Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Millbrae, CA | Workshop Contractors
We install, reface, and repair KraftMaid cabinetry across Millbrae as an independent contractor, not a manufacturer-authorized dealer. Most of our KraftMaid work here happens on 1940s – 60s ranch homes where the boxes are still square but the doors are delaminating from decades of marine fog, which means we’re usually re-dooring or refacing rather than gutting. Call (844) 384-3361 and we’ll tell you straight which route makes sense for your kitchen.
Why Millbrae Residents Choose Us for KraftMaid Service
We’ve pulled apart enough KraftMaid boxes over the years to know exactly where they fail and where they hold up. The Vantage and Momentum lines use different box construction than what you’d find in a budget line, and the Chatham and Marquis door styles each have their own finishing quirks. Noel Figueroa runs our shop, and he grew up around the kind of tradesmen who passed down a framing hammer and expected you to keep your corners square. That matters when you’re fitting cabinet runs into walls that haven’t been straight since Eisenhower was president.
Millbrae is our home turf. We know the housing stock here, the permit counter downtown, and the way salt-laden air off the bay works on painted cabinet doors year after year. When we quote a KraftMaid install or reface in Millbrae, we’re quoting the job the way it’ll actually go in, not the way a catalog shows it. Visit our KraftMaid sales & service page to see the full scope of what we handle.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Millbrae
- Door and drawer front delamination from marine fog. Millbrae sits right against the bay, and that damp air finds its way into kitchens through older window seals and uninsulated exterior walls. We regularly see factory-finished Chatham doors peeling at the corners where moisture wicked in over decades. Most of the time the box is still solid, so we re-door it and get another twenty years out of the cabinet.
- Sink-base box swelling from slow plumbing leaks. A lot of Millbrae homes still run original galvanized plumbing, and a pinhole leak behind the sink can swell a particleboard KraftMaid box before you ever see water on the floor. By the time the door stops closing right, the box is usually done. We replace the box, fix the framing behind it, and get the new cabinet sitting square.
- Soft-close hardware failing when walls are out of square. Post-war tract framing in Millbrae can run a half-inch out of plumb across a ten-foot wall. If the cabinet boxes were shimmed sloppily on the original install, the hinges bind and the glides wear out years early. We re-hang the boxes square before we swap hardware, otherwise you’ll be back in the same spot next year.
- Finish cracking at door joints from seasonal movement. Millbrae’s fog gives way to warm dry spells, and a cabinet on an exterior wall will expand and contract all year long. Painted KraftMaid doors from the factory finish era crack at the joinery when that movement compounds. We can often save the box and replace the affected doors with a finish that actually matches, not just a close approximate.
- Tight-lot cabinet access problems near El Camino. Homes east of downtown sit close enough to the property line that you can sometimes touch the neighbor’s stucco from your side yard. A standard cabinet box won’t make the turn through a three-foot side gate, which means crane time or conveyor work. We plan for that before we order anything, not the morning of install.
KraftMaid Service in Millbrae: What Local Conditions Mean for Your Equipment
On the flat streets near downtown and the BART/El Camino corridor, Millbrae lots were built tight sixty and seventy years ago, and second-story or rear kitchens weren’t designed for modern cabinet sizing. A 36-inch sink base with a full-depth rollout won’t just walk up a narrow side yard on two guys’ shoulders. We’ve run cranes on more than a few jobs near Taylor Middle School, lifting KraftMaid boxes over a roofline because there was no other clean path. That changes the schedule, the sequencing with the neighbor, and sometimes the order you install the kitchen in first, boxes up top before countertops below. It’s a logistics problem a KraftMaid in Burlingame contractor or San Bruno pro doesn’t face in the same way, because those lots aren’t this compressed. If you’re planning a kitchen addition or full remodel on one of those streets, we’re already thinking about crane placement and staging before the first cabinet gets ordered. Meanwhile, homes west of El Camino with actual side yards give us more conventional access. Same KraftMaid product, very different job site.
