Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Irvine, CA | Workshop Contractors
We provide independent Mr-Glass service across Irvine, and the one thing that makes our work here different is simple: we know the village design-review process that every HOA in this city enforces. Replacing a Mr-Glass shower enclosure in Irvine isn’t just a glass job; it’s a paperwork job, a finish-matching job, and a get-it-past-the-architectural-committee job. We handle all three. Call (844) 384-3361 to schedule your free estimate.
Why Irvine Residents Choose Us for Mr-Glass Service
We’ve installed and serviced Mr-Glass frameless enclosures, semi-frameless sliders, custom mirrors, and glass shelving across Irvine’s tract villages and the newer multi-family builds around the Spectrum and Great Park for years, plus Mr-Glass repair in Aliso Viejo. That hands-on time with the product line means we know how the proprietary hinges wear, which seal configurations leak first, and which finishes hold up against Irvine’s hard water. We are independent specialists, not a Mr-Glass authorized dealer, so we have no incentive to push a full replacement when a hinge rebuild will do. Noel Figueroa, our owner and general contractor, learned finish work the old way: framing that’s square, tile that lines up at the grout joint, trim that actually meets the corner. Build it right the first time. The second time costs twice as much and nobody’s happy about it. That’s the standard we bring to every Mr-Glass service call in Irvine.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Irvine
- Hinge sag and door misalignment in frameless enclosures. Irvine sits on expansive clay soils in many of the older villages, especially Northwood and Woodbridge. Minor wall shifts over time pull the door out of plumb, which puts glass-to-wall contact stress on the hinge side. We realign the door, replace worn hinge pins or full hinge assemblies, and solve the chipping risk before it becomes a cracked panel.
- Hard water etching and mineral staining on Mr-Glass shower doors. Irvine’s water supply carries enough dissolved minerals to leave visible buildup on unprotected glass within months. If the original enclosure didn’t get a protective coating, we recommend a deep-clean restoration and a new coating application, or a glass replacement if the etching has gone too deep to restore clarity.
- Bottom sweep and wall jamb seal failure on semi-frameless sliders. Santa Ana wind events in the fall drive dust and fine grit into slider tracks, which accelerates wear on the bottom sweep and the vertical wall jambs. We replace those seals with OEM-spec or better aftermarket equivalents and adjust the track alignment so the door closes tight against the jamb.
- Corroded clamps and hinges in coastal-influenced Irvine areas. The air around the Spectrum, Great Park, and neighborhoods closer to the 405 carries more marine salt than people expect. Combine that with hard-water mineral deposits and frequent cleaning with harsh chemicals, and you get pitted, corroded hardware that eventually seizes or cracks. We replace with OEM-style finished hardware that matches the HOA-approved palette.
- Mirror wrap delamination and edge discoloration. Irvine bathroom vanities see significant humidity swings, especially in older tract homes with undersized vent fans. Mr-Glass mirror wraps that weren’t sealed properly at the edges start to blacken at the silver backing. We remove and replace with properly edge-sealed units sized to the existing vanity.
Mr-Glass Service in Irvine: What Local Conditions Mean for Your Equipment
Here’s the thing most Irvine homeowners don’t realize until they’re already into a glass project: every village in this city has its own architectural palette, and the Irvine Company plus the HOA design-review board enforce it down to the hinge finish. In Northwood, a brushed-nickel hinge might sail through review while an oil-rubbed bronze one gets rejected outright. In Turtle Rock, the glass thickness and edge profile for a shower enclosure may need to match the original build spec from the 1970s. That means when we order Mr-Glass components for an Irvine job, we verify approved finishes before we place the order, not after. We file the design-review paperwork, attend the committee meeting if one’s needed, and make sure the glass style, edge work, and hardware finish all match what the village already approved. That’s a step most glass companies skip, and it’s why we get called back to fix jobs where the enclosure is beautiful but the HOA won’t sign off. Irvine is a master-planned city, and the planning didn’t stop in 1970; it runs through every permit and every finish approval today.
