Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Santa Cruz, CA | Workshop Contractors
We’re an independent construction and window/door crew that works on PGT products every week across Santa Cruz, from PGT service in Capitola to Seabright bungalows and Westside Victorians. We’re not a dealer or a factory-authorized shop, so our loyalty sits with getting the opening, flashing, and finish right on your home, not moving a particular product line. The thing that separates our PGT work here is simple: we read your coastal permit conditions and geotech report before we ever spec a PGT unit. Call (844) 384-3361 for a free estimate, and we’ll walk the project with you before anything gets ordered.
Why Santa Cruz Residents Choose Us for PGT Service
We handle PGT windows and doors the way a general contractor should: as part of the building, not as a part swap. Noel Figueroa, our General Contractor in Santa Cruz, learned finish work from the same generation of Inland Empire tradesmen who framed half the houses on his street in Ontario’s Vineyard neighborhood, and he’s carried that standard into every coastal job since. What that means for you is this: we don’t just set a window and caulk it. We look at how the unit ties into your siding, your flashing, your rough opening, and your permit file. In Santa Cruz, where a window replacement can sit three blocks from a creek corridor or a bluff edge, that big-picture read is the difference between a job that gets signed off and a job that stalls at planning. We stock OEM-compatible PGT sashes, rollers, glazing, and hardware for the model lines we see most, and we’ve been inside enough of these units on coastal homes to know which ones are worth repairing and which ones you’re throwing money at.
Styles & brands we work with
Common PGT Construction Problems We Solve in Santa Cruz
- Salt-air corrosion on aluminum PGT frames. On bluff-adjacent homes in Seabright and the Lower Westside, we regularly see pitting at frame corners, finish failure along the lower rail, and seized rollers on sliders. The marine layer doesn’t just sit on the glass; it works into the hardware. If the frame’s still sound, we replace rollers and hardware. If the aluminum’s losing structural integrity, we’ll tell you to stop patching and start planning a swap.
- Failed perimeter sealant and flashing on original builder-grade installations. Santa Cruz gets wind-driven winter rain that finds every gap an old bead of caulk left behind. When we pull a PGT unit and see staining or rot at the rough opening, it’s almost always a sealant failure that let moisture into the wall cavity. The fix isn’t just re-caulking; it’s proper flashing, pan, and shims before the new unit goes back in.
- Distorted vinyl WinGuard sashes from prolonged UV and thermal cycling. South- and west-facing walls in Santa Cruz take a real beating from afternoon sun and marine moisture swings. We see sticky operation, gasket shrinkage, and fogged insulating glass on vinyl PGT units that haven’t hit their expected lifespan yet. Sometimes a sash replacement gets you there; fogged dual-pane glass usually means full unit replacement.
- Slider tracks packed with sand and oxidized rollers. Living near the beach means sand ends up in every moving part. Doors that were never damaged still drag, bind, and fail to latch because the track is jammed and the rollers have given up. Some of these are straightforward roller swaps. Others, where the frame’s worn with them, push toward replacement.
- Rot and water damage found when pulling PGT units from pre-1970 beach bungalows. Much of Santa Cruz’s housing stock sits on pier-and-post foundations with no modern sill pan under windows and doors. By the time we remove an old PGT unit on a 1940s or 1950s house, the framing underneath has often been quietly soaking for decades. We reframe, flash properly, and set the new unit so the same failure doesn’t repeat.
