Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Cathedral City, CA | Workshop Contractors
We install and service Mr-Glass shower enclosures and glass products across Cathedral City, California as an independent general contractor, not a manufacturer-authorized shop. What makes our Mr-Glass work different here is that we build and repair glass inside full kitchen and bath remodels, which means we’re the ones who framed the opening, set the tile, and know exactly why a 1970s east-side tract home’s shower enclosure behaves differently than one in a newer infill build. If you’re planning a walk-in shower, tub-to-shower conversion, or a glass repair in Cathedral City, call (844) 384-3361 and we’ll come look at the actual opening, not just the glass.
Why Cathedral City Residents Choose Us for Mr-Glass Service
Most glass companies in the Coachella Valley only touch the glass. They show up, measure, order a panel, and leave. We’re a full general contractor, so when a Mr-Glass enclosure fails in Cathedral City, we can tell you whether the problem is the hinge, the glass, the rough opening, or the tile curb underneath, because we’re the ones who build those curbs and rough openings. Noel Figueroa, our owner and general contractor, grew up around tradesmen in Ontario’s Vineyard neighborhood and spent years framing, tiling, and setting glass across the Inland Empire before building Workshop Contractors. That dual background matters in a city where heat and dust punish every material choice. We’re the independent Mr-Glass service provider who also understands load paths, slab movement, and stucco behavior, so we don’t chase symptoms. We find the cause, and we fix it with parts and methods suited to Cathedral City’s actual conditions.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Cathedral City
- Hinge screws loosening and doors sagging. Cathedral City summer heat cycles expand and contract the aluminum framing and the slab-set tile around Mr-Glass pivot doors. Over a few seasons, hinge screws back out and the door drops until it drags the curb. We re-set the hinges, often with anchors sized for the substrate, and realign the door so it closes on its own without contact.
- Cloudy, sand-scoured glass that won’t clean. Cathedral City’s mineral-heavy water etches glass from the inside, and blowing sand from the valley’s wind events scours the exterior face. Once the surface is etched, no cleaner restores it. We replace just the glass panel when the frame is sound, and we can spec glass coatings that resist the next few years of dust better than untreated original panels.
- Dried-out silicone seals and sweep gaskets. Summers above 105°F and intense UV bake silicone until it cracks and shrinks. Water escapes at the curb and wicks into adjacent stucco or the slab edge. We pull the old seals, clean the channels properly, and reset with dust-rated silicone and fresh Mr-Glass sweeps so the enclosure actually holds water again.
- Out-of-square rough openings causing misaligned panels. Cathedral City’s 1960s-80s stucco-on-slab tract homes were rarely framed to tight tolerance. A Mr-Glass frameless panel that drops cleanly into a newer Date Palm/Highway 111 infill build often needs custom-cut glass and shimmed hinges in a 1970s east-side tract. We measure corner to corner before we ever order a panel.
- Stress cracks near handle cutouts. When a panel is forced into an out-of-square opening, the stress concentrates at the handle cutout and eventually fractures. We’ve pulled enough cracked panels in ZIP 92234 to know the warning signs: uneven gaps at the walls, a door that drifts, or a handle that suddenly feels tight.
Mr-Glass Service in Cathedral City: What Local Conditions Mean for Your Equipment
Here’s the Cathedral City specific insight most glass companies won’t tell you. The older east-side tract homes in ZIP 92234 were built with the valley’s windblown-sand and dust-storm cycle in mind for roofing and stucco, but their bathroom rough openings were never framed square to tight tolerance. A Mr-Glass frameless panel that drops cleanly into a newer build along the Date Palm/Highway 111 corridor often needs custom-cut glass and shimmed hinges in a 1970s east-side tract. That’s not a flaw in the glass. It’s the structure around it. We were called to a 1970s stucco-on-slab tract home off Date Palm Drive in ZIP 92234 where a Mr-Glass frameless pivot enclosure had sagged until the door dragged the curb and the sweep gasket was crumbling from years of UV and hard water. Our crew pulled the unit, found the rough opening out of square by nearly half an inch, re-set the tile curb, shimmed and re-hung the original glass on new Mr-Glass hinges and seals, and sealed it with a dust-rated silicone. No full replacement needed. That’s the difference between knowing glass and knowing Cathedral City construction.
