Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Construction in Brisbane, CA | Workshop Contractors
We install and service Kohler tubs, showers, faucets, and vanities across Brisbane, CA as an independent contractor. Our crews have worked on enough hillside terraces and fog-damp bathrooms here to know that Kohler fixtures rarely fail on their own. The ground under the house moves, the marine air never fully dries out, and the fixture takes the blame. If your Kohler tub is leaking at the drain or your shower base feels soft, call (844) 384-3361 for a free estimate.
We’re not an authorized Kohler dealer or affiliate. We’re a general contractor that has installed and serviced Kohler products across Brisbane service area homes for years. That independence matters when we order parts. We spec genuine Kohler OEM cartridges, fill valves, and trim where fit and finish matter, and we tell you honestly when a fixture body is worth saving versus when the subfloor behind it is the real problem.
Why Brisbane Residents Choose Us for Kohler Service
Kohler makes a lot of different product lines, and they fail in very different ways. A Kohler Forté faucet in a flat-lot Daly City bathroom doesn’t see the same humidity swings as the same faucet on a hillside terrace above Brisbane’s flats. We know the Villager and Bellwether cast iron tubs that went into Brisbane’s mid-century houses, the Memoirs and Wellworth toilets in the post-war tract homes, and the Purist and Forté faucets that ended up in newer infill townhomes near the Bayshore.
Our owner, Noel Figueroa, learned framing from the generation of tradesmen who built his street in Ontario back when cut-and-fill pads and shallow footings were standard practice. He has spent the years since on job sites where the ground shifts and the finish has to hold up under a second look. That background carries over every time we set a Kohler cast iron tub on a Brisbane hillside lot.
We carry Kohler OEM cartridges, tank gaskets, trip-lever assemblies, and drain trim on our trucks. For older Brisbane homes where an OEM cartridge is discontinued, we keep a short list of aftermarket parts we trust. You get an honest repair-versus-replace recommendation, not a push toward whatever is easiest for us to sell.
Styles & brands we work with
Common Kohler Construction Problems We Solve in Brisbane
- Cast iron tubs leaking at the drain on hillside terraces. Brisbane homes above the flats were often built on cut-and-fill pads. Fill soil settles, the floor racks slightly out of level, and the cast iron tub’s drain and overflow seam opens up. We shim, re-level, and reset the drain before the enamel ever shows a crack.
- Kohler ceramic-disc cartridges seizing in fog-damp bathrooms. Marine fog off San Bruno Mountain keeps interior humidity high in Brisbane year-round. The ceramic discs in Kohler Purist and Forté faucets scale up or seize faster than they would a few miles inland. We clean or replace the cartridge and check water chemistry at the fixture.
- Cracked or loose toilet flanges in older bath floors. When the fill soil under a 1950s or 60s Brisbane bath floor settles, the Kohler china toilet sits fine while the flange underneath pulls loose. The wobble and leak look like a fixture failure. We reset the flange on a solid subfloor, not just caulk over it.
- Soft framing behind Kohler Choreograph or acrylic shower bases. On exterior walls in Brisbane, fog-driven damp and hillside drainage keep the framing wetter than anyone realizes. By the time we pull an old base, the waterproofing has often failed behind it. We replace the base and the framing behind it, not just the visible surface.
- Racked shower bases on settled floors. Kohler shower bases don’t crack on level ground. On Brisbane’s terraced lots, the base follows whatever the floor does. We check level with a laser before we set anything, and we correct the subfloor first if the reading’s off.
Kohler Service in Brisbane: What Local Conditions Mean for Your Equipment
Here’s the thing about Brisbane that people in flat, neighboring South San Francisco or Daly City never experience. On the steep streets above the flats, homes were frequently built on cut-and-fill pads and shallow footings. Engineers knew the ground would move a little; they built for the slope, not for permanence. Sixty years later, that movement shows up first in the bathroom. Before we set a new Kohler cast iron shower base or tub, we check level and support with a laser. Hillside fill settlement, not the fixture, is what usually causes the drain leaks and cracked flanges we open up here. A technician who only ever works flat lots will replace the drain gasket and call it fixed. We see it leak again a year later and know the floor moved.
