Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Montara, CA | Workshop Contractors
We provide independent PGT window, door, and impact-unit installation and repair across Montara, from the lower village flats to the hillside lots climbing toward Montara Mountain. What makes our PGT work different here is that we’ve spent years watching how these units actually perform against salt fog, wind-driven rain, and seasonal hillside movement on this specific stretch of coast. Call (844) 384-3361 for a free estimate on any PGT service in the 94037 ZIP.
Why Montara Residents Choose Us for PGT Service
This is not our first time working on a PGT unit that’s been fighting the Pacific for ten winters. We know these products because we’ve installed and serviced Moss Beach PGT service on WinGuard impact windows, aluminum sliders, and vinyl double-hungs in homes where ocean-facing walls take direct storm hits. Noel Figueroa, our owner and general contractor, started framing houses before he could rent a truck, and he’s spent decades since learning that the difference on a coastal job is never the brand name on the glass, it’s how the rough opening was prepped and flashed behind it. We’re an independent contractor, not a manufacturer-authorized dealer, so our recommendation is based on what’s actually failing on your wall, not what a factory rep needs to move this quarter. We source genuine PGT replacement sashes, rollers, hinges, and weatherstrip when a unit is recent enough to keep, and we spec quality aftermarket insulated glass and hardware when a PGT line is discontinued but the frame is still square. Montara homeowners call us because we give them a straight answer about whether to repair or replace, and every estimate includes the site conditions we saw, not just a unit price.
Styles & brands we work with
Common PGT Construction Problems We Solve in Montara
Here’s what we see most often on PGT products installed along this stretch of coast:
- Track and roller corrosion on PGT sliding glass doors. Salt-laden fog gets into the track channel on ocean-facing walls, and the stainless or galvanized rollers start grinding within a few seasons. On a home below Montara Mountain, that fog sits in the marine layer for hours every morning and never really dries out. We pull the panel, clean or replace the rollers, and re-align the track so the door doesn’t feel like you’re dragging gravel every time it moves.
- Racked frames on PGT windows in hillside homes. Steep-lot houses on pier-and-post or stepped foundations flex seasonally as the hillside expands and contracts with winter rain. PGT vinyl and aluminum frames pick up that movement, sashes start binding, and corner seals pull open or corner welds crack. Shimming the sash buys a few months, but on a Montara slope a distorted frame usually wants full-frame replacement with the rough opening squared and reframed.
- Sill-pan and flashing failures on PGT patio doors during winter storms. Wind-driven rain off the Pacific doesn’t fall down, it hits sideways and runs upward at the sill. If the original install never accounted for a windward hillside wall, water tracks right under the PGT threshold and into the subfloor. We reframe, re-flash, and install a proper sill pan with end dams and drainage to the exterior.
- Fogged insulated glass in older PGT vinyl units in the lower village cottages. Those beach bungalows on the flats go through cold-fog-to-sun thermal swings all year, and the original insulating gas panels eventually lose their seal. Condensation between the panes means the glazing is dead, and on older PGT units a sash replacement often isn’t available, so we spec quality aftermarket IGUs and rebuild the sash seal.
- Corner weld failures on builder-grade PGT vinyl windows. Years of thermal cycling plus the moisture load from fog and rain breaks down the corners on older vinyl frames in Montara’s original housing stock. We don’t patch these, because a broken weld on a vinyl frame is a structural failure. We replace the unit full-frame, which lets us square the opening and re-flash at the same time.
PGT Service in Montara: What Local Conditions Mean for Your Equipment
Nearly all Montara construction is permitted through San Mateo County rather than a city building department, and that changes how a PGT replacement actually happens. If you’re altering a wall opening on a hillside home, the county pulls in coastal geotechnical review, which means your new window or patio door can hinge on having slope and drainage documentation in order, not just a spec sheet and a bid. This is genuinely different from what a crew in neighboring Pacifica or Half Moon Bay faces on the same terms, because Montara’s lots sit directly against the Devil’s Slide-adjacent terrain in unincorporated county jurisdiction with slide-prone soils. A PGT patio door replacement on a flat lot is a two-day window job. In Montara, it can mean a soils conversation, a drainage plan, and a county inspector who wants to see how the rough opening adapts to a wall that moves. We’ve handled enough of these to know what the county asks for, and we won’t let you find out at the permit counter.
