doors stop sagging, and we do it without telling you to replace the whole run.
- Shaker door rails and stiles separating at the joints. The constant moisture cycling in South San Francisco’s fog belt swells and contracts door frames. Doors that face west-side kitchen windows catch the marine layer’s condensation pattern and start showing separation at the rail-to-stile joint, sometimes with finish crazing along the seam.
- Melamine and prefinished plywood boxes degrading in converted garages. South San Francisco has a lot of converted garage spaces, and those rooms were rarely insulated or vented for kitchen use. CGI melamine boxes hold up worse in those damp, unconditioned spaces than in the main house, and we plan replacement accordingly.
CGI Service in South San Francisco: What Local Conditions Mean for Your Equipment
Here is something that shapes CGI in San Bruno and South San Francisco work more than people expect: the residential lots in Old Town and Avalon are so tight that a dumpster or a cabinet-delivery truck physically cannot stage on the property. We schedule CGI cabinet and countertop deliveries around street-staging permits and the rain windows, because assuming a driveway drop is how you end up with a delivery truck idling on a narrow street while a neighbor calls the city. The Caltrain corridor and Highway 101 split the city, which means a cabinet run headed to a job west of 101 may sit in airport-adjacent traffic near SFO. None of that is a problem if it is planned for, and it is exactly the kind of thing a contractor who only works the flat inland grid never thinks about.
CGI Models & Products We Service in South San Francisco
We work on the full CGI residential and light-commercial cabinet range: ready-to-assemble Shaker-style kitchen cabinets, the Euro-style flat-panel slab door line, thermofoil finished doors and drawer fronts, and prefinished plywood and melamine cabinet boxes. For CGI repair in Daly City and nearby, we match hinges, glides, and door-front replacements to the original CGI series where the box is still sound, and we move to quality aftermarket hardware when OEM parts are discontinued. For installs, we keep the most common hardware and matching door-front profiles stocked locally so a South San Francisco job does not stall waiting on a parts order from out of state.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in South San Francisco
Cabinet and kitchen work in South San Francisco falls into predictable ranges, though every Broadmoor CGI service job shifts based on box condition, door-front choice, and how much of the original run can be saved. Here is what we typically see in this market:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Full Kitchen Remodeling | $16,520 – $53,100 |
What drives the number: whether boxes can be refaced or need replacing, whether the countertop has to come off to reset the sink base, and whether street-staging permits add a line item. Your free estimate includes a written line-item scope so you can see exactly where the money goes. Call (844) 384-3361 to schedule yours.
Serving South San Francisco, CA — Our Local Coverage Area
We’re a South San Francisco General Contractor based in this area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in South San Francisco
Yes, where the boxes are still square and dry. We reface sound CGI boxes with new Shaker or flat-slab door fronts, matched hinges, and veneer or thermofoil panels, which costs meaningfully less than a full tear-out. If the boxes have swelled at the sink base or the door skins are peeling across more than a few units, replacement usually costs less over ten years. Call (844) 384-3361 and we will tell you which path makes sense after looking at the run.
The thermofoil skin is delaminating from the door substrate, and in South San Francisco the usual driver is fog-belt humidity plus kitchen moisture. The adhesive bond fails first at the bottom and side edges of doors near the sink, range, or a condensation-catching west-side window. Peeling across a door or two can sometimes be refaced; peeling across most of the run means replacement is the honest call.
In much of Old Town, Avalon, and the tight-lot grid west of Highway 101, yes. If the truck or dumpster cannot fit on the property, the city requires a street-staging permit. We handle that paperwork as part of the job and schedule deliveries around permit windows and rain, so you do not have to chase the building department yourself.
Moisture is the variable. Adhesives, caulk, and paint all cure slower in South San Francisco’s cool, damp marine layer than they do inland, and we build that curing time into the schedule. We also avoid setting cabinet boxes against a wall that is still holding fog-season moisture, because that is how a brand-new install starts swelling six months later. The timeline is not longer; it is sequenced differently.
Yes. South San Francisco is the Industrial City, and a lot of the east-side lab and office build-outs need kitchen and break-room cabinetry that holds up under heavy daily use. CGI’s commercial-style Euro and Shaker lines work well in those spaces, and we install them to the same standard we would in a residential kitchen. Call (844) 384-3361 with the project scope and we will quote it.
Service Areas Near South San Francisco
We handle CGI cabinet and kitchen work throughout the South San Francisco area, including Woodcrest, Brisbane, Pacifica, Daly City, and the residential pockets off Grand Avenue and Airport Boulevard. If you are a short drive north or south of 101, we can usually reach you the same week. We also provide CGI service in Brisbane and CGI service in Pacifica for neighbors closer to the coast.
Book Your CGI Service in South San Francisco Today
If your CGI cabinets are peeling, swelling, or just tired, call (844) 384-3361 to schedule a free estimate. We will look at the run, tell you whether refacing or replacement makes sense, and give you a written line-item quote. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner at Workshop Contractors, serving South San Francisco and the surrounding area.