Mr-Glass Models & Products We Service in Irvine
We work on the full Mr-Glass residential line: frameless shower enclosures in 3/8-inch and 1/2-inch tempered glass with the proprietary hinge sets, semi-frameless sliding shower doors, custom vanity mirrors and mirror wraps, and glass shelving with Mr-Glass hardware. For current models, we source OEM Mr-Glass hinges, handles, seals, and clamps to preserve the original fit and finish. For older or discontinued Mr-Glass lines, we use high-quality aftermarket equivalents that meet or exceed the original specs so you don’t get stuck waiting on a part that’s no longer manufactured. We keep common hinge pin sizes, seal profiles, and clamp finishes in our local inventory so Irvine turnaround doesn’t stall on a two-week parts order. If the glass itself is chipped or the frame is structurally compromised, we’ll tell you straight: replacement is safer and cheaper over time than chasing a failing enclosure. Our Mr-Glass sales & service experience covers everything from single hinge replacements to full walk-in conversions.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Irvine
What drives the cost on a Mr-Glass job in Irvine? Glass thickness, enclosure size, hardware finish (some HOA-approved finishes are special-order), whether we’re working with an existing pan or building a new one, and whether the village design review requires additional documentation. A free estimate with us includes the site measurement, a hardware and seal inspection, a written line-item quote, and a clear explanation of what the HOA process will require. Here are the ranges for the three Mr-Glass services we handle most in Irvine:
| Service | Typical Range |
|---|---|
| Frameless Glass Shower Enclosure Installation | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
Call (844) 384-3361 for an exact quote on your Mr-Glass service in Irvine. Estimates are free, and we’ll walk you through every line item before you commit.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and also provide Mr-Glass in Tustin, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Irvine
In most Irvine villages, yes. The city’s centralized development standards require design-review approval for visible exterior and interior changes, and many village CC&Rs extend that to bathroom fixture and finish changes, especially in condos and attached townhomes. In Northwood (ZIP 92620), we’ve filed design-review paperwork for frameless shower replacements where the hinge finish had to match the original 1980s brushed nickel exactly. We handle the paperwork and committee submissions as part of your estimate. Call (844) 384-3361 and we’ll tell you what your specific village requires.
Most bottom leaks on Mr-Glass semi-frameless sliders are repairable. The bottom sweep wears out, or the track gets grit in it from Santa Ana dust, and the seal stops making contact with the threshold. We replace the sweep, clean the track, and realign the door. If the frame itself is warped or the glass is chipped at the bottom edge, then replacement is the honest call. We’ll show you exactly what we found and why we’re recommending what we’re recommending. Call (844) 384-3361 to schedule an inspection.
Irvine’s moderately hard water leaves mineral deposits on unprotected glass, which start as cloudy film and progress to permanent etching if left untreated for a year or more. The worst damage we see is on shower doors that never got a protective coating from the factory, or where the coating wore off and the homeowner kept using abrasive cleaners. We can restore many enclosures with a deep-clean and reseal. If the etching is deep, we recommend replacing the glass with a coated panel that’s sized to your existing Mr-Glass hardware. Call (844) 384-3361 for a free glass assessment.
Yes. We match OEM Mr-Glass hinge finishes including brushed nickel, chrome, matte black, and oil-rubbed bronze, and we verify the finish against your village’s design-review approval before ordering. For discontinued finishes, we source aftermarket hardware that’s visually and dimensionally identical so the enclosure looks factory-consistent. This matters in Irvine, where a mismatched hinge will get flagged at resale inspection. Call (844) 384-3361 and we’ll check what’s on your enclosure today.
For a standard frameless or semi-frameless enclosure replacement, the physical installation is typically a one-day job once the glass and hardware are on site. The variable in Irvine is the design-review window, which can add anywhere from a few days to a few weeks depending on the village and whether the committee meets monthly. In the Northwood village, we replaced a failing Mr-Glass frameless enclosure in a 1980s tract home where the original hinges had corroded and the glass was chipped from years of hard-water etching; we also offer North Tustin Mr-Glass service. We sourced OEM-style brushed-nickel hinges that matched the HOA-approved finish, installed new 3/8-inch tempered glass with a protective coating, and realigned the door for smooth operation. The homeowner got the paperwork handled and the installation done in one day once approval cleared. Call (844) 384-3361 to get started on your timeline.
Service Areas Near Irvine
We serve Irvine and the surrounding Orange County communities including Irvine service area, Tustin, North Tustin, Orange, and Anaheim, plus our Mr-Glass service extends to Mr-Glass service in Westminster and Mr-Glass service in Rancho Santa Margarita for homeowners in those neighboring markets who need the same village-aware, finish-matched glass work.
Book Your Mr-Glass Service in Irvine Today
Call (844) 384-3361 now to schedule your free Mr-Glass estimate in Irvine. We’ll assess your enclosure, identify the failure mode, and give you a written line-item quote that accounts for your village’s design-review requirements. Independent service, real Mr-Glass experience, and one number to call.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Irvine and Orange County.