Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Monte Sereno, CA | Workshop Contractors
We provide independent Jerith fence, gate, and railing installation and repair across Monte Sereno, and the one thing that separates our General Contractor – Monte Sereno Jerith work here is that we plan every run around the city’s own design-review process and the protected oaks that shape so many of these lots. You won’t get a generic product pitch from us. You’ll get a contractor who knows how a Jerith Signature or Majestic run needs to be set on a sloped, wooded Monte Sereno parcel so it stays square and true for years. Call (844) 384-3361 and we’ll walk the property line with you.
Why Monte Sereno Residents Choose Us for Jerith Service
Jerith has built ornamental aluminum fence, railing, and gate systems for decades, and our crew has installed and repaired enough of it on the Santa Cruz Mountain side of Silicon Valley to know the product line, the powder-coat finishes, and the footing details that actually hold up here. Monte Sereno is not a tract-housing market. Nearly every property has slope, tree canopy, or both, and the standard post-set that works on a flat Jerith repair in Los Gatos lot will fail on a hillside off Via Monte Drive when the winter runoff starts moving. Noel Figueroa learned early that square framing and true fence lines are the only honest work a contractor leaves behind, and the same standard applies to every Jerith panel we set in Monte Sereno. We are an independent contractor, not authorized or sponsored by Jerith, so our loyalty is to the property, not to a manufacturer’s sales target.
Styles & brands we work with







Common Jerith Construction Problems We Solve in Monte Sereno
- Powder-coat chalking on south and west exposures. Monte Sereno sits at foothill elevation above the valley floor, and that extra UV works hard on aluminum finishes. We see Jerith runs where the finish has gone chalky and dull on the street-facing side while the shaded side still looks new. We sand, etch, and re-coat with a color-matched system so the whole run reads uniform again.
- Post footings loosening on hillside lots. Seasonal runoff and root movement are constant forces on Monte Sereno’s sloped parcels. When a Jerith post starts leaning, it’s usually not the post that failed, it’s the shallow concrete set underneath it. We reset posts below the root zone with deeper footings and proper drainage so the freeze-thaw cycle and winter rain don’t work them loose again.
- Sagging or racked gates. An oversized double-drive gate hung on undersized posts will eventually fatigue the hinges and rack the frame. We see this constantly on Monte Sereno properties where the original fence was fine but the gate was an afterthought. We replace tired hinges with heavier hardware and, where the post itself has moved, reset it before re-hanging the gate.
- Corrosion at cut ends, welds, and scratch points. Aluminum doesn’t rust, but it does corrode where the protective finish has been compromised, especially near irrigation splash zones and drainage areas. The bottom rail takes the worst of it, and string trimmers scraping the base don’t help. We clean, treat, and re-coat affected sections before the corrosion spreads under the powder coat.
- Paint flaking where lawn equipment strikes the bottom rail. Monte Sereno’s larger lots mean more edge trimming. Repeated contact with a string trimmer peels the finish off the bottom rail, and once moisture gets under the coating, it creeps. We can touch up isolated areas or replace the rail if the damage has gone too far.
Jerith Service in Monte Sereno: What Local Conditions Mean for Your Equipment
Here’s the thing most Jerith owners don’t realize until a project stalls: because Monte Sereno’s lot minimums and residential design guidelines push nearly every project through the city’s own discretionary design review and neighbor-notice process, not a county permit counter, a Jerith fence or railing visible from the street or a neighbor’s view can be reshaped by that review before a post is ever set. That step doesn’t exist in neighboring Los Gatos or Jerith in Saratoga tract work. A homeowner off Daves Avenue might plan a six-foot Jerith Signature run along the front setback, and the city’s design review may come back with conditions on height, setback, or finish color based on how it reads from the road or the adjacent property. We have sat through enough of these reviews to know the questions before they’re asked, and we build our quotes around what will actually pass, not what looks good on paper. That’s the difference between a smooth Jerith installation in Monte Sereno and a fence that gets redesigned twice before the first post hole is dug.
Jerith Models & Products We Service in Monte Sereno
We work on the full Jerith product range: the Signature series ornamental aluminum fence, the Majestic series, the commercial and industrial heavier-gauge picket lines, and Jerith aluminum railings and driveway gates. We use genuine Jerith components, panels, posts, caps, hinges, and latches, where fit and finish matter most, and quality aftermarket hardware only where it outperforms, like self-closing gate hinges and heavier latch sets. For Monte Sereno turnaround, we keep common Jerith post caps, hinges, and touch-up coating stocked so a simple hardware swap doesn’t wait on a parts shipment. We also handle Cambrian Park Jerith service with the same stocked approach. Our honest stance on repair versus replace: resettable footings, finish touch-up, and gate hardware usually justify repair, but a racked or corroded run on failing posts is cheaper to replace than to chase section by section.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Monte Sereno
What you’ll pay for Jerith work in Monte Sereno depends on the run length, the slope, the access for footing work, and whether the city’s design review adds conditions that shape the scope. A flat, straightforward aluminum fence installation on accessible ground lands at the lower end of the range below. A hillside run with tree-root complications and a double-drive gate will push higher. Every quote starts with a free on-site look at the property line, the existing footings if there are any, and the review conditions already on file.
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Garage Conversion | $30,000 – $80,000 |
| Home Addition | $45,000 – $130,000 |
Call (844) 384-3361 for an exact quote on your Jerith project. Estimates are free, and we’ll tell you straight whether you’re looking at a repair or a replacement.
Serving Monte Sereno, CA — Our Local Coverage Area
We’re based in the Monte Sereno area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Monte Sereno
Yes. We set Jerith posts on deeper concrete footings clear of the root zone and rack the panels to follow the grade. The key is keeping the footing outside the dripline of protected oaks where the city’s tree-protection rules apply, which is standard practice for us on Monte Sereno lots.
Yes, in most cases. Monte Sereno runs its own discretionary design review and neighbor-notice process for street-visible structures, including fences and railings. We handle the submittal and know what the reviewers look for. Call (844) 384-3361 and we’ll check the specifics for your address.
Usually the gate post has moved, the hinges have worn, or the gate was oversized for the post it’s hung on. We diagnose it on site and typically fix it by resetting the post, installing heavier self-closing hinges, or both. It’s a common Monte Sereno problem on sloped driveways where runoff softens the soil around the post base.
Yes. If the posts are still set and the line is true, we can pull and replace individual panels, pickets, or rails. Where the posts have failed or the run is racked, we’ll tell you honestly that replacing the full section is the cheaper option over the long run. Call (844) 384-3361 and we’ll give you a straight read.
Yes. Aluminum doesn’t burn, and a properly installed Jerith run gives you a defensible, non-combustible boundary that won’t act as a fuel ladder the way wood fencing can. We set the posts deep enough to hold the fence through the wind events that come with wildfire season in the foothills.
Service Areas Near Monte Sereno
We run Jerith service from Monte Sereno into the surrounding communities, including Jerith service in Campbell, Jerith service in Boulder Creek, and the nearby areas of Los Gatos, Saratoga, and the Santa Cruz Mountain foothills. If you’re just outside Monte Sereno, call and ask, we’re likely already working in your neighborhood.
Book Your Jerith Service in Monte Sereno Today
We’re Jerith sales & service specialists who know Monte Sereno service area conditions better than anyone working the foothills. Build it right the first time. The second time costs twice as much and nobody’s happy about it. Call (844) 384-3361 to schedule your free estimate.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Monte Sereno and the surrounding Silicon Valley foothills.