Mr-Glass Models & Products We Service in Cathedral City
We work on Mr-Glass frameless pivot shower doors, semi-frameless bypass sliding enclosures, neo-angle corner units, and tempered glass tub-to-shower conversion panels. When an enclosure frame is sound, we source genuine Mr-Glass replacement hinges, sweeps, seals, and handles. When a match isn’t available or the original unit is beyond economical repair, we’ll spec a quality aftermarket or fully custom glass panel, and we’ll tell you which way we’re leaning before you spend a dollar. Our honest stance: reseal and re-hinge a solid Mr-Glass unit before recommending replacement. We only push a full swap when the glass is etched beyond restoration or the rough opening itself is failing. For Cathedral City turnaround, we keep common hinge and seal profiles on hand and order panels from suppliers we’ve used for years, sized from our own field measurements, not a homeowner’s tape.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Cathedral City
| Service | Typical Range in Cathedral City |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
The biggest cost driver is whether the rough opening needs correction before glass goes in, and that’s something we measure and quote before ordering anything. Your free estimate includes a site visit, a square check on the opening, and a written line-item scope so you see exactly what you’re paying for. Call (844) 384-3361 and we’ll schedule it.
Serving Cathedral City, CA — Our Local Coverage Area
We’re based in Cathedral City, CA and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Cathedral City
Yes, when the frame and curb are sound we replace only the etched or sand-scoured glass panel, with the enclosure left in place and the surrounding tile undisturbed. If the frame is corroded or the curb is failing, we’ll show you exactly what we’re seeing before we recommend anything more. Call (844) 384-3361 for a free site visit and exact quote.
The most common cause in Cathedral City is hinge sag driven by heat cycling. Aluminum framing expands and contracts through our 105°F-plus summers, and over time the hinge screws loosen and the door drops. In older east-side tract homes, an out-of-square rough opening makes it worse, because the panel was never seated true to begin with. We re-set the hinges, correct the panel alignment, and check the opening before calling it fixed.
Yes, it’s one of the best value remodels we do in Cathedral City, especially in the ZIP 92234 tract homes where original tub alcoves are tight and dated. Our Mr-Glass tempered glass tub-to-shower conversion panel opens up the visual space and gives you a walk-in entry, and we handle the waterproofing, drain work, and curb framing so the glass has a square, solid seat. Most Cathedral City tub-to-shower conversions run $3,500 to $10,000 depending on substrate and finish choices. Call (844) 384-3361 and we’ll measure your alcove and give you a fixed quote.
Yes, when the frame is sound we source genuine Mr-Glass service in Palm Springs replacement hinges, sweeps, seals, and handles. When a match isn’t available or the unit is beyond economical repair, we’ll spec a quality aftermarket or custom panel and tell you the difference in cost and longevity before you choose. You’ll always know whether it’s OEM or aftermarket, and nobody at Workshop Contractors is paid to push a new enclosure over a repair. Call (844) 384-3361 with your model details and we can give you a firm answer on parts.
Blowing sand scours the exterior glass face and works into sweeps and seals, so a brand-new enclosure using our Palm Desert Mr-Glass service starts accumulating micro-abrasion and grime from week one. We use dust-rated silicone and quality sweep gaskets sized for the panel, and we can spec glass with a protective coating that sheds minerals and dust better than untreated tempered glass. The goal isn’t to make it dust-proof, it’s to make it cleanable and leak-free for years under valley conditions.
Service Areas Near Cathedral City
We handle Mr-Glass service throughout Cathedral City, including ZIP codes 92234 and 92235, and in the surrounding Coachella Valley. Our crews also cover Mr-Glass service in Thousand Palms to the east, Mr-Glass service in Rancho Mirage to the west, plus Palm Springs, Palm Desert, Desert Hot Springs, and Indio. Wherever you are in the valley, the same crew, the same eye for heat-and-dust details, the same written quote.
Book Your Mr-Glass Service in Cathedral City Today
If your Mr-Glass enclosure is dragging, leaking, or clouded over, don’t wait for the next dust storm to make it worse. Call (844) 384-3361 and we’ll schedule a free estimate. For emergency hinge failures and dangerous glass cracks, we can often dispatch the same day. One contractor. Every trade. Call and we’ll sort it out.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Cathedral City and the Coachella Valley. Build it right the first time. The second time costs twice as much and nobody’s happy about it.