Mr-Glass Construction in Fontana, CA

Mr-Glass Construction in Fontana, CA | Workshop Contractors

We provide independent Mr-Glass shower enclosure installation, repair, and tub-to-shower conversion service across Fontana and nearby communities like Mr-Glass service in Bloomington, with crews working both the older 92335 tract homes south of Foothill and the newer foothill subdivisions in 92336 and 92337. What separates us from a generic parts shop is that we actually know how Mr-Glass hardware behaves in this city’s 100°F-plus summers and on its expansive clay soils, because we’ve templated and repaired enclosures here for years. We are not a Mr-Glass-authorized dealer, not manufacturer-affiliated, and we’ll tell you straight when a hinge or roller needs replacing versus when the whole panel has to go. Call (844) 384-3361 for a free estimate, and we’ll come look at the shower before you spend a dollar.

Call (844) 384-3361

Why Fontana Residents Choose Us for Mr-Glass Service

Most glass shops in the Inland Empire can hang a shower door. Far fewer can look at a binding Mr-Glass semi-frameless slider in a 30-year-old Fontana tract home and know within three minutes whether the problem is the rollers, the sweep, or the slab under your bathroom. That’s the difference between a parts-swap and an actual fix.

We’ve spent years working on Mr-Glass frameless hinged enclosures, semi-frameless sliders, neo-angle corner units, and tub-to-shower panels across Fontana, and we’ve learned the brand’s hardware inside the house and out. Our owner, Noel Figueroa, grew up over in Ontario’s Vineyard neighborhood and learned framing at Chaffey College, and we also offer Glen Avon Mr-Glass service, so when a shower opening has shifted out of square, he traces it back to the framing or the slab, not just the glass. We stock genuine Mr-Glass hardware where it’s still produced and keep a solid selection of quality aftermarket rollers, hinges, sweeps, and seals locally for fast Fontana turnaround when OEM parts are discontinued. That means you’re not waiting three weeks on a backorder while your bathroom stays out of commission.

Common Mr-Glass Construction Problems We Solve in Fontana

• Sagging or seized semi-frameless sliders. Fontana’s summer heat over 100°F expands the aluminum frames on Mr-Glass sliders and dries out the nylon rollers inside the track. The door starts dragging, then binds, then stops moving at all. We replace the rollers with oversized-bearing aftermarket units that hold up better in sustained high heat than the original nylon wheels. This is our most common call in the 92335 tract stock where original 1980s and 1990s enclosures are finally wearing out.
• Dried and cracked silicone sweeps and seals. The hot, dry Inland Empire air is brutal on Mr-Glass door sweeps. They lose their flexibility, crack along the bottom, and then water wicks under the curb and into the framing or the subfloor. In south Fontana’s older mid-century homes, that water intrusion sits against framing that’s already had decades to settle. We replace the sweep, re-seal the curb, and check that the weep holes are still moving water out instead of into the wall cavity.
• Frameless panels out of square from slab movement. Fontana sits on expansive clay soils, and older 92335 homes especially show slab settlement. When the slab under a bathroom shifts even a quarter inch over twenty years, a frameless Mr-Glass hinged panel starts catching at the top or leaving a gap at the bottom. Shimming, re-plumbing the panel against the wall, or machining the hinge is usually a one-visit fix, but we’ll always check whether the opening itself has moved beyond what the hardware can correct before we quote it.
• Hard water etching and cloudiness on frameless glass. Older 92335 homes have decades-old plumbing and harder water than many newer builds. Over time, silica and calcium build up on Mr-Glass frameless panels and etch the surface permanently. If the etching is surface-level, a professional glass treatment can restore clarity. If it’s pitted, replacement is the honest answer. We’ll tell you which one it is, not sell you a polish that won’t last.
• Neo-angle corner unit leaks at the joint. Mr-Glass neo-angle corner showers rely on precise wall and curb angles to seal correctly. In Fontana’s newer 92336/92337 foothill subdivisions, the framing is usually truer, but the faster construction pace of tract building sometimes leaves corners that aren’t square from day one. We re-template the opening, reset the glass, and use a full-length silicone bond that actually holds.

