Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Freedom, CA | Workshop Contractors
We install, retrofit, and repair KraftMaid cabinetry across Freedom as an independent crew, not as a KraftMaid dealer or authorized agent. That independence matters here because KraftMaid work in Freedom runs through unincorporated Santa Cruz County permitting, not a Watsonville city counter, and the coastal damp means cabinet boxes fail differently than they do inland. Call (844) 384-3361 for a free estimate on KraftMaid cabinet installation, refacing, or full kitchen remodeling in Freedom.
Why Freedom Residents Choose Us for KraftMaid Service
KraftMaid cabinetry has decades of name recognition across the Pajaro Valley, and we have installed enough of it to know which boxes hold up and which ones do not. We work on the KraftMaid sales & service side of your kitchen with the same eye we bring to every structural remodel we run: measure the room, check what is behind the drywall, and plan the job so the inspection passes and the cabinets stay square.
Noel Figueroa runs Workshop Contractors, and his background in construction technology and residential framing means our crew understands what a cabinet order does to a room before the first box gets unboxed. We are a Freedom service area general contractor that installs the whole kitchen: cabinetry, countertops, sink, valving, and the rough framing behind them. When your KraftMaid order arrives with a damaged corner or the wrong door profile, the person who ordered it answers the phone.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Freedom
- Swollen particleboard against damp exterior walls. In Freedom kitchens where a cabinet run sits against a poorly flashed exterior wall, Pajaro Valley fog and winter damp wick into the particleboard toe kicks and shelf pin holes. Doors stop sitting flush, and the box itself goes soft. We level and re-flash before we set a single new cabinet.
- Painted maple and cherry door faces checking at the stiles. Older, under-insulated Freedom-area kitchens collect interior condensation. KraftMaid painted and glazed door faces respond by checking and peeling where the stile meets the panel. Matching touch-up finishes is part of what we do, and we will tell you when a door is gone far enough that refinishing is throwing good money after bad.
- Base cabinet bottoms sagging under heavy cookware. Cast-iron pans and a stack of plates will eventually bow a particleboard-core base bottom, especially where an earlier remodel never added a proper sub-top. We sister in solid plywood sub-tops and re-hang the doors so the carcass stops working against itself.
- Soft-close dampers failing after a decade of daily use. Drawer glides pulling out of tired particleboard sides and dampers that no longer catch are common on 1990s and early-2000s KraftMaid runs around Freedom. We replace with OEM KraftMaid hardware where available, and quality aftermarket soft-close units when factory parts are backordered.
- Warped drawer boxes that bind mid-track. Fog-season humidity in the valley expands particleboard drawer sides, and suddenly a drawer that opened fine in September grinds in February. We square the drawer, or refit the glides, and sometimes the honest fix is a new drawer box. We will tell you which one your kitchen needs.
KraftMaid Service in Freedom: What Local Conditions Mean for Your Equipment
Because Freedom is unincorporated Santa Cruz County, a KraftMaid cabinet order tied to a kitchen remodel here is permitted and inspected through county channels rather than a Watsonville KraftMaid service city counter. That changes how we sequence the work. We build the load-bearing and rough-in phases around county inspection passes, not a city plan check timeline, and we have learned to time cabinet delivery so it does not sit in a garage or a job trailer while a county inspector gets rescheduled. The reason this matters to KraftMaid owners specifically: a cabinet run is only as straight as the framing behind it, and county inspectors here look at that framing before the drywall closes it up. If the wall is out of level and we do not catch it before inspection, your new KraftMaid boxes get shimmed to compensate and the doors read crooked forever. Around the Freedom Boulevard corridor we have corrected more than a few kitchens where an out-of-area installer never accounted for that sequence. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
KraftMaid Models & Products We Service in Freedom
We install and retrofit the full KraftMaid line in Freedom kitchens: Vantage, the all-plywood box line with full-overlay doors; Momentum, the quick-ship semi-custom SKUs; Classic and Portico painted and glazed door styles; and Passage full-access frameless cabinetry. Our parts approach is simple: we use OEM KraftMaid hinges, glides, and touch-up finishes where the box is sound, and quality aftermarket soft-close hardware when OEM parts are discontinued or backordered. If a box has swollen or delaminated panels from moisture, we tell you honestly. Replacing that cabinet run beats re-hanging doors on a failing carcass. We keep common repair stock local so a Freedom service call does not stall waiting on a hinge pack.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Freedom
KraftMaid work in Freedom spans a wide band because the job might be five cabinet boxes or a full kitchen down to studs. Here are the ranges we quote most often:
| KraftMaid Project Type | Typical Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the cost is scope: how much drywall and rough framing we touch, whether the county needs a structural or plumbing check, and what surface you pair with the boxes. A free estimate includes a line-item look at the room, and we will tell you where the money should go before you spend a dollar. Call (844) 384-3361 to schedule yours in Freedom.
