Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Aromas, CA | Workshop Contractors
We provide independent CGI construction service across Aromas, covering everything from CGI Select Series siding repairs to Foundation Series connector replacements and full kitchen remodels that incorporate CGI materials. The one thing that makes our CGI work here different is simple: we know which county inspects your property, and we detail every board, connector, and fastener for fog-heavy coastal air that doesn’t let up from June through August. Call (844) 384-3361 for a free estimate on any CGI project in the 95004 area.
Why Aromas Residents Choose Us for CGI Service
We’ve been working with CGI products long enough to know where they fail and why, and Aromas gives us plenty of both. The marine layer that sits over this valley most summer mornings is hard on engineered wood siding, and the transition from damp mornings to hot afternoon sun is exactly the cycle that causes edge checking and finish chalking. Noel Figueroa, our owner and general contractor, learned framing from the same generation of tradesmen who built half the houses on his street in Ontario, and he carries that old-school standard into every CGI job we run: if the flashing isn’t right, the siding doesn’t go up. We’re not authorized by CGI, but we’ve installed and repaired enough of their material in this climate to know what holds up and what needs extra attention. When you call us, you get a contractor who can explain the difference between a fastener that’s failing and one that’s just noisy.
Styles & brands we work with
Common CGI Construction Problems We Solve in Aromas
Most CGI issues we see in Aromas aren’t material defects. They’re installation details that didn’t account for what this valley throws at a house. Here’s what we deal with most often:
- Moisture swelling and edge checking in CGI Select Series siding. The fog that rolls off the Elkhorn Slough and settles over Aromas keeps siding damp for hours every morning. Without proper back-venting and flashing, that moisture wicks into the board edges, and you get swelling, checking, and eventually rot at the butt joints. We see this on older ranch houses where siding was nailed directly to the sheathing.
- Corrosion in CGI Foundation Series connectors. On well-house and crawlspace installs, especially on older acreage properties with unsealed crawl spaces, the damp marine air accelerates oxidation on steel connectors. We’ve pulled Simpson-style CGI hangers that looked fine from the outside and were paper-thin at the nail holes once we got them off. In Aromas, we spec hot-dipped galvanized or stainless when the connector sits anywhere near ground contact or open venting.
- Premature fading and chalking of CGI WeatherPro trim. When the fog burns off around midday, the summer sun here is direct and intense, and it beats on south- and west-facing trim. Finishes that would last a decade in Monterey can chalk out in six or seven years on an exposed Aromas hillside. We repaint with coatings rated for high-UV coastal exposure, and we’ll tell you honestly when a full trim replacement makes more sense than another repaint.
- Loose or squeaky CGI DeckLoc fasteners. Aromas has plenty of uneven terrain, and when a deck gets built without proper joist spacing or on posts that have settled, those hidden fasteners start working loose. You get board movement, squeaks, and eventually fastener pull-out. The fix usually means pulling the deck boards, correcting the joist layout, and reinstalling with proper blocking.
- Roof leaks at CGI-related penetrations and flashing transitions. After a rainy winter, we get calls about leaks that trace back to flashing details where siding meets roof lines or where deck ledger boards attach. The combination of wet winters and fog means any flashing gap stays wet for months. We fix the leak and the detail that caused it.
CGI Service in Aromas: What Local Conditions Mean for Your Equipment
Here’s something you won’t find on a generic CGI page or a city directory: Aromas is split across Monterey, San Benito, and Santa Cruz counties, and your address alone determines which county building department has jurisdiction over your project. That matters for CGI work more than most people realize. A kitchen remodel on one side of Carpenteria Road might fall under Monterey County’s inspection schedule, while a home addition a quarter mile away falls under San Benito’s code cycle, which can be a full code revision behind or ahead. The structural connector specs, the siding attachment details, even the roof repair scope can shift depending on which inspector walks your job. We confirm jurisdiction before we pull permits on every CGI structural or roofing project in Aromas, because getting that wrong means failed inspections, rework, and delays that cost real money. Our team has managed this tri-county permitting dance for years, and we’ve learned which details each county’s inspectors actually scrutinize. For example, San Benito County is particular about seismic strapping on additions, while Monterey County inspectors focus on weather-tightness details on exterior siding transitions. That knowledge gets baked into our material choices and installation sequencing before the first board gets ordered.
