Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Ben Lomond, CA | Workshop Contractors
We install, reface, and repair KraftMaid cabinetry throughout Ben Lomond, and we do it as an independent contractor, not a manufacturer-authorized dealer. What sets our KraftMaid work apart here is that we build for slope, moisture, and redwood canopy, the same three conditions that quietly tear apart cabinetry installed by flatland crews. If you’re planning a KraftMaid kitchen or bath project in Ben Lomond, call (844) 384-3361 for a free estimate.
Why Ben Lomond Residents Choose Us for KraftMaid Service
Noel Figueroa, our owner and general contractor, grew up around tradesmen who taught him that framing either holds up under a second look or it doesn’t. That same standard follows our KraftMaid work. We’ve pulled apart enough cabinet boxes in Ben Lomond to know which KraftMaid lines hold up in this climate and which ones need upgrading before they’re even installed. Momentum series MDF doors, Vantage plywood boxes, Passage full-access cabinetry, we know how each behaves after a wet winter and a dry summer.
We’re local to the Santa Cruz Mountains. We understand Ben Lomond service area conditions because we work in them every week. We also source KraftMaid-compatible hardware directly, so a corroded hinge or a seized drawer glide doesn’t mean waiting three weeks on a manufacturer backorder. One contractor for the cabinetry, the countertops, the plumbing, and the wall repairs behind them.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Ben Lomond
- Corroded drawer glides and hinges on sink bases. Ben Lomond’s wet winters push moisture into unvented mountain cabins. The hardware on KraftMaid sink-base cabinets takes the worst of it. We replace seized glides with OEM KraftMaid parts where available, or quality soft-close aftermarket hardware where the original is discontinued.
- Swollen or delaminated MDF door panels. Thermofoil and painted MDF doors swell near dishwashers and sinks, especially in homes without mechanical ventilation. We’ve watched Momentum-series doors absorb enough atmospheric-river dampness to delaminate at the bottom edge within a few seasons. Refacing with a more moisture-tolerant door profile is often the honest fix.
- Racked face frames and pulled-away boxes. Many Ben Lomond homes sit on pier-and-beam or post foundations that shift seasonally on sloped lots. When the floor moves, cabinetry fastened to the wall and floor moves with it, opening joints and racking face frames. We reset, shim, and re-anchor before the countertop ever goes down.
- Swollen particleboard toe kicks. Slow leaks and ground-level damp wick into unsealed toe kicks on older KraftMaid runs. By the time you notice the swelling, the box is compromised. We cut out and replace affected sections rather than patching over rot.
- Out-of-level installations on steep lots. A cabinet line installed dead level on a sloped Ben Lomond floor looks crooked against the wall. We shim and scribe to the actual plane of the room, not the bubble. That’s the difference between a door that sits flush and one that binds every spring.
KraftMaid Service in Ben Lomond: What Local Conditions Mean for Your Equipment
On the uphill side of Highway 9, saturated redwood-rooted slopes above many Ben Lomond homes creep after big winter rains. The soil moves a fraction of an inch each season, and over a decade that fraction becomes a wall that’s no longer plumb and a floor that’s no longer level. Kitchen and bath cabinetry has to be shimmed, anchored, and flashed against surfaces that are still moving. We refaced a KraftMaid Vantage kitchen in a redwood-era cabin off the uphill side of Highway 9 where the sink-base drawer glides had corroded and the MDF doors had swollen from years of winter damp. The wall behind the sink was out of level by nearly three-quarters of an inch. We replaced the swelled boxes with plywood-carcass units, swapped in OEM-compatible soft-close glides, reset the face frames against the actual wall plane, and topped it with a new quartz counter. The doors still sit flush through a full wet season. That’s the kind of install flatland Santa Cruz crews don’t see often enough to plan for.