Serving Freedom, CA — Our Local Coverage Area
We’re based in the Freedom area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Freedom
Do I need a county permit to replace KraftMaid cabinets in my Freedom kitchen?
Cabinet replacement alone usually does not trigger a permit, but the moment we touch electrical, plumbing, or remove and re-frame a wall, Santa Cruz County unincorporated permitting applies. We handle the permit scope and sequence for you, so the inspection pass is not your problem to chase. Call (844) 384-3361 and we will tell you what your specific kitchen actually needs before you commit.
My KraftMaid cabinet boxes feel soft near the exterior wall – is that fixable?
Sometimes. If the panel is just surface-swollen but the carcass is square, we can brace and re-flash the wall behind it. If the particleboard has delaminated from sustained moisture, the honest fix is replacing that run, not patching it. We have done both in Freedom, and we will tell you which one your boxes need. A free estimate costs nothing: (844) 384-3361.
Can you match new KraftMaid cabinets to existing Vantage or Momentum boxes I already have?
Yes, within reason. KraftMaid door profiles and finishes change over product cycles, so an exact match depends on how old your run is and which finish code it carries. We check the existing door against current KraftMaid samples and tell you honestly whether a match makes sense or whether you would be better off refacing the whole run for continuity.
What’s a realistic budget for a small Freedom kitchen remodel with KraftMaid cabinets?
A smaller Freedom kitchen with KraftMaid boxes, a modest countertop, and no structural surprises generally lands in the $14,000 to $25,000 range. The two factors that move the number here are county-mandated mechanical updates and whatever we find behind the walls on an older Pajaro Valley house. Call (844) 384-3361 for a line-item estimate tailored to your actual kitchen, not a brochure.
Do KraftMaid drawers and hinges need OEM parts to work right?
Not always. OEM KraftMaid hinges and glides are the right call while they are available, because the screw patterns and overlay specs match without modification. When factory parts are discontinued or backordered, a quality aftermarket soft-close hinge or glide can often do the job just as well, and we will tell you which route makes sense before we order anything.
Service Areas Near Freedom
We run KraftMaid service from Freedom across the surrounding Pajaro Valley and into nearby communities. That includes KraftMaid service in Amesti to the northwest, and KraftMaid service in Aptos Hills-Larkin Valley up toward the ridges. We regularly work in Watsonville, La Selva Beach, and Corralitos as well.
Book Your KraftMaid Service in Freedom Today
On an older in-town lot near the Freedom Boulevard corridor, our crew pulled a 1990s KraftMaid Classic Maple run with swollen, sagging base bottoms. We sistered in solid plywood sub-tops, set new KraftMaid boxes on leveled shims, topped them with Silestone quartz, and chased the moisture source before it could ruin the second cabinet set. That is the standard we bring to every Freedom job. Call (844) 384-3361 to schedule your free estimate.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Freedom and the Pajaro Valley with independent KraftMaid in Corralitos and surrounding areas.