Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Santa Ana, CA | Workshop Contractors
We’re an independent construction crew that builds CWS cabinetry, countertops, and roofing accessories into Santa Ana homes every week. The thing that makes our CWS work different here is simple: we’ve spent years fitting these products into 1920s bungalows and Spanish Colonial houses where no wall is square and no floor is level. We’re not manufacturer-affiliated or authorized, which means we build to your house and California code, not to a sales program. Call (844) 384-3361 for a free estimate on CWS cabinet installation, countertops, or a full kitchen remodel in Santa Ana.
Why Santa Ana Residents Choose Us for CWS Service
Noel Figueroa grew up in the Vineyard neighborhood of Ontario, where the tradesmen who built half the houses on his street handed him his first framing hammer. He learned the fundamentals at Chaffey College and has spent the decades since working on everything from ground-up residential builds to full commercial tenant improvements. Around Ontario, he’s known for finish work that holds up under a second look: framing that’s square, tile that lines up at the grout joint, trim that actually meets the corner.
That background matters in Santa Ana because most of the housing stock here was built between 1900 and 1950. Spanish Colonial Revival, Craftsman bungalows, post-war stucco tract houses. Many still carry original knob-and-tube wiring, pier-and-beam foundations, and unpermitted garage conversions that surface the moment you open a wall. We know what’s behind these walls because we’ve opened hundreds of them. When we install CWS cabinets or countertops in Santa Ana, we’re not working from a template. We’re working from the actual house in front of us. See our CWS sales & service page for the full range of products we handle.
Styles & brands we work with
Common CWS Construction Problems We Solve in Santa Ana
- Frameless cabinet boxes racking on out-of-plumb plaster walls. In the bungalow blocks around downtown and the east side, 1920s plaster walls are rarely square. When a frameless CWS box gets screwed against a bellied wall, the box twists, doors go out of alignment, and seams separate. We shim and level before anything goes on the wall.
- RTA cabinet joinery loosening in dry heat cycles. Santa Ana’s semi-arid climate bakes west-facing and south-facing walls. The afternoon sun heats stiles, glue lines open, and ready-to-assemble CWS cabinets that were tight at install start to wobble. We reinforce joinery and seal boxes against the exposure.
- Quartz and granite tops cracking over pier-and-beam floors. Older Santa Ana homes sit on foundations that deflect. When a 1950s rear addition meets the original 1920s foundation, the slab moves differently on each side of the seam. Countertop cutouts at the sink or island are where cracks show up first.
- Hinges and drawer glides seizing from wind-driven dust. Santa Ana winds push fine dust through older window and door openings. In kitchens that absorb that dust year-round, CWS hinges and glides wear prematurely. We spec hardware for the exposure and seal the cabinet boxes.
- Cabinet runs and countertop seams separating along old foundation breaks. This is the chronic Santa Ana failure point. Where a later addition sits on its own shallow footing, everything above that seam moves. We probe and level that transition before any CWS box goes on the wall.
CWS Service in Santa Ana: What Local Conditions Mean for Your Equipment
In the 92701 and 92703 bungalow blocks, it’s common to find a 1920s house with a 1950s rear addition built on a separate, shallow foundation. The seam between the two is where cracks and settling almost always show up first. For CWS cabinet and countertop installs, that seam is the single biggest predictor of future failure. We’ve pulled cabinet runs away from walls that bellied out where the addition met the original pier-and-beam. We’ve seen quartz tops crack at the sink cutout because the subfloor deflected half an inch where the old foundation ended. Before any CWS kitchen goes in, we probe that transition, check for deflection, and level the wall plane. Most contractors in Santa Ana won’t touch that seam until after the cabinets start pulling away. We treat it as step one. Noel’s rule applies here: build it right the first time. The second time costs twice as much and nobody’s happy about it.
That’s the kind of local knowledge that shapes our work across the entire Santa Ana service area. We serve 92706, 92707, 92711, and 92712, plus the older blocks around downtown and the east side.
CWS Models & Products We Service in Santa Ana
We work with the full CWS residential line: framed and frameless kitchen cabinetry, ready-to-assemble (RTA) cabinet collections, granite and quartz countertop programs, and roofing accessory lines including gutters, flashing, and ventilation. When a CWS cabinet box is still sound, we use CWS OEM hinges, glides, and shelf hardware. When the OEM line is discontinued, we switch to quality aftermarket soft-close hardware. We won’t push a full cabinet replacement if refacing and re-hardwaring will get another 15 years out of solid boxes. For countertops, we recommend replacing rather than patching when a slab has cracked through the cutout, because a failed top over a settling Santa Ana floor will just crack again. On a 1920s bungalow off East Washington Avenue in 92701, we pulled a sagging CWS frameless cabinet run away from a plaster wall that had bellied out at the old foundation seam. We sistered and leveled the wall, shimmed the new CWS boxes to the corrected plane, and set a quartz top with the seam moved off the foundation break. The homeowner kept the original Craftsman trim and got a kitchen that finally sits square.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Santa Ana
Here’s what CWS cabinet and countertop work typically runs in Santa Ana. These are market-calibrated ranges, not quotes. Your exact number depends on the condition of your walls, the floor deflection under your kitchen, and the scope of what you’re replacing.
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Backsplash Installation | $800 – $2,500 |
What drives cost in Santa Ana specifically is the age of your house. A 1920s bungalow with a settled rear addition takes more leveling, more shimming, and more prep than a newer stucco tract house. A free estimate from us includes a look at your wall planes, floor deflection, and foundation seams. Call (844) 384-3361 to schedule yours.
Serving Santa Ana, CA — Our Local Coverage Area
We’re based in the Santa Ana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Santa Ana
Not without prep work, no. The addition sits on its own shallow footing, and the seam between old and newer foundation is where movement happens. We probe and level that transition before any cabinet box goes on the wall. If the floor deflects at the seam, we correct it first. Call (844) 384-3361 for an exact assessment, free estimates included.
Yes, when the boxes are still sound. We replace CWS OEM hinges, glides, and shelf hardware, then reface the fronts. In Santa Ana’s older homes, solid cabinet boxes are common even when the doors and hardware are shot. We’ll tell you honestly when refacing makes more sense than a full replacement.
It does. The semi-arid climate and hot, dry Santa Ana winds dry out glue lines and bake west-facing walls. RTA cabinet joinery loosens, hinges and glides wear faster, and veneer edges lift. We seal the boxes and spec hardware for the exposure. Call (844) 384-3361 to have us look at your specific exposure.
It can, especially if the slab spans the seam between the original foundation and a later addition. Pier-and-beam floors deflect, and cutouts at the sink or island are the most common crack points. We check subfloor deflection before installing any stone top. If a top has already cracked through the cutout, replacement is usually the right call.
Yes, in most cases. Santa Ana’s older neighborhoods have a lot of unpermitted garage conversions and informal additions. Bringing them up to current California code requires permits, and we handle that as part of the project. Call (844) 384-3361 to talk through what your specific property needs.
Service Areas Near Santa Ana
We work throughout Santa Ana and the surrounding areas, including Woodcrest, Anaheim, North Tustin, Orange, and Buena Park. For CWS cabinetry and countertop work further east, see our CWS service in Phelan page. For projects up in the high desert, we also provide CWS service in Piñon Hills.
Book Your CWS Service in Santa Ana Today
If you’re planning CWS cabinet installation, countertops, or a full kitchen remodel in Santa Ana, call (844) 384-3361 for a free estimate. We’ll assess your walls, floors, and foundation seams, then give you a straight answer on scope and cost.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Santa Ana and the Inland Empire since his first framing hammer.