Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Moss Beach, CA | Workshop Contractors
We’re an independent PGT service provider serving Moss Beach, CA, and one thing separates our work here from what we do inland, including PGT in El Granada: we treat every PGT window and door on this fog-bound coast as a moisture-management problem first and a hardware problem second. Our crews know the WinGuard and Premier Vinyl lines well enough to diagnose whether a dragging slider needs OEM rollers or whether the rough opening behind it has started to rot. For PGT repair, replacement, or new installation in Moss Beach, call (844) 384-3361.
Why Moss Beach Residents Choose Us for PGT Service
I’m Noel Figueroa, and I learned framing and finish work from the same generation of tradesmen who built half the houses on my street in Ontario, California. That early training stuck with me: measure twice, cut once, and never cover up rot with a pretty trim board. We carry that same discipline into every PGT job in Moss Beach, because the marine layer here punishes shortcuts faster than almost anywhere else on the San Mateo County coast.
Most Moss Beach homes sit in the fog belt, where salt-laden air and seasonal dampness work on window frames, door rollers, and glazing gaskets around the clock. We’ve spent years servicing PGT units in this climate, and we’re honest about what that means: when a PGT sash is fogged or a slider drags, we diagnose the actual failure before recommending repair or replacement. We keep OEM PGT parts on hand for supported series and quality aftermarket sealed units for older ones, so a Moss Beach homeowner isn’t waiting weeks for a simple re-glaze.
We’re a single-source our General Contractor in Moss Beach, not a specialty subcontractor. That matters when PGT work reveals what’s behind the trim: damp framing, failed flashing, a sill that’s been holding water. We don’t hand you off to someone else. We fix the opening, set the unit, and flash it properly, all under one contract.
Reach us at PGT sales & service to talk through what you’re seeing on your windows or doors.
Styles & brands we work with
Common PGT Construction Problems We Solve in Moss Beach
- Fogged insulated glass on fog-facing walls. North and west elevations in Moss Beach never fully dry out, so the desiccant inside a PGT IGU gives out early and the glass fogs. We see this constantly on the Fitzgerald Marine Reserve side of town. The fix is re-glazing with a fresh sealed unit, not replacing a perfectly sound frame.
- Salt-pitted aluminum on impact units. PGT WinGuard aluminum frames facing the bluff take a beating from onshore air. The finish blisters, the frame pits, and hardware corrodes. If the frame is still structurally sound, we clean, treat, and replace hardware with OEM components. If it’s pitted through, full replacement is the only durable call.
- Dragging or leaking PGT sliders. Grit from coastal winds gets into roller tracks, and standing water in puddle tracks seizes rollers. Doors drag, then leak at the sill. We pull the panel, clean or replace rollers and track, and set the sill flashing right so it drains instead of holding water.
- Corner seal and gasket failure on vinyl sashes. Moss Beach’s damp-UV cycling softens vinyl weld joints and glazing gaskets ahead of schedule, especially on west-facing elevations. Moisture tracks in at the corner and starts the rot clock. We re-gasket where the sash is sound and re-glaze where the weld has failed.
- Rot in the rough opening behind PGT units. The marine layer keeps framing damp, and a failed window or door gasket feeds that damp for years. When we pull a PGT unit in Moss Beach, we check the rough opening for rot before we set anything back. It’s the difference between a repair that holds and one that fails in two seasons.
PGT Service in Moss Beach: What Local Conditions Mean for Your Equipment
Moss Beach is unincorporated San Mateo County land inside the Coastal Zone. That’s not a zoning footnote; it changes how every PGT window and door replacement gets scoped and scheduled. A project that changes an opening typically routes through County Building & Safety plus Coastal review rather than a city counter, which can stretch a straightforward swap into a longer permit timeline than a comparable PGT in Half Moon Bay job. Homeowners who don’t plan for that end up with materials sitting in a garage and a job that can’t start.
