Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in Scotts Valley, CA | Workshop Contractors
We provide independent Therma-Tru entry, patio, and sidelite service across Scotts Valley, CA, and also offer Santa Cruz Therma-Tru service. What makes our Therma-Tru work different here is that we treat the door, frame, flashing, and foundation as one assembly, not a slab swap. On canyon lots where damp redwood shade meets wildfire exposure, that distinction decides whether a door lasts five years or thirty. Call (844) 384-3361 for a free estimate.
We’re Workshop Contractors, a licensed general contractor led by Noel Figueroa. We’ve installed and serviced Therma-Tru systems across the Santa Cruz Mountains canyon lots for years, including Therma-Tru repair in Ben Lomond, so we know how fiberglass slabs, rot-resistant frames, and multi-point hardware behave under Scotts Valley’s damp-winter/dry-wind swing. We’re an independent contractor, not authorized, sponsored, or endorsed by Therma-Tru, and we diagnose the door, frame, and flashing as one assembly rather than swapping a slab and walking away. That distinction matters more in Scotts Valley than almost anywhere else in the Bay Area, and we’ll explain why below.
Our Therma-Tru sales & service work covers everything from full entry replacements to weatherseal and hardware repair. We serve the entire Scotts Valley service area, including the 95066 and 95067 ZIP codes.
Why Scotts Valley Residents Choose Us for Therma-Tru Service
Most door companies know Therma-Tru. Fewer know what a Therma-Tru door does on a shaded canyon slope in Scotts Valley, where the sill sits damp for months and the frame settles with the hillside. Noel Figueroa built his career on the kind of framing and finish work that holds up under a second look, the kind where a door that binds at the strike isn’t just annoying, it’s a symptom of something moving behind it. That’s the difference: we read the door as evidence of what the house is doing, not as an isolated component.
We spec genuine Therma-Tru replacement slabs, frames, sills, and hardware where the assembly is still serviceable, and we use quality aftermarket weatherseal and sweep only where an OEM match isn’t practical. When the frame, sill, or flashing has failed, we tell owners plainly that patching the door is throwing money at a wall problem. Replacement of the full assembly, with corrected flashing, is usually the honest call. Scotts Valley homeowners tend to appreciate that directness, because a lot of them have already paid someone to fix a symptom once.
“Build it right the first time. The second time costs twice as much and nobody’s happy about it.” That’s how we approach every Therma-Tru job in Scotts Valley, from a simple sweep replacement to a full entry re-flash on a ridgeline home.
Styles & brands we work with
Common Therma-Tru Construction Problems We Solve in Scotts Valley
- Fiberglass slab and frame failure at the bottom rail. On shaded canyon lots in Scotts Valley, the sill sits in year-round damp. The jamb legs and threshold wick moisture upward, and the bottom rail delaminates or swells before the door face shows any wear. By the time you notice the sweep dragging, the damage underneath is usually well underway.
- Out-of-square frames on pier-and-post and hillside foundations. Scotts Valley’s graded lots and pier-and-beam floors settle independently of the door opening. A Therma-Tru door that was plumb at install will start binding at the strike and dragging the sweep within a few seasons. We check the frame against the foundation before we blame the door.
- Weatherseal and sweep degradation from the marine-layer-to-dry-wind cycle. Cool damp winters followed by hot, dry late-summer winds dry out and crack perimeter gaskets. The gaps that result are both an air leak and an ember-entry problem on ridgeline homes, which makes this a hazard issue in Scotts Valley, not just a comfort one.
- Flashing and stucco-return failures around the rough opening. On 1960s and 70s canyon-era homes, the original flashing behind the door surround has often failed. Water gets behind the frame and rots the header or sheathing. The door looks fine. The wall behind it doesn’t. We see this constantly in Scotts Valley.
- Therma-Tru patio door roller and track failures from redwood duff and slope debris. Patio and sliding systems on treed lots collect needles and debris in the track, which grinds the rollers and bends the track over time. On hillside decks with movement, the track also loses level, which makes the door harder to operate with every year.
Therma-Tru Service in Scotts Valley: What Local Conditions Mean for Your Equipment
Scotts Valley sits in a narrow redwood-and-sandstone canyon in the Santa Cruz Mountains just off Highway 17. The housing mix runs from 1960s-70s canyon-era ranch homes and redwood-deck cabins tucked into the slopes to newer hillside subdivisions along the 95066 corridor. Many of the older structures sit on pier-and-post foundations with aging wood decks built into graded lots. Longtime locals know that crawl spaces and lower-level walls on the shaded slopes stay damp year-round, and that decks built on older hillside homes often mask rot in the framing.
What that means for a Therma-Tru door is this: the same entry that would last decades on a flat San Jose lot gets hit from below by foundation moisture and from above by wildfire-driven sealing requirements. Scotts Valley’s canyon lots put the same Therma-Tru entry on two hazard lists at once. Shaded redwood slopes keep crawl spaces and lower walls damp year-round while the ridgelines above carry wildfire exposure, so the door has to be detailed for rot and drainage and for Chapter 7A ember-resistant sealing on the same opening. A door replacement in Scotts Valley isn’t a door replacement. It’s a moisture envelope repair and a fire-hardening upgrade that happens to include a door. That dual requirement doesn’t arise 25 minutes down the hill in flat San Jose.
