Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Stanford, CA | Workshop Contractors
We provide independent CGI service across Stanford, from cabinet refacing and door-and-drawer replacement to full kitchen remodels around Escondido Village and the faculty housing near the Olmsted-era quad. The one thing that makes our CGI work here different: we know Stanford projects clear University planning and design review before the County even issues a building permit, so we lock cabinet elevations and specs early and avoid rework later. Call (844) 384-3361 for a free estimate.
Why Stanford Residents Choose Us for CGI Service
We have opened up CGI boxes and panel fronts across Stanford housing stock, and we know where this product line’s real weaknesses sit—whether it’s a Palo Alto CGI service call or a campus job. The thermofoil edge wrap on a CGI shaker door fails differently in a dry-summer, wet-winter climate than it does inland. The particleboard base cabinets under a mid-century faculty kitchen behave differently when winter rains push moisture through aging slab plumbing. Noel Figueroa, our owner and general contractor, grew up watching tradesmen frame houses and learned early that a cabinet is only as good as the wall behind it and the box holding it together. We diagnose the actual failure, not just the visible symptom. And because we’re local to Stanford, we understand the scheduling reality: campus review timelines mean your cabinet work gets planned months ahead, not days.
Styles & brands we work with
Common CGI Construction Problems We Solve in Stanford
- Thermofoil and melamine edge wrap peeling along box edges. Stanford’s dry-summer, humid-winter swing makes the edge banding expand and contract, especially in kitchens where the sink sits close to a cabinet run. We re-bond where the substrate is sound or replace the door and drawer fronts when the wrap has lifted past saving.
- Particleboard and MDF boxes swelling and crumbling at the base. In mid-century faculty and graduate housing, winter rains push moisture through slab vapor or aged plumbing, and the bottom of a CGI sink cabinet is usually the first thing to go. If the box has taken water, we rebuild it with a moisture-resistant base and re-hang the doors rather than hiding the damage under new fronts.
- Painted and stained face frames fading and crazing. West- and south-facing units in Stanford get direct late-summer sun, and wildfire-smoke-season UV exposure accelerates finish degradation. We match existing CGI finishes or reface the run when the fading is too far gone for touch-up.
- Hinges and slides pulling out of thin box stock. Original installations often used short screws into particleboard, and years of use leave doors sagging out of alignment. We swap in longer, heavier-duty screws and, where needed, replace the hinge plates with CGI-compatible hardware that actually bites.
- Door and drawer misalignment after cabinet settling. Stanford homes on clay-heavy soils shift more than people expect. A cabinet run that looked square at install can drift, and we re-square and re-hang doors as part of the fix rather than forcing them with shims.
CGI Service in Stanford: What Local Conditions Mean for Your Equipment
Because Stanford’s buildable land runs through University planning and design review in addition to County building permitting, a CGI kitchen refacing or cabinet install that changes a door style, sink location, or appliance opening can force a trip back through campus review. That means the cabinet elevations and door/drawer specs have to be locked before the County permit is even issued, months ahead of install. Most contractors who work elsewhere don’t think about that sequencing. We do. In one of the mid-century faculty housing units near the Olmsted-era quad, we rebuilt a CGI sink base that had swollen particleboard and peeling edge wrap, matched the original door profile with CGI-compatible fronts, swapped in heavier-duty hinges, and sealed the sink-side seams. The refaced run held through the following winter instead of failing again in the wet season. That’s the difference between knowing Stanford and knowing cabinets.
CGI Models & Products We Service in Stanford
We work on CGI ready-to-assemble shaker lines, assembled shaker and flat-panel lines, refacing and door-and-drawer replacement systems, and melamine and thermofoil cabinet boxes. When the box is sound, we use CGI-compatible OEM hinges, slides, and edge-banding to keep the job straightforward and the look consistent. When the core is swollen or crumbling, we move to quality aftermarket hardware or full custom cabinetry. We keep common CGI-compatible hardware stocked for faster Stanford turnaround, so you’re not waiting on a specialty order when a hinge plate has stripped out and a door is sagging. For broader CGI project guidance, see our CGI sales & service page.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Stanford
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small & Partial Kitchen Remodels | $9,000 – $20,000 |
| Countertop Installation | $2,000 – $6,500 |
What drives the cost in Stanford is scope: a simple door-and-drawer reface on a shaker run costs far less than rebuilding water-damaged boxes and re-leveling the entire line. A free estimate includes a written, line-item scope so you see exactly where the money goes before you commit. Call (844) 384-3361 to schedule yours.
Serving Stanford, CA — Our Local Coverage Area
We’re based in the Stanford area and know this community well, from CGI service in West Menlo Park to the campus itself. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Stanford
It depends on what changes. If the door style, finish, sink location, or appliance opening stays the same, a reface typically does not require a new design review. If you want to change any of those, the project can go back through campus review, which adds weeks to the schedule. We help you map this out before you commit. Call (844) 384-3361 and we’ll walk through your specific run.
In Stanford, the most common cause is winter moisture—slab vapor, a slow plumbing drip, or years of humid air working against raw particleboard edges under the sink—just as we see with CGI service in Los Altos. Once the board swells, it loses structural strength. We rebuild the box with a moisture-resistant base and re-hang the existing doors when they’re still sound. If the whole run has taken water, replacement usually costs less than repeated patching.
If the peeling is limited to a few edges and the substrate underneath is clean, we re-bond the thermofoil and seal the seam. If the wrap has lifted across multiple doors or the substrate is swelling, replacing the fronts is the better call. Either way, we’ll show you the condition before we recommend work. Call (844) 384-3361 for a straight answer and a free estimate.
Yes. Campus and University-affiliated housing run on Stanford’s review calendar, not a typical city permit desk. We schedule installs around the approved permit window and plan material deliveries to match, because storing cabinet boxes on-site during a campus review delay just risks damage. That’s why we lock specs early and stage materials late.
It can, especially in older masonry or mid-century structures near the Olmsted-era quad where seismic retrofit requirements may already apply. If your remodel touches load-bearing walls or changes window and door openings, the County may flag it for structural review as part of the permit. We coordinate that with the University process so you’re not surprised mid-project.
Service Areas Near Stanford
We serve the Stanford service area and nearby communities across the Peninsula and South Bay. That includes CGI service in Ladera for homeowners on the west side, and CGI service in Portola Valley for hillside properties where moisture and movement hit cabinets differently. If you’re in Woodcrest, Menlo Park, or the surrounding unincorporated areas, give us a call.
Book Your CGI Service in Stanford Today
Whether it’s a failing thermofoil door, a swollen sink base, or a full kitchen remodel, we’ll diagnose it straight and quote it honestly. Call (844) 384-3361 to schedule your free estimate. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Stanford, CGI in Los Altos Hills, and the Peninsula since day one.