On the ground, the housing stock compounds the issue. Most homes here are mid-century or older coastal cottages, cabins, and modest single-family homes, many near the bluff. The original rough openings were rarely flashed to modern standards, and decades of fog and salt have done their work. We routinely find that the PGT window or door itself failed because the opening failed first. That’s why our PGT work in Moss Beach always starts with a check of what’s behind the unit, not just what’s on it. We cover the whole Moss Beach service area including the bluffside streets and the neighborhoods near the reserve.
PGT Models & Products We Service in Moss Beach
We service the PGT lines most common on the San Mateo County coast: WinGuard aluminum impact windows and sliding glass doors, WinGuard Vinyl single-hung and casement windows, the Aluminum Series sliding glass doors, and Premier Vinyl sliding glass doors. For supported series, we use OEM PGT sash, roller, gasket, and hardware. For older or discontinued lines, we source quality aftermarket sealed units and weatherstripping that match the original specs.
In Moss Beach, our stock profile leans toward what this climate demands: heavy-duty rollers, marine-grade hardware, and gaskets and seals sized for coastal moisture loads. If a PGT unit needs a part we don’t have on the truck, we can usually have it within a few days rather than weeks, because we’ve built relationships with regional PGT distributors over years of coastal work.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Moss Beach
What you’ll pay depends on what’s actually wrong and whether you’re repairing or replacing. Here are the ranges we quote for the most common PGT-related work in the 94038 ZIP and surrounding Moss Beach area:
| Service | Typical Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
Several things move the number: whether the opening needs re-flashing, whether rot repair is required, how many units are involved, and whether Coastal review adds time to the schedule. Our free estimates are line-item, in writing, and based on what we find when we look at the job in person. Call (844) 384-3361 for an exact quote on your Moss Beach PGT project; estimates are free.
Serving Moss Beach, CA — Our Local Coverage Area
We’re based in the Moss Beach area and know this community well, and we also handle PGT in Pacifica. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Moss Beach
Yes, if the replacement changes the opening size or structural framing, it typically needs a San Mateo County permit plus Coastal Zone review. A straight same-size swap may not, but we verify before we start. Call (844) 384-3361 and we’ll tell you what your specific window or door triggers.
Moss Beach’s persistent marine layer keeps north and fog-facing walls damp most of the year, so the desiccant inside the insulated glass unit saturates and the seal fails early. It’s a known coastal failure mode, not a defect in your specific window. We re-glaze with fresh IGUs rather than replacing whole frames when the frame is still sound.
If the panel and track are intact but rollers are seized and the sill flashing is failing, repair usually makes sense: we replace OEM rollers, clean or swap the track, and re-set the sill so it drains. If the frame is pitted or the glass is blown, replacement may cost less than repeated repairs. Call (844) 384-3361 and we’ll give you an honest read.
Yes. Bluff-facing homes get constant salt-laden onshore air that pits aluminum frames and blister finish faster than inland installs. We see it most on the bluffside streets near the reserve. If the pitting is surface-level, we treat and replace hardware; if it’s structural, we recommend full-unit replacement.
Usually, yes. We can source matching PGT series for units still in production and use dimensional-matched aftermarket units for discontinued lines. Matching coastal-aged finishes takes care, but we do it regularly in Moss Beach. Call (844) 384-3361 for a free estimate.
Service Areas Near Moss Beach
We work throughout the coastal and inland communities around Moss Beach, including PGT service in San Bruno and PGT service in Montara. Our crews also cover nearby areas like Half Moon Bay, El Granada, and Pacifica. If your home sits in the fog belt, we know what your PGT units are up against.
Book Your PGT Service in Moss Beach Today
On a bluffside cottage near the Fitzgerald Marine Reserve, we pulled PGT WinGuard sliders and casements that were fogging and dragging. Salt air had pitted the tracks and the IGU seals were gone on the north wall. We checked the rough openings, re-flashed, re-set them with OEM gaskets and hardware, and re-glazed the salvageable sashes rather than tearing out every window. The fog-side wall seals tight and the sliders run clean. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Call (844) 384-3361 today to schedule your free PGT estimate in Moss Beach.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Moss Beach and the San Mateo County coast since 2008.