KraftMaid Models & Products We Service in Ben Lomond
We work across the KraftMaid line: Momentum, Vantage, Passage, and the frameless euro-style cabinetry with full-extension soft-close drawers. We handle full installations, refacing, and repair on all of them. Our parts approach is simple. When a box is sound, we use OEM KraftMaid hinges, glides, and touch-up materials. When a particleboard carcass has swelled or a door face has delaminated beyond repair, we say so and recommend replacing that cabinet run with a plywood-box alternative that will survive KraftMaid sales & service conditions in the mountains. We also install quartz and granite countertops over existing KraftMaid boxes when the structure is worth keeping.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Ben Lomond
Here’s what KraftMaid work typically runs in the Ben Lomond market. These are honest ranges, not bait numbers.
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
What drives the number in Ben Lomond specifically is access, slope, and the state of the walls behind the cabinets. A kitchen on the uphill side of Highway 9 with a narrow driveway and a moving exterior wall costs more than the same layout on a flat Santa Cruz slab. Our free estimate walks the site, checks the floor and wall conditions, and gives you a written line-item scope. Call (844) 384-3361 to schedule yours.
Serving Ben Lomond, CA — Our Local Coverage Area
We’re based in the Ben Lomond area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help. We also provide KraftMaid in Lompico and surrounding mountain communities.
FAQs – KraftMaid Construction in Ben Lomond
Yes, if it’s the right line and it’s installed with Ben Lomond’s moisture in mind. The same holds for our Brookdale KraftMaid service. Vantage and Passage series use plywood boxes that handle damp air far better than particleboard or MDF carcasses. We also recommend mechanical ventilation upgrades in older cabins where winter humidity has nowhere to go. A $400 vent fan beats a $4,000 cabinet redo. Call (844) 384-3361 and we’ll walk your space before you order anything.
In Ben Lomond, it’s usually both. Seasonal slope movement shifts the cabinet box enough to bind a drawer that worked fine in the fall, and the added humidity swells the wood. We check the glide first, then check whether the face frame has racked. If the floor is moving under the cabinet, new glides alone won’t fix it. We’ll tell you which one you’re dealing with, and what it costs to fix properly.
We can, when the boxes are still square and the drawer glides are salvageable or worth replacing. We’ve refaced plenty of KraftMaid Vantage and Momentum runs in Ben Lomond, plus handled KraftMaid service in Felton. What we won’t do is reface a particleboard box that’s swollen at the toe kick or soft at the sink base. Putting new doors on a failing carcass wastes your money. We’ll show you the difference during the estimate.
We shim and scribe every run to the actual plane of the floor and the wall, not to a level line. On uphill Highway 9 lots where the slope creeps, we also anchor the boxes to the studs with a little more give than a flatland install. The cabinet face has to look right against a wall that isn’t plumb. That’s the part that separates a mountain install from a valley install. Call (844) 384-3361 to have us look at your specific floor.
Yes, when the boxes are worth keeping. We’ve installed quartz over existing KraftMaid runs in Ben Lomond many times. Our Mount Hermon KraftMaid service covers the same quartz-over-cabinet work. The test is whether the cabinet tops are within tolerance for a stone slab, and whether the boxes can carry the weight without sagging. If the boxes are racked or swollen, we’ll recommend replacing them before the counter goes down. The counter is only as stable as what’s under it.
Service Areas Near Ben Lomond
We serve Ben Lomond and the surrounding mountain and valley communities. That includes KraftMaid service in Bonny Doon just over the ridge, KraftMaid service in Cambrian Park down toward the valley floor, plus Felton, Boulder Creek, and Brookdale. If you’re in the San Lorenzo Valley or just off Highway 9, we’re close enough to walk the site before the estimate.
Book Your KraftMaid Service in Ben Lomond Today
We schedule estimates around Ben Lomond every week. Call (844) 384-3361 and we’ll set a time, walk the job, and give you a written scope with real numbers. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Ben Lomond and the Santa Cruz Mountains.