Mr-Glass Service in Fontana: What Local Conditions Mean for Your Equipment

Fontana’s buildout splits between two very different housing stocks, and that split shapes every Mr-Glass repair we do. South of Foothill, in the older 92335 core, we’re usually working on mid-century tract and post-war homes whose bathrooms have settled into openings that are no longer square, where frameless panels bind and sliders drag no matter how good the original install was. North of the 210, in the 1990s and 2000s master-planned subdivisions around 92336 and 92337 near the foothills, the framing is newer and the openings are usually within tolerance, but the expansive clay under those slabs moves with Fontana’s wet winters and blistering summers, and we see racked enclosures there too. The same week our crew templates a settled, out-of-square shower in an aging south-Fontana bath and a near-stock opening in a newer north-side foothill tract, we’re dealing with two different tolerances no single neighboring city hands us. Add the Santa Ana wind corridors by the Cajon Pass and summer high heat that forces early-morning work schedules, and you start to understand why a Fontana contractor who does Mr-Glass work day in and day out sees failure patterns a coastal shop simply never encounters.

Mr-Glass Models & Products We Service in Fontana

We work across the full range of Mr-Glass sales & service product lines: frameless hinged shower enclosures, semi-frameless sliding shower doors, neo-angle corner shower units, and tub-to-shower conversion panels and doors. Our parts approach is built around the fact that Mr-Glass glass itself is usually still good long after the moving hardware has failed. So we use genuine Mr-Glass hinges, rollers, clamps, and sweeps where the manufacturer still offers them, and we spec quality aftermarket replacements, often with better bearing designs, when the OEM part is discontinued or six weeks out on backorder. We keep fast-moving parts stocked for Fontana jobs so most repairs happen in a single visit. We repair the glass and frame when they’re sound, and we tell you plainly when a panel is chipped, out of square beyond shimming, or the seal channel is failing and replacement is the honest call.

Mr-Glass Service Pricing in Fontana

FAQs – Mr-Glass Construction in Fontana

Can you replace just the hardware on my Mr-Glass shower door instead of the whole enclosure? Yes, and it’s usually the right fix when the glass and frame are sound and only the rollers, hinges, sweeps, or seals have failed. We replace with genuine Mr-Glass hardware where available and quality aftermarket parts when the OEM is discontinued. Call (844) 384-3361 and we’ll tell you which situation you’re in during the free estimate.

Why does my Mr-Glass shower door stick and leak more in the summer? Because Fontana’s heat over 100°F expands the aluminum frame and dries out the nylon rollers and silicone sweeps, so a door that slides fine in May can bind and leak by August. It’s a material-expansion problem, not a cleaning problem. We swap in better-bearing rollers and fresh sweeps rated for sustained high heat, which is the actual fix.

My frameless enclosure in my 92335 home won’t close squarely – what’s going on? Usually, the opening has moved. A 30 to 60-year-old south Fontana tract home on expansive clay has settled enough to push the shower opening a fraction out of square, and the frameless panel binds because the glass is flatter than the wall it’s mounted to. We re-plumb the panel, shim the hinges, and check the curb before recommending anything heavier.

Do you handle a tub-to-shower conversion with a new Mr-Glass enclosure? Yes. We do the full tub removal, the waterproofing and pan work, and then install a new Mr-Glass tub-to-shower conversion panel or custom frameless enclosure. Fontana has thousands of original alcove tubs in the 92335 tract stock, and the conversion makes sense in lots of those 5-foot openings. Call (844) 384-3361 for a free estimate and we’ll measure the actual bay and give you a written price.

How fast can you get a replacement Mr-Glass panel or hardware in Fontana? For common hardware, we keep stock locally and can usually schedule within a few days. For full replacement glass, templating is the longer step, and most Fontana jobs turn around in one to two weeks once we have the opening dialed. Call (844) 384-3361 and we’ll give you an honest timeline for your specific model.

Service Areas Near Fontana

We cover all Fontana ZIPs including 92335, 92336, 92337, and 92331, and we also handle Mr-Glass work in Woodcrest, Loma Linda, Orange, Anaheim, and North Tustin. For the full service footprint, see our Fontana service area page. Neighbors in the nearby foothills can reach our Mr-Glass service in Sunnyslope, and Mr-Glass service in Corona is where we cover the west end.

Book Your Mr-Glass Service in Fontana Today

If your Mr-Glass shower is binding, leaking, or just looks tired, call (844) 384-3361. We’ll get a tech to your Fontana home or to Pedley Mr-Glass service calls, tell you honestly what’s wrong, and quote the repair or replacement before any work starts. Estimates are free, and most hardware repairs are done in one visit.

Written by Noel Figueroa, Owner at Workshop Contractors, serving Fontana since 2005. Build it right the first time. The second time costs twice as much and nobody’s happy about it.