PGT Service in Santa Cruz: What Local Conditions Mean for Your Equipment
Here’s the thing most window and door crews won’t tell you until it’s too late: on the marine-terrace lots in Seabright and the Lower Westside, the bluff-top and creek-corridor setbacks mean a window or door replacement that enlarges an opening, or any new opening tied to an addition, can pull the project into Coastal Commission review and a geotech report. The identical swap a mile inland is a simple over-the-counter permit. We know this because we’ve run both versions of the same job. On a 1940s beach bungalow in Seabright, we pulled a set of original single-pane PGT aluminum sliders whose frames had pitted and seized from salt air, and found the rough opening behind them had no sill pan and soft framing from years of wind-driven rain — the same kind of damage we see when handling PGT repair in Mount Hermon. We reframed and flashed the opening and set new PGT WinGuard units with proper pan and shims, then tied the exterior back into the siding. That work only moved forward because we checked the coastal-zoning picture before we ordered glass. If we’d treated it like a generic swap, the homeowner would have paid for windows they couldn’t legally install that season. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
PGT Models & Products We Service in Santa Cruz
We work on the full PGT line you see on Santa Cruz homes: WinGuard aluminum impact-resistant windows and sliding glass doors, WinGuard Vinyl impact windows and doors, the Architectural Series vinyl casement and single-hung windows, and the Aluminum Series including the 700 and 800 Series sliding glass doors. For units that are still serviceable, we use PGT OEM replacement sashes, glazing, rollers, and hardware. On older aluminum where OEM parts are discontinued, we use quality aftermarket rollers and weatherstrip. But we won’t chase parts on a frame that’s structurally done. Salt-corroded frames or fogged dual-pane units get a straight answer: replacement beats repair, and we’ll walk you through the cost difference before you spend anything. We also service PGT product lines across the broader PGT sales & service scope, including impact-rated units built for coastal exposure.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Santa Cruz
PGT work in Santa Cruz sits in a predictable range depending on scope. A straight window replacement runs $4,500 – $15,000. Impact window installation lands between $8,000 and $25,000 because you’re paying for structural rating, heavier glass packages, and often stiffer framing at the opening. Roof repair around PGT windows and doors, where water intrusion has worked into the wall, runs $400 – $1,800. Here’s the table we quote from:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Your final number depends on the model line, how many units you’re doing, what condition the rough openings are in, and whether the coastal permit process adds geotech or planning review time. A free estimate from us includes walking the site, reading the existing permit picture, and a written line-item quote. Call (844) 384-3361 to schedule yours.
Serving Santa Cruz, CA — Our Local Coverage Area
We’re based in the Santa Cruz area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Santa Cruz
A direct replacement in the same opening, same size, generally moves as an over-the-counter permit, even on the marine terraces. The trigger isn’t the PGT brand; it’s whether you’re enlarging the opening, changing the header, or adding a new opening. Two of those three pull you into coastal zoning review and possibly a geotech report. We verify this before ordering anything so you don’t buy units you can’t install. Call (844) 384-3361 and we’ll check your address against the current coastal zoning map.
If the frame is structurally intact, we replace the rollers, clean the track, and get the door latching again for a few hundred dollars. If the aluminum is pitting deep enough that corner welds are compromised or the lower rail is losing material, patching buys you a year at best. Fogged or failed glass tips the scale firmly toward replacement. We’ll give you the honest read and pricing for both paths before you commit. Estimates are free at (844) 384-3361.
Yes, within reason. On Victorian and Craftsman-era houses, we match frame profiles and sightlines using PGT’s Architectural Series or custom-specified WinGuard units, then trim and case the opening so the new window reads like it was always there. If your existing units are discontinued aluminum, we’ll show you current models that keep the same visual weight. Matching a 1940s bungalow’s original window look is part of the job, not an upsell. Call (844) 384-3361 and tell us what you’re working with.
Not necessarily. A one-day replacement with proper flashing and a weather-tight temporary seal can go in during the wet season in Santa Cruz, especially for like-for-like swaps. Larger projects with big openings or framing work tied to a remodel make more sense between May and October. We schedule based on what your specific opening actually requires, not a blanket rule. We’ll tell you what’s safe for your timeline when you call (844) 384-3361.
Completely different. A replacement swaps a unit in an existing opening. A new opening in an addition changes the structural load path, the siding and sheer paneling, and depending on where your lot sits relative to creek corridors or the coastal bluff, it can trigger geotech review and Coastal Commission conditions that a replacement never sees. We handle both, but we sequence the permit work first so the project doesn’t stall mid-build. Call (844) 384-3361 for a free estimate and we’ll map out the permit picture for your specific address.
Service Areas Near Santa Cruz
We run PGT service throughout Santa Cruz service area zip codes 95065, 95060, 95061, and 95062, including Seabright, the Lower Westside, Live Oak, Pleasure Point, and Capitola-adjacent streets. We also cover PGT service in Pasatiempo for hillside custom homes with coastal-view exposure, and PGT service in Scotts Valley for inland lots where thermal cycling and UV damage show up differently than on the marine terraces.
Book Your PGT Service in Santa Cruz Today
If your PGT windows or doors are pitted, dragging, fogged, or leaking, don’t wait for the rainy season to expose your framing — whether you need PGT repair in Twin Lakes or anywhere nearby. Call (844) 384-3361 to schedule a free estimate. We’ll walk the site, read the permit picture, and give you a written line-item quote for repair or replacement.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Santa Cruz since day one.