A few years back we got called out to a stepped-foundation home climbing toward Montara Mountain. The PGT sliding glass door on the ocean-facing wall was binding and leaking at the sill during the first big winter storm, and the hillside wall had settled just enough to rack the vinyl frame out of square. We pulled the unit, reframed and re-flashed the rough opening, and set a new PGT WinGuard slider with a proper sill pan and drainage detailing before the next storm cycle hit. That’s the kind of repair a generic glass shop isn’t set up to do, and it’s the reason we frame our PGT work as construction, not just window service.
See our PGT sales & service page for the full range of products we install and support, including impact-rated lines.
PGT Models & Products We Service in Montara
We work on the full PGT lineup that’s common on Montara homes: PGT WinGuard impact-resistant windows and sliding glass doors for storm-exposed ocean walls, PGT Aluminum Series units on decks and larger openings, PGT Vinyl Series double-hungs and casements in the older beach cottages, and EnergyVue thermally improved insulating glass where fog and sun are pushing the thermal load. On recent PGT units we use genuine OEM replacement sashes, rollers, hinges, and weatherstrip. When a PGT line is discontinued or the frame is sound but the glazing has failed, we source quality aftermarket insulated glass and hardware that matches the unit spec. We keep common PGT hardware and weatherstrip on hand for the models we see most often in Montara, which means fewer second trips and less time with a tarp over your opening.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Montara
We price PGT work on Montara homes by the actual conditions, not by a flat rate card. Heavy prep labor, reframing, hill access, and coastal flashing details all affect the final number, and we’d rather quote you honestly up front than discover on day two that the rough opening needs to be rebuilt. Here’s where the common PGT jobs land:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Every estimate includes a site walk, measurement, a written line-item breakdown, and our read on whether your PGT unit is worth repairing or should be replaced full-frame. Call (844) 384-3361 and we’ll schedule your free estimate.
Serving Montara, CA — Our Local Coverage Area
We’re based in the Montara area and know this community well, and we also handle PGT in El Granada. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Montara
Yes, most PGT replacements in Montara require a San Mateo County permit, especially when the rough opening size changes or the home sits on a hillside lot subject to coastal geotechnical review. We handle the permit application and documentation as part of our scope on permitted work, and we’ll tell you up front if your job falls under the county’s slope or drainage review. Call (844) 384-3361 and we’ll walk your specific project through the requirements.
Hillside homes on pier-and-post or stepped foundations flex seasonally as the ground soaks up winter rain and dries in summer, and that movement racks window and door frames out of square, which causes sashes to bind and corner seals to pull open. On a flat lot, PGT units mostly wear from exposure; on a Montara slope, they wear from structural movement. We account for that when we frame and flash the opening, because a unit set square on a moving wall will fail early.
Yes, salt-laden fog is the biggest non-storm killer of PGT hardware on Montara’s ocean-facing walls, corroding hinges, rollers, and fasteners far faster than inland exposure. Aluminum and vinyl frames themselves hold up reasonably well, but the moving parts and mounting hardware need regular cleaning and occasional replacement to keep operating. We recommend annual track and hardware cleaning on windward walls and replacement when corrosion starts to bind the rollers.
It depends on the frame condition, but on a Montara home with corner weld failures, racked walls, or flashing that’s already failed, we lean toward honest full-frame replacement rather than a sash swap. That’s because patching a distorted frame only buys a season on a hillside lot, and full-frame replacement lets us square the opening, re-flash it properly, and give you a unit that won’t leak in the next winter storm. Call (844) 384-3361 and we’ll inspect the frame and tell you which route actually makes sense.
Winter storm-driven rain off the Pacific hits windward hillside walls sideways and runs upward at the sill, so a PGT patio door needs a sill pan with end dams, proper flashing tape, and drainage to the exterior, plus a reveal at the rough opening that accounts for wall movement. Most failures we see are from original installations that treated the door like a flat-lot install. Our Montara PGT door work includes reframing, re-flashing, and drainage detailing.
Service Areas Near Montara
Workshop Contractors serves Montara and the surrounding San Mateo County coast, plus inland communities where the same coastal construction knowledge matters. We work with homeowners on PGT installation and service in Montara service area, and our crews also cover PGT service in South San Francisco and PGT service in Brisbane for clients dealing with similar fog and marine-coast conditions. Other nearby areas we support include Half Moon Bay, Pacifica, and El Granada.
Book Your PGT Service in Montara Today
Whether it’s a fogged glass panel, a racked slider, or a full impact window upgrade on an ocean-facing wall, we’ll inspect your Montara home and give you a straight answer and a written estimate. Call (844) 384-3361 and speak with Noel or our team about your PGT project.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Montara and San Mateo County. Build it right the first time. The second time costs twice as much and nobody’s happy about it.