Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Redwood City, CA | Workshop Contractors
We install and repair Unilock paver driveways, patios, and retaining walls throughout Redwood City, from the flats of 94063 to the hillside lots of 94062. What separates our Unilock work here from a generic paver installation is that we build for Redwood City’s actual ground conditions: expansive clay on western slope lots, downtown design-review frontages, and older homes where drainage was never corrected. We’re an independent hardscape and Redwood City General Contractor, not a manufacturer-authorized dealer, which means we spec what’s right for your property rather than what clears a showroom quota. Call (844) 384-3361 for a free estimate on Unilock installation or repair anywhere in Redwood City.
Why Redwood City Residents Choose Us for Unilock Service
We’ve built and repaired Unilock systems long enough to know that the paver itself is rarely the problem. It’s what sits underneath it. In Redwood City, that means over-excavating through clay, setting proper geotextile separation, and grading so water moves away from the foundation before a single Brussels Block goes down. Most failed paver driveways we tear out around here have perfectly good units sitting on a base that was never engineered for what the soil does when it gets wet.
Our team is led by Noel Figueroa, who came up in construction the long way – framing first, then finish work, then full-scope remodels and exterior systems. He learned early that the second visit to a Redwood City Home Remodeling job costs more than doing it right the first time. That’s the standard we bring to our Unilock work in Redwood City: base prep you never see but will absolutely pay for later if it’s skipped. We use genuine Unilock units, matching edge restraint, and compatible joint sand so repairs blend into the existing field instead of standing out as patches.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Redwood City
- Heaving and shifting on 94062 hillside lots. The expansive clay along the western edge of Redwood City swells when it rains and shrinks when it dries. If a Unilock driveway or patio was installed directly on that clay without over-excavation and a stabilized base, the pavers move, rock, and eventually crack at the joints. We see this constantly on downslope properties.
- Paver spread at driveway aprons. On Brussels Block driveways that take daily vehicle load, edge restraint fails first. Once the perimeter lets go, pavers spread outward at the apron and the whole field opens up. We reset the edge, recompact the base, and reinstall with fresh restraint that actually holds.
- Efflorescence and trapped moisture on older brick pavers. Town Hall clay-brick pavers, common on pre-1990 Redwood City walkways, develop that chalky white powder when moisture wicks through and evaporates at the surface. The fix isn’t scrubbing – it’s correcting the drainage that’s feeding moisture from underneath, often on driveways that slope toward the house.
- Retaining wall lean on slope-stability lots. Brussels Dimensional and Brusselstone walls fail when geogrid wasn’t engineered to the actual surcharge behind the wall. On Redwood City hillsides, that surcharge is real: saturated soil, downslope pressure, and a home above the wall. We rebuild with grid spec’d to the load, not the brochure.
- Joint sand loss from dry-season dust and rain-season washout. Redwood City’s winter rains move sand out of paver joints fast, and our dry summers leave joints open to weeds and ants. We reapply polymeric sand after compaction so joints stay locked through both seasons.
Unilock Service in Redwood City: What Local Conditions Mean for Your Equipment
Redwood City’s downtown precise plan and design-review standards govern hardscape and paving on infill and mixed-use frontages. That means a Unilock driveway or entry plaza downtown can be reviewed for finish, color, and stormwater treatment in a way that a plain residential replacement in the hills never is. If you’re off Broadway or Middlefield Road in a commercial or mixed-use zone, your paver selection isn’t just a preference – it’s a permit question. We’ve worked through that review process enough times to know which Unilock lines and colors clear design review without back-and-forth, and we build the submittal package so the city sees what they need the first time. On a residential hillside lot in 94062, the inspector cares whether the wall is engineered and the base is right; downtown, they also care whether the paver color matches the streetscape standard. Same paver, two completely different sets of rules within the same city.