CGI Models & Products We Service in Aromas
We work with the full CGI residential line: Select Series engineered wood siding, WeatherPro exterior trim, Foundation Series structural connectors, and DeckLoc hidden deck fasteners. When we need replacement parts, we source OEM CGI components for anything structural, because load ratings don’t transfer to aftermarket steel. For flashing, sealants, and weather barriers around those CGI products, we use aftermarket materials that outperform the OEM in this coastal climate. It’s a repair-before-replace philosophy on every job. If the CGI siding has a minor moisture issue at the bottom course, we’ll replace the affected boards and correct the flashing rather than pushing a full re-side. If a DeckLoc fastener has failed because of joist spacing, we fix the framing and reuse the good fasteners. That’s the kind of judgment that saves Aromas homeowners real money, and it’s why we keep a stock of common CGI profiles and connector sizes available for fast turnaround on repairs across the 95004 area.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Aromas
Here’s what you can expect to budget for common CGI-related projects in Aromas. These ranges reflect what we see across this market, accounting for tri-county permit costs, material availability, and the extra detailing our coastal climate requires.
| Project Type | Typical Range in Aromas |
|---|---|
| Kitchen Remodel (with CGI trim and siding scope) | $14,000 – $45,000 |
| Roof Repair (CGI-related flashing, leaking transitions) | $400 – $1,800 |
| Home Addition (CGI siding, connectors, trim) | $45,000 – $130,000 |
Your price depends on scope, access, county permit fees, and whether we’re repairing existing CGI material or installing new product. Every estimate we provide is a written line-item quote, so you see exactly where the money goes. Call (844) 384-3361 to schedule a free estimate, and we’ll walk the property with you, confirm your jurisdiction, and give you a number you can actually plan around.
Serving Aromas, CA — Our Local Coverage Area
We’re based in the Aromas area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Aromas
Yes, and which county you’ll deal with depends entirely on your address, not on which town you feel closest to. We confirm jurisdiction before any structural or roofing work begins, because Aromas properties straddle all three counties and the permit requirements are not the same across the lines. Call (844) 384-3361 with your address and we’ll tell you which building department has your file.
The fog acts as a daily moisture cycle, and if the installation lacks proper back-venting and flashing, CGI engineered wood will absorb that moisture and start swelling at the edges. The fix is in the detailing: rain-screen principles, proper gap spacing, and flashing that directs water away from the board ends. We have repaired enough fog-damaged CGI siding in Aromas to know exactly which details fail and how to correct them.
Yes, we repair roof leaks on CGI-related flashing transitions, penetrations, and deck ledger attachments throughout Aromas. Most leaks we trace back to a flashing detail that was never right to begin with, and we fix both the leak and the underlying problem. Call (844) 384-3361, and we’ll get someone out to assess it.
Kitchen remodels in Aromas run $14,000 to $45,000 depending on scope, cabinet selection, countertop material, and whether we’re addressing CGI siding or trim on exterior walls as part of the work. Every project gets a written line-item quote before we start, so there are no surprises. Call (844) 384-3361 and we’ll walk your kitchen with you.
CGI Select Series can perform well in Aromas, but it has to be installed with proper back-venting, flashing, and clearance details to handle the fog. If it’s installed like standard lap siding, it will fail here. We’ll give you an honest assessment of whether CGI is the right call for your specific property, or whether a different siding product makes more sense given your exposure and budget.
Service Areas Near Aromas
We serve Aromas and the surrounding communities across the tri-county region, including CGI service in Gilroy, CGI service in Elkhorn, Watsonville, Prunedale, and Royal Oaks. If you’re unsure whether we cover your property, just call (844) 384-3361 and ask. We also maintain a full Aromas service area page with details on our coverage, and our CGI sales & service page covers the broader product line we support.
Book Your CGI Service in Aromas Today
On a ranch property off Valencia Road, we replaced CGI Select Series siding that had swelled and checked from years of fog exposure because the original installation lacked proper back-venting. We removed the compromised boards, installed new CGI siding with a rain-screen detail and upgraded flashing. That house is weather-tight now, and the homeowner doesn’t think about the next rainy season. If your CGI siding, trim, or roofing is showing fog damage in Aromas, call (844) 384-3361 to schedule your free estimate. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Aromas and the tri-county area. Grew up in the Vineyard neighborhood of Ontario, California, where he learned framing from the tradesmen who built the street, and has spent the decades since doing finish work that holds up under a second look.