Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Pacifica
If you’re planning a remodel or addition in Pacifica, the first thing to understand is that this is not an inland jobsite. Salt-laden fog off the Pacific, steep coastal bluffs, and winter storm runoff shape every material decision your project will face. Our team at Workshop Contractors manages that complexity under one contract, from slope drainage to the final fixture. We answer our own phone, we know the Rockaway and Sharp Park neighborhoods by name, and we’ll give you honest pricing before you sign anything. Call (844) 384-3361 for a free estimate on any residential project in Pacifica.
Why Workshop Contractors Is Pacifica’s Preferred General Contractor Company
Pacifica homeowners tend to do their homework, and most of the calls we take start with a specific failure they’ve already lived with: a retaining wall leaning after two wet winters, a deck ledger rusting out, a window frame that won’t stop sweating salt. Our local reputation is built on answers to those exact problems, not on generic renovation pitches. We carry vetted relationships with 50-plus manufacturers, so when a Rockaway homeowner asks whether James Hardie siding meets coastal exposure requirements or which window frame material survives wind-driven spray, we’re working from material data and field experience, not a brochure.
One contractor. Every trade. That’s the promise that matters in Pacifica, where a hillside addition routinely touches drainage, foundation repairs, framing, roofing, windows, and hardscape in a single scope. No finger-pointing between subs, no phone tag. We source and we install. The schedule, the material selection, and the permit coordination stay under our roof from the first site walk to the final inspection.
Styles & brands we work with







Residential General Contractor in Pacifica
Residential General Contractor work in Pacifica is driven less by trends and more by what the coastline does to a house over twenty or thirty years. The mid-century ranchers and split-levels in 94044 were framed solidly, but most went up before modern slope-drainage and seismic standards. That means our scopes here start underground more often than not: footing drains, retaining-wall reinforcement, drainage swales, and hillside stabilization before we ever open a wall for finishes. A whole-home remodel in Pacifica typically runs $14,000 to $45,000 for kitchens and $9,000 to $28,000 for bathrooms, with the coastal-spec materials adding a line item you won’t see on an inland estimate.
Coastal-Spec Materials, Not Inland Shortcuts
We specify hot-dip galvanized and stainless fasteners, marine-grade rail posts, and sealed paver joints on every bluff-top and beachside job. The inland-spec version costs less on paper. In Pacifica, it rusts through within a few winters, and then you’re paying twice.
Scope Starts With Drainage Here
On a Pacifica hillside, the recurring failure isn’t the roof or the framing. It’s saturated soils loading the retaining walls and foundation drainage before the structure is stressed. We front-load drainage and slope stabilization in the scope, then build.
Hire a General Contractor in Pacifica
When you hire a General Contractor in Pacifica, you’re making a decision about who owns the full picture: permits, geotechnical issues, material sourcing, and the sequence of trades. A home addition in Pacifica runs $45,000 to $130,000. An ADU runs $90,000 to $220,000. Those ranges reflect the real costs of building on coastal bluffs and hillside lots with proper drainage, seismic detailing, and coastal-spec materials. If a bid comes in dramatically lower, ask what’s being cut. Usually, it’s the hardware and drainage work you’ll wish you’d paid for.
Single Contract, Clear Accountability
We manage the entire engagement under one contract. One schedule, one team, one point of accountability. We don’t hand you a list of subs to coordinate. We hand you a finished job.
Materials Stay In-House
Because we source across roofing, windows, cabinetry, surfaces, fixtures, fencing, hardscape, and prefab-ADU categories, the material decisions don’t get outsourced to a showroom you’ve never met. We’ll show you Cambria next to Caesarstone, Kohler next to Moen, and explain the trade-offs in real terms for a Pacifica house, not a showroom.
