Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Chino, CA | Workshop Contractors
We provide independent PGT window and door installation, repair, and replacement across Chino’s 91708 and 91710 ZIP codes. What separates our PGT work here is simple: we’ve spent years pulling original dairy-era units and builder-grade tract windows out of Chino walls, so we know how these specific frames age under local heat, Santa Ana wind, and the permitting mess that older Chino homes often carry. If you’re planning PGT work in Chino, call (844) 384-3361 for a free estimate. Need the full PGT sales & service picture first? That page covers everything we do with the brand.
Why Chino Residents Choose Us for PGT Service
We’re an independent contractor. We don’t manufacture PGT units, we don’t represent the factory, and we don’t get paid to push a warranty line one way or the other. What we bring is field knowledge: we’ve reframed out-of-square openings on 91710 ranch homes, pulled original Series 2300 sliders out of 91708 tract houses, and set WinGuard impact units into additions that had to survive Chino’s summer glare. When Noel Figueroa walks a Chino job, he’s looking at the wall behind the window, not just the glass in front of it. That’s the difference between a swap and a fix that holds.
We also carry the full general-contracting scope behind the window work. PGT units don’t live alone. They sit in walls that may need reframing, under eaves that may need flashing, above sills that may need waterproofing. When your PGT replacement is part of a bigger remodel, we handle the framing, the drywall, the stucco, and the finish work without handing you off to a second crew. One contract. One schedule.
Styles & brands we work with
Common PGT Construction Problems We Solve in Chino
- Vinyl sash corners cracking on south- and west-facing WinGuard units. Chino summers push past 100°F, and thermal cycling between those afternoons and cold winter mornings slowly splits vinyl corners. We see it most on elevations with no shade. If the sash is intact we replace the component; if the corners are gone, the unit is done.
- Builder-grade PGT sliders dragging and leaking air in 91708 tract homes. The original Series 2300 and 2400 rollers flatten and the weatherstrip hardens over a decade and a half of Chino dust and heat. The door starts dragging, then gaps at the stile. We replace rollers, tracks, and seals so the slider moves like it did on day one.
- Fogged glass on older PGT insulated units. When the desiccant inside the glazing gives out, the pane hazes from the inside and no amount of cleaning fixes it. This happens faster here because the constant heat cooks the seal. We replace the glazing package and reseal, restoring the unit’s thermal and impact performance.
- PGT units set into out-of-square openings on 1950s-70s ranch homes. On the original 91710 stucco-over-wood-frame stock, anything built before the unit went in was probably framed by hand, not by laser. The sills sag, the sides lean, and the new PGT frame won’t seat without a fight. We reframe and flash the rough opening before the unit goes in.
- Unpermitted patio enclosure windows that won’t pass inspection. We’ll get into this more below, but the short version: a lot of Chino’s dairy-era additions were never pulled. A legal PGT window in an illegal wall still needs correction first.
PGT Service in Chino: What Local Conditions Mean for Your Equipment
Chino is two different construction worlds sharing one city limit, and PGT work looks different on each side. The 91710 core is 1950s-70s ranch and tract stock: stucco over wood frame, shallow slab foundations, and a good number of unpermitted patio enclosures and garage conversions that went up during the dairy-boom years. We’ve handled similar PGT repair in Ontario properties with the same vintage. We regularly find PGT windows and sliders set into walls that were never permitted. Before we order a single unit, we reconcile the opening against Chino building department records, because a legal window in an illegal wall still has to be corrected first. On the 91708 side, you’re looking at newer master-planned tract homes and industrial-flex buildings: code-current framing, modern setbacks, and PGT units that were factory-installed or builder-specified. That work is less about correcting old framing and more about matching original series and keeping the warranty profile intact. Contractors who treat Chino as one housing stock usually miss one side or the other. We don’t.
PGT Models & Products We Service in Chino
We service the full residential PGT line you’ll actually find in Chino: WinGuard vinyl impact windows and sliders, WinGuard Aluminum impact units, Series 2300/2400 vinyl single-hungs and sliders common on late-1990s and 2000s 91708 tract builds, and the older PGT aluminum single-hung and sliding units found on 91710 ranch retrofits. Where PGT OEM sash, rollers, weatherstrip, and glazing components are still available, we use them so the unit keeps its original profile and impact rating. This matches our standard for PGT in Montclair jobs as well. For discontinued series, we go to quality aftermarket hardware that matches the original geometry. If the frame and rough opening are sound, we repair. If the vinyl is cracked at the corners or the wall has moved, we’ll tell you honestly that replacement is the cheaper long-run call.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Chino
PGT work in Chino spans a wide range because the scope depends on what’s behind the window. Here’s what we typically see:
| Service | Typical Range in Chino |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition (with PGT openings) | $45,000 – $130,000 |
The spread comes down to the same split we keep talking about: a straight sash replacement on a 91708 tract home costs far less than reframing a 1970s patio enclosure in 91710 before the new WinGuard slider goes in. Reframing, flashing, stucco patching, and permit reconciliation all move the number. Our free estimate breaks the quote into line items so you can see exactly where the money goes. Call (844) 384-3361 to schedule one.
Serving Chino, CA — Our Local Coverage Area
We’re based in the Chino area and know this community well, and we also provide PGT repair in Los Serranos. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Chino
Yes, as long as the frame and rough opening are sound. We replace PGT OEM sash, glazing packages, rollers, and weatherstrip where they’re still available, which keeps the original impact rating and profile intact. If the vinyl frame has cracked at the corners or the rough opening has moved, a component repair won’t hold and you’re better off replacing the unit. Call (844) 384-3361 and we’ll tell you which path makes sense before any work is ordered.
It might, and we address it before ordering anything. A lot of the 91710 core’s dairy-era patio enclosures and garage conversions were never permitted, which means a legal PGT window set into that wall still requires reconciling the wall itself with Chino building department records. We pull the records, correct what needs correcting, and only then set the new unit. It sounds like a headache, but it’s the difference between a window that passes inspection and one that doesn’t.
Yes, when they’re installed with the right flashing and glazing for the elevation. Chino’s south- and west-facing walls take brutal afternoon heat, and vinyl expands and contracts through every thermal cycle. PGT’s vinyl systems are engineered for that load, but the install matters as much as the glass: we flash the sill for winter rain, seal the rough opening for air, and make sure the unit sits square so the weatherstrip does its job. A good PGT window installed badly still leaks.
Yes. This is where our general-contracting scope helps: when a kitchen remodel or home addition in Chino includes new PGT windows or sliders, we handle the framing, the drywall, the stucco, and the finish work as one integrated job. You’re not coordinating a window crew, a framing crew, and a drywall crew. One contract covers the opening, the unit, and everything around it. Call (844) 384-3361 to scope the full project.
Yes, in most cases. If the original unit is a Series 2300 or 2400, we match the profile, the glass package, and the finish so the replacement doesn’t stand out from its neighbors. If the series has been discontinued, we’ll show you the closest current PGT match and explain the visual differences before you commit. For an exact quote on your specific elevations, call (844) 384-3361 – estimates are free.
Service Areas Near Chino
We handle PGT service throughout Chino service area neighborhoods and the surrounding cities. If you’re in Woodcrest, Anaheim, North Tustin, Orange, Loma Linda, or Buena Park, we cover those too. Also see PGT service in Rancho Cucamonga and PGT service in Claremont for neighboring coverage details.
Book Your PGT Service in Chino Today
Ready to get the window or door fixed right? Call (844) 384-3361 to schedule your free estimate. We’ll walk the openings, check the wall behind the unit, and give you a line-item quote before any work starts. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Chino and the Inland Empire.