On a hillside terrace off Kings Road above the flats, we opened a 1960s bath to convert an original Kohler Bellwether cast iron tub to a walk-in shower. The floor was out of level where fill soil under the shallow footing had settled. We shored and re-leveled the subfloor, reset the drain and closet flange, then set a Kohler cast iron shower base with a frameless glass enclosure. The fixture was fine. The ground under it was the problem.
Kohler Models & Products We Service in Brisbane
We install and service the Kohler cast iron tubs that came standard in Brisbane’s mid-century hillside and flats homes: the Villager and Bellwether alcove lines. We work on Memoirs and Wellworth toilets, which show up everywhere from post-war tract houses to newer townhomes near the Bayshore. We handle Forté and Purist faucet lines, Choreograph shower wall systems, and both cast iron and acrylic shower bases.
The parts decision always starts the same way. Where the fit or finish matters, we order genuine Kohler OEM. Where a discontinued cartridge or obsolete trim makes OEM cost-prohibitive, we use a quality aftermarket equivalent and tell you exactly what we’re putting in. Brisbane homeowners on older homes lean toward honest repair when the fixture body and rough-in are sound. We recommend replacement when slope movement or damp has compromised what’s behind the wall.
See the difference
Before
After
Before
After
Before
AfterKohler Service Pricing in Brisbane
Brisbane bathroom work costs what it costs because of what may be hiding under the floor. A tub-to-shower conversion on a settled hillside slab takes more shoring and leveling than the same job on a flat fill lot in the flats. Here are the ranges we quote across Brisbane, including 94005:
| Service | Brisbane Price Range |
|---|---|
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
Your free estimate includes a level check on the floor where the fixture is going, an inspection of the subfloor and flange, and a written line-item quote. We don’t give a number over the phone before we have looked at what’s under the tile. Call (844) 384-3361 to schedule a site visit.
Serving Brisbane, CA — Our Local Coverage Area
We’re based in the Brisbane area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kohler Construction in Brisbane
In most hillside Brisbane homes, the tub itself is fine. The drain and overflow leak because fill soil under the cut-and-fill pad or shallow footing has settled, and the tub now sits slightly out of level. The fix is shoring and re-leveling the subfloor, then resetting the drain assembly, not caulking over the gap. Call (844) 384-3361 and we’ll check the level before recommending anything.
Often yes. Many 1950s and 60s Brisbane bathrooms have enough footprint for a walk-in shower conversion once the old cast iron tub comes out, provided the subfloor and framing are sound. If we find settlement or moisture damage behind the walls, we will show you before we open anything further. The estimate is free and the scope is yours to approve.
It affects everything. Marine fog off San Bruno Mountain keeps interior humidity high year-round, and wet winters keep hillside sites damp. That means exterior-wall shower bases and Choreograph wall systems need correct ventilation and a proper waterproofing layer behind them, or the framing rots quietly while the tile looks fine. We spec for this in every Brisbane install.
If the faucet body is sound and the finish is in good shape, replacing the cartridge is a $150 to $300 repair versus a $500-plus faucet replacement. On Brisbane hillside homes where humidity and water chemistry vary block to block, we usually recommend the cartridge. We will tell you honestly when the body threads are shot and a new faucet makes more sense. Call (844) 384-3361 for an exact quote.
Yes. A vanity on a settled floor will rack, doors will bind, and the countertop seam will open. We level the vanity with shims on the floor, scribe the toe kick to the actual floor line, and re-level the drain trap to match. On Brisbane hillside homes, this is standard practice, not an upsell.
Service Areas Near Brisbane
Beyond Brisbane, our crews also cover Woodcrest, Anaheim, North Tustin, Orange, Loma Linda, and Buena Park. For Kohler service on the coast side, see Kohler service in Pacifica. For the bay side, see Kohler service in Visitacion Valley. And for the full Kohler sales and service page covering models, parts, and product lines, visit Kohler sales & service.
Book Your Kohler Service in Brisbane Today
If your Kohler tub is leaking, your shower base feels soft, or you just want a straight answer about repair versus replacement, call (844) 384-3361. We’ll schedule a free estimate, check the level and the subfloor, and give you a written line-item quote. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Brisbane since 2008.