On a 1950s ranch near the BART/El Camino corridor, we replaced a failing KraftMaid Vantage kitchen where the sink-base box had swollen from years of slow plumbing leaks and the Chatham doors were delaminating from marine fog. The side yard was three feet wide at its best point, so we craned the new cabinet boxes over the roofline and coordinated staging with the neighbor across the fence. New Vantage boxes went in with upgraded soft-close glides and a quartz top. The homeowner ended up with a square, dry kitchen that finally fits the lot it was built on.
KraftMaid Models & Products We Service in Millbrae
We install and repair the full KraftMaid lineup you’ll find in Millbrae kitchens: the Vantage series, the Momentum series, and both the Chatham and Marquis door styles. When a box is sound and the doors are the problem, we source genuine KraftMaid replacement doors and drawer fronts so the finish and reveal match the rest of the kitchen. When OEM soft-close glides or hinges are backordered or cost too much to make sense, we use quality aftermarket hardware with the same or better durability. Our honest stance: if the boxes are square and solid, re-dooring or refacing is the smart money. If the boxes are swollen or delaminated, replacement is the better investment, and we’ll tell you that before you spend a dollar.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Millbrae
Here’s what KraftMaid work typically runs in Millbrae, based on the kitchen’s scope and the condition of the existing boxes:
| Service | Typical Millbrae Range |
|---|---|
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Kitchen Design & Layout | $14,000 – $45,000 |
What moves the number most in Millbrae is access. A kitchen on the first floor with a wide side yard costs less to install than a second-story kitchen near El Camino that needs a crane. The free estimate includes a walk-through of the existing boxes, a straight read on whether they’re worth saving, and a written line-item quote so you know what you’re paying for. Call (844) 384-3361 to schedule yours.
Serving Millbrae, CA — Our Local Coverage Area
We’re your local Millbrae General Contractor and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Millbrae
Yes, we can order genuine KraftMaid Chatham doors and drawer fronts to match your existing run, then build or re-box the cabinetry to fit your addition. The finish match is never perfect on aged cabinets, because the old ones have been fading and expanding in Millbrae’s fog for years. We tell you what the blend will look like before we order. Call (844) 384-3361 and we’ll bring finish samples to the house.
Could be either, but around Millbrae it’s usually moisture from both directions: salt-laden fog air outside and years of slow sink leaks inside. We inspect the door, the box, and the plumbing behind it before we point at a cause. If it’s a materials issue, we’ll discuss a warranty path. If it’s the marine air, replacement with a properly sealed finish is the only real fix.
Cabinet replacement without moving plumbing, electrical, or walls generally doesn’t trigger a Millbrae building permit. But if your KraftMaid install is part of a kitchen addition or you’re altering plumbing lines for a new sink base, the city will want plans and inspections. We handle the permit paperwork when it’s needed and tell you upfront if your job requires it. Call (844) 384-3361 for a straight answer on your specific kitchen.
We stage them off-site or on the street, then use a crane or conveyor through the side yard or over the roofline depending on your lot’s layout. We’ve done it on 1950s ranches near the BART corridor where the side yard wasn’t wide enough for two men to walk side by side. It adds logistics cost, but it’s the only way to get full-size boxes into some of these kitchens without disassembling the house.
KraftMaid’s box construction is solid enough to work, but the real question is how the installer handles the framing behind it. We shim and scribe to the wall, not to the cabinet, so the doors close square and the glides don’t bind. In a small 1940s Millbrae kitchen, we’d usually run Vantage boxes with upgraded soft-close hardware and a simple door style that doesn’t fight the room. Call (844) 384-3361 and we’ll give you a design read before you commit to a line.
Service Areas Near Millbrae
We serve Millbrae and the surrounding Peninsula communities, including Millbrae service area coverage across 94030. We also handle KraftMaid work in KraftMaid service in Moss Beach and KraftMaid service in San Bruno, where the fog and the tight lots create a similar set of challenges.
Book Your KraftMaid Service in Millbrae Today
If your KraftMaid boxes are square and the doors are tired, we can reface or re-door them. If the boxes are swollen, we’ll replace them right. Either way, you get one contractor accountable for the whole kitchen. Call (844) 384-3361 to schedule a free estimate and we’ll walk the job with you. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Millbrae and the surrounding Peninsula.