On a canyon-era ranch home off the 95066 corridor, our crew opened up a Therma-Tru Smooth-Star entry that had been dragging for two seasons and found the bottom rail delaminated and the original flashing behind the surround rusted through, with rot in the header sheathing. We pulled the full assembly, replaced the rotted framing, re-flashed the rough opening, and set a new fiberglass entry with ember-resistant perimeter sealing. The door swings clean now and the wall behind it is dry. That’s the job we keep doing in Scotts Valley: not fixing a door, but fixing what the canyon did to the wall around the door.
Therma-Tru Models & Products We Service in Scotts Valley
We service and install the full Therma-Tru line that shows up in Scotts Valley homes: Smooth-Star fiberglass entry doors, the Fiber-Classic collection, Classic-Craft series, and Therma-Tru patio and sliding glass door systems. Sidelites and transoms included. For turnaround speed, we carry common aftermarket weatherseal profiles, Astragal boots, and sweep inserts in our local stock, and we order genuine Therma-Tru slabs and frames direct when the assembly needs a full replacement. If a model is discontinued, we’ll tell you and talk through the closest current equivalent before ordering anything.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in Scotts Valley
Therma-Tru door work in Scotts Valley spans a wide range because the scope depends on what’s behind the door. Here are the line items that typically frame the bid:
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
| Roof Repair | $400 – $1,800 |
What drives the cost on a Therma-Tru job in Scotts Valley isn’t usually the door itself. It’s everything the canyon did around it: rotted header sheathing, a rusted flashing pan, an out-of-square rough opening, maybe a sill pan that was never installed correctly in the first place. A free estimate from us includes a look at the assembly, not just the slab, so the number we give you covers the whole job, not the first surprise. Call (844) 384-3361 to schedule yours.
Serving Scotts Valley, CA — Our Local Coverage Area
We’re based in the Scotts Valley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in Scotts Valley
Usually the foundation, or what the foundation is doing. On Scotts Valley’s pier-and-post and hillside lots, the floor and the door opening settle at different rates, which pulls the frame out of square and makes the door bind at the strike. We check the frame with a level against the floor plane before recommending any door work. If the foundation moved, a new door will bind the same way in a season or two. Call (844) 384-3361 and we’ll measure it.
Yes, depending on what we find when we open the rough opening. In Scotts Valley’s wildfire-prone ridgeline areas, exterior door replacements on older homes often need to meet Chapter 7A ember-resistant standards, which means sealing around the frame, upgraded weatherstripping, and sometimes a compliant door assembly. We handle that as part of the door job, not as a separate surprise. If you’re on a ridge lot, we’ll walk you through what applies before we order anything. Call (844) 384-3361 for specifics.
If the slab is sound and the frame is plumb, a repair usually makes sense: new weatherseal, a sweep, maybe hinge adjustment. If the bottom rail is delaminated, the jamb legs are soft, or the flashing behind the surround has rusted through, repair is a patch on a wall problem. We’ll show you what we found, not just tell you. In Scotts Valley, where damp sills and hillside movement are the norm, we lean toward full assembly replacement more often than a flatland contractor would. Call (844) 384-3361 for an honest assessment.
Yes, and this is where our general contracting scope helps. We handle Full Kitchen Remodeling, Home Addition, and our Home Remodeling in Scotts Valley as one engagement, so a Therma-Tru patio slider can be integrated into a kitchen remodel or an addition without coordinating a separate door crew. We spec the door, frame the opening, flash it correctly for the damp-slope conditions, and install it under the same contract. Call (844) 384-3361 to talk through the plan.
They do, measurably. The marine-influenced mountain climate in Scotts Valley keeps seals saturated for months, then the hot, dry late-summer and fall winds bake them. Perimeter gaskets crack faster here than in San Jose or Santa Cruz. We recommend checking the sweep and weatherstripping every fall on canyon lots, and we stock common aftermarket profiles for quick replacement. Call (844) 384-3361 if you’re seeing daylight around the door.
Service Areas Near Scotts Valley
Beyond Scotts Valley proper, we serve homeowners in nearby communities including Mount Hermon, Felton, Ben Lomond, and the slopes along Highway 17. If you’re in Therma-Tru service in Mount Hermon or Therma-Tru service in Felton, the same canyon conditions apply and we’d be glad to take a look. Our team covers the full Santa Cruz Mountains corridor with the same single-source approach.
Book Your Therma-Tru Service in Scotts Valley Today
If your Therma-Tru door is dragging, sticking, or showing daylight at the sweep, call (844) 384-3361. Estimates are free, and we’ll look at the whole assembly, not just the slab. We serve Scotts Valley, the 95066 and 95067 ZIP codes, and the surrounding mountain communities.
Written by Noel Figueroa, Owner and our General Contractor in Scotts Valley at Workshop Contractors, serving Scotts Valley and the Santa Cruz Mountains since 2010.