Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Colma, CA | Workshop Contractors
We install and service KraftMaid cabinetry across Colma, CA, and we do it for the buildings that actually exist here: funeral homes, dealership customer lounges, office break rooms, and civic facilities. The single biggest difference in our KraftMaid work in Colma is that almost none of it goes into houses, because Colma barely has any. Call (844) 384-3361 for a free estimate on your project.
As an independent KraftMaid service provider, we are not manufacturer-affiliated or authorized. That matters because we are free to tell you the truth: when a box is worth saving, we save it. When it is not, we say so. We have provided KraftMaid in Pacifica and across San Mateo County for years, and we know exactly how they hold up in the fog belt between Daly City and the bay. If you are planning a kitchen or break-room build in Colma, or repairing cabinets that have been fighting the damp for a decade, you will get a straight answer from us.
Why Colma Residents Choose Us for KraftMaid Service
Most contractors in this part of the Peninsula talk about cabinet work in residential terms. We do not, because Colma is not a residential town. We have spent enough time on job sites along El Camino Real and the Mission Street edge to know that cabinet boxes here sit on slab-on-grade commercial floors, behind reception desks, and inside prep rooms where the fog never really leaves the air. That changes everything about how you install, and everything about what fails.
Noel Figueroa, our owner and general contractor, learned framing before he ever touched finished cabinetry, and he will tell you the same thing he tells every client: a cabinet is only as good as the surface under it and the air around it. We shim and seal the plinth. We spec moisture-resistant assemblies. We match KraftMaid OEM hinges, drawer glides, and door faces when the box is still sound, and we will not patch a delaminated particleboard panel and call it a repair.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Colma
- Thermofoil and laminate door faces lifting on Vantage boxes. A damp, under-ventilated building accelerates the adhesive failure at the door edges. We see this in older Colma commercial spaces where the HVAC was sized for people, not for moisture control. We replace the faces or refit with painted maple doors depending on the box condition.
- Particleboard and MDF box panels swelling at the toe kick and sink base. Slab-on-grade floors wick moisture straight into the bottom of the cabinet. In Colma’s fog belt, this is the most common failure we tear out. The fix usually starts with a sealed, shimmed plinth and a dry substrate before any new box goes in.
- Adjustable shelf pins and cam hardware loosening in full-overlay Momentum doors. Heavy daily commercial use, the kind you get in a dealership customer lounge or a funeral-home reception area, works hardware loose. We set and replace pins, reset cams, and upgrade to soft-close hinges where the doors have been slammed five hundred times a week.
- Painted and stained door faces checking and hazing on south-facing runs. Sun through the fog breaks down finishes in ways full sun does not: uneven drying, film shrinkage, micro-crazing. We see it on El Camino Real storefronts with big glass. The doors can often be refinished; the haze is a film failure that needs a new face.
- Drawer glides binding after years of weight and humidity cycling. The damp air makes wood and MDF move. Ball-bearing glides on KraftMaid boxes tolerate some of it, but not forever. We swap in proven aftermarket full-extension slides when the OEM glide is worn, and the drawer usually runs better than the day it was installed.
KraftMaid Service in Colma: What Local Conditions Mean for Your Equipment
Colma’s soil is essentially a cemetery substrate: sandy, drained, and full of older interments. That means any ground disturbance, even for a kitchen or break-room footprint, comes with a mandatory archaeological and cultural monitor requirement that can stop a job cold if you did not plan for it. We know the drill in Colma. We coordinate the monitor, we schedule around the stop-work windows, and we do not let a cabinet install turn into a permit problem. This is not a concern in neighboring cities. In Colma it is part of every job that touches the ground.
On a KraftMaid service in South San Francisco area funeral-home reception and break-room build just off El Camino Real, our crew tore out water-swollen particleboard boxes and set KraftMaid Momentum full-overlay cabinets on a sealed, shimmed plinth to keep the toe kick off the slab. We swapped the failing thermofoil door faces for painted maple and fitted soft-close hinges. The room has stayed square and dry through two fog seasons. That is the kind of work Colma actually needs, and it is the kind we know how to do.
KraftMaid Models & Products We Service in Colma
We install and service the full KraftMaid range: Vantage framed cabinetry with oak, maple, and thermofoil door options; Momentum full-overlay framed boxes in painted and stained finishes; Serenade frameless full-access cabinets for tight commercial footprints; and the Bath and vanity lines for restrooms and prep areas. When a door or drawer need to be matched, we source KraftMaid OEM faces wherever the box is still sound. When OEM parts are backordered, we use proven aftermarket full-extension slides and soft-close hinges that we stock for fast Colma turnaround. We will never fake a match.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Colma
What you pay depends on the scope, the box condition, and whether you are replacing faces or replacing everything down to the plinth. Here are the ranges we work with in Colma:
| Service | Typical Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Roof Replacement | $8,000 – $20,000 |
A free estimate from us includes a site visit, a look at the existing boxes and substrate, and a written line-item scope. No guessing over the phone. Call (844) 384-3361 to schedule yours.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Colma
No. Workshop Contractors is an independent general contractor that installs and services KraftMaid cabinetry. We are not manufacturer-affiliated or authorized by KraftMaid. That independence means we can be honest about when a repair makes sense and when replacement is the better call, without a manufacturer pushing parts.
Cabinet installation in Colma typically lands between $4,000 and $13,000 depending on the number of boxes, the substrate condition, and whether we are refitting or setting new. A full kitchen remodel with KraftMaid boxes runs $14,000 to $45,000. Call (844) 384-3361 for an exact quote, and the estimate is free.
We match KraftMaid OEM hinges, drawer glides, and door or drawer faces whenever the box is still sound. If OEM parts are backordered, we install proven aftermarket full-extension slides and soft-close hinges that we stock locally. We will always tell you which one you are getting and why.
We work on Vantage, Momentum, Serenade, and the Bath and vanity lines. That covers framed and frameless boxes, thermofoil, painted, and stained door faces, and the hinge and glide hardware that ships with each line. If you are not sure which line you have, we can identify it on the site visit.
For a typical commercial break-room or reception-area install, count on one to two weeks from tear-out to finish, assuming no ground disturbance. If the job involves new footings or slab work, the archaeological monitor requirement in Colma can add time. We schedule for it up front. Call (844) 384-3361 and we will give you a realistic timeline after seeing the space.
Service Areas Near Colma
We serve Colma and the surrounding communities across the Peninsula. Our team regularly works in KraftMaid service in Broadmoor, KraftMaid service in Daly City, and the nearby corridor towns. If you are in the fog belt, we cover you. Reach us at (844) 384-3361 to confirm your location.
Book Your KraftMaid Service in Colma Today
If your Colma cabinets are swollen, peeling, or simply past their useful life, we can look at them and tell you the truth about what it will take. Call (844) 384-3361 to schedule your free estimate. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Colma and the surrounding Peninsula since the day he first picked up a framing hammer.