Trusted Brands We Service in Pacifica
Our Pacifica clients get direct access to material lines that hold up in a salt-fog climate. For kitchens and baths, we install Caesarstone and Cambria surfaces and Kohler, Moen, and Blanco fixtures, and we’ll steer you toward the finishes that don’t pit or corrode near the coast. We keep local stock availability in mind for Pacifica projects so you’re not waiting on a fabricator three states east. Fast, informed decisions, not a three-week hold pattern.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Pacifica Homes
- Salt-air corrosion on exterior hardware: Original galvanized nails, plain-steel joist hangers, and unsealed railings rust through decades before the surrounding wood fails. We re-hang and re-spec with hot-dip galvanized and stainless fasteners.
- Under-scoped drainage on hillside lots: Winter storm runoff saturates soils, and retaining walls and foundations take the load. The cheap scope treats it as a framing job. We treat it as a drainage job first.
- Rot and mold on window frames and siding: Wind-driven salt spray and persistent fog drive moisture into unprotected frames and siding. Coastal-spec window frames and properly flashed siding assemblies matter more here than almost anywhere else on the Peninsula.
- Failing paver joints and fence posts on exposed lots: Untreated fence posts and unsealed joints fail early near Rockaway and Sharp Park. We spec sealed joints, marine-grade posts, and corrosion-resistant hardware.
Pricing for General Contractor in Pacifica, CA
Pacifica pricing includes a coastal-spec line item that inland estimates leave out. That’s the honest truth, and it’s why a Pacifica roof replacement runs $8,000 to $20,000 while the same square footage in San Bruno might cost slightly less. The table below shows our market-calibrated ranges for Pacifica. What moves the number: slope conditions, drainage requirements, and how much of the existing structure was built before modern seismic standards. We give you a written, line-item estimate before you sign. No change orders on materials we already specified.
| Project | Pacifica Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Call (844) 384-3361 to schedule a free estimate. We’ll walk the site, check the drainage, and give you numbers that reflect Pacifica’s actual conditions, not a flat-rate formula.
We Also Serve Cities Near Pacifica
Our crews work throughout the northern Peninsula, including San Bruno, Broadmoor, Colma, and South San Francisco. If you’re just over the hill or down the coast, we’ll bring the same coastal-spec discipline. Our General Contractor team serves the whole region, and our General Contractor in Pacifica work keeps us on these hillsides every week.
Serving Pacifica, CA — Our Local Coverage Area
We’re based in the Pacifica area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Pacifica
The coastal-spec version costs more because you’re paying for hot-dip galvanized and stainless fasteners, marine-grade rail posts, sealed paver joints, and properly flashed window installations instead of electro-galvanized hardware and unsealed materials. The inland-spec version saves 10 to 20 percent on paper and rusts through within a few winters. In Pacifica, the cheap spec is the expensive spec. Call (844) 384-3361 for an exact breakdown on your project; estimates are free.
Not every project, but most hillside and bluff-top lots in 94044 do. If your property has a retaining wall, a downhill slope, or a history of water in the crawlspace, we’ll likely front-load drainage and slope stabilization. On flatter lots near Sharp Park and Rockaway, the structural work may be less extensive, but we’ll still check the foundation drainage before we frame. Call (844) 384-3361 and we’ll tell you what your specific lot actually needs.
We pull all permits for you and manage the inspections through the coastal development review process where it applies. Pacifica’s shoreline jurisdiction and San Andreas Fault proximity mean some projects need geotechnical review, and we coordinate that with the city. You don’t chase paperwork. Call (844) 384-3361 and we’ll walk you through what your project triggers.
One contract. Fixed, line-item pricing on materials we’ve already specified. No change orders because we under-scoped something. The scope includes the drainage, the fasteners, the fixtures, and the labor. If a dispute starts, it usually starts with an ambiguous spec. We write it down. Call (844) 384-3361 and we’ll show you a sample contract before you commit.
Yes. The beachside cottages in Sharp Park take direct wind-driven salt spray, and unprotected window frames and railings fail fast there. We install coastal-spec frames and marine-grade rail posts on any lot within sight of the water. Call (844) 384-3361 for a material breakdown specific to your cottage.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Pacifica and the northern Peninsula.