Unilock Models & Products We Service in Redwood City
We install and repair the Unilock lines most common in Redwood City: Brussels Block for driveways and patios where a tumbled, dimensional look holds up to vehicle traffic; Beacon Hill for a flagstone-look finish on patios and walkways; Brussels Dimensional and Brusselstone for retaining walls; and Town Hall clay-brick pavers on older homes where matching the existing field matters more than upgrading the look. Unilock sales & service runs deeper than swapping units – we stock edge restraint, joint sand, and cap units locally so repair turnaround doesn’t stall behind a distributor backorder. When a paver field is failing at the base, we rebuild the foundation. If it’s a surface issue, we replace only what’s damaged and blend it into the surrounding field.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Redwood City
What you’ll pay depends on what’s underneath the pavers, not just the paver itself. A flat-lot patio in the 94063 flats is simpler than a downslope driveway in 94062 that needs over-excavation, geotextile, and engineered base. A downtown frontage that requires design-review submittals and stormwater treatment will carry additional soft costs. Here are the ranges we quote most often in Redwood City:
| Unilock Service | Price Range (Redwood City) |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Every estimate is free and line-itemed. You’ll see exactly where the base work, material, and labor dollars go before you sign anything. Call (844) 384-3361 for a written quote – we come out, look at the soil and slope, and give you a number that holds.
Serving Redwood City, CA — Our Local Coverage Area
We’re based in the Redwood City area and know this community well, including Woodside Unilock service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Redwood City
Yes, if the base is engineered for it. The clay in the Redwood City hills swells and shrinks with moisture, so the fix is over-excavation below grade, geotextile fabric separation, and a compacted engineered base that isolates the pavers from the moving soil. On a downslope lot off the 94062 hillside edge, our crew pulled a heaving Brussels Block driveway where the original base sat directly on expansive clay and the pavers had rocked out of plane. We over-excavated, brought in engineered base with geotextile separation, reset the slope to drain away from the garage, and reinstalled the Unilock field with fresh edge restraint – the drive has held flat through two wet seasons. Call (844) 384-3361 if you want us to look at your lot before you commit to a paver driveway.
It can. If your property is in a downtown precise-plan area or a mixed-use frontage, hardscape is reviewed for finish, color, and stormwater treatment as part of the permit process. A plain residential driveway replacement in the neighborhoods doesn’t face the same scrutiny. We prepare the submittal package for review so the city sees what they need the first time. If you’re unsure whether your project falls into a review zone, call (844) 384-3361 and we’ll check the address against the current plan before you spend money on design.
Upfront, concrete is usually cheaper. A poured driveway in Redwood City runs $4,500 – $12,000, while a Brussels Block paver driveway typically lands between $7,000 and $18,000 depending on base conditions. The real difference shows up over ten years: pavers can be lifted and reset when the ground moves, while cracked concrete is a full replacement. On Redwood City’s expansive clay, that matters more than it does in areas with stable soil. For an exact quote on either option, call (844) 384-3361 – the estimate is free.
That’s efflorescence – mineral salts wicking up through the paver as moisture evaporates. On older Town Hall clay-brick walkways and driveways in Redwood City, it usually means water is trapped under the field, often because the slab or base slopes toward the house instead of away. Cleaning the surface won’t stop it. We correct the drainage, then address the staining. If you’re seeing white powder after rain, call (844) 384-3361 and we’ll trace where the water is coming from.
That depends on why it’s failing. If one cap or a single unit is chipped, we replace it. If the wall is leaning, units are separating, or the face is bowing on a Redwood City slope lot, that’s a geogrid or base failure – and patching it block by block just delays the rebuild. Honest repair means excavating behind the wall, checking what’s actually holding the surcharge, and rebuilding to engineered spec. Call (844) 384-3361 and we’ll tell you which situation you’re in after one site visit.
Service Areas Near Redwood City
Beyond Redwood City, we serve the surrounding Peninsula communities with the same Unilock installation and repair work. That includes Unilock service in Emerald Lake Hills where hillside lots carry the same clay concerns, and Unilock service in San Carlos for flat-lot driveways and patio work. We also take on projects from Woodside down through Menlo Park and Atherton – wherever the base prep and drainage matter as much as the paver selection. If you’re doing a project in Redwood City or nearby, call us and we’ll let you know if your address falls in our service area. We are a Redwood City service area contractor first, but we’re not afraid of a short drive up the 280 corridor.
Book Your Unilock Service in Redwood City Today
If your Unilock driveway is heaving, your patio has spread, or you’re planning a new paver installation in Unilock in West Menlo Park or Redwood City, call (844) 384-3361 to schedule a free estimate. We’ll look at your soil, slope, and drainage, then give you a written line-item quote that holds. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Redwood City and the Peninsula since opening our doors.