CGI Construction in Gilroy, CA

CGI Construction in Gilroy, CA | Workshop Contractors

We’re an independent general contractor that services and installs CGI cabinetry and countertops across Gilroy, CA, including the 95020 and 95021 ZIP codes. Our CGI work here is shaped by one thing most cabinet installers never check: Gilroy sits on the Calaveras and San Andreas fault system, which means the floor framing and cripple walls below your kitchen matter just as much as the cabinet box sitting on top of them. We check the substrate first, then set the cabinets. Call (844) 384-3361 to schedule a free estimate.

Call (844) 384-3361

Why Gilroy Residents Choose Us for CGI Service

We’ve spent years working on CGI cabinetry, countertops, and the kitchens and baths built around them in Gilroy’s older downtown blocks and its 1990s – 2000s tract-home subdivisions on the east and south edges, and we bring that same experience to our San Martin CGI service. We know how CGI boxes, door hardware, and finishes actually hold up under this valley’s heat and seismic movement. We’re not a CGI dealer or authorized agent, and that’s deliberate. We quote what the job needs rather than what a brand program wants us to push. Noel Figueroa, our owner and general contractor, learned framing from the same generation of Inland Empire tradesmen who built half the houses on his street, and he brings that same eye to every CGI cabinet run we set in Gilroy: square the substrate, shim what’s off, and anchor to structure, not drywall.

Our clients choose us because we carry CGI sales & service knowledge that comes from actual installs, not a product catalog. We match hardware to the series, source OEM-compatible parts when they’re available, and tell you straight when a reface will hold and when the box needs replacing.

Common CGI Construction Problems We Solve in Gilroy

• Delaminating thermofoil and laminate door faces. Gilroy’s hot, dry summers and seasonal temperature swings cause CGI thermofoil and laminate doors to peel at the edges, especially on cabinets facing west or south windows. The heat breaks down the adhesive bond along the door profile first, so the peel starts at the corner and works inward. We replace the door fronts with series-matched pieces rather than patching, because a patch always telegraphs through under direct sun.
• Swollen particleboard boxes at the toe kick and under-sink base. CGI particleboard-box RTA cabinets sweat and swell when slow winter leaks or dishwasher moisture go unnoticed. In Gilroy, winter rains expose drainage problems fast, and the under-sink cabinet is the first casualty. The box swells before the door ever shows a problem. We assess whether the cabinet can be dried, shimmed, and re-sealed or whether the base unit needs to come out before new countertops go on.
• Worn soft-close hinges and dragging drawer glides. Heavy daily use wears out the soft-close mechanisms on CGI frameless and framed lines. Doors lose alignment, drawers drag against the face frame, and the hardware fails long before the box itself does. We match hinges, glides, and shelf pins to the actual CGI series rather than dropping in generic replacements that won’t line up with the boring pattern.
• Racked and binding cabinets in older downtown homes. In Gilroy’s early-1900s to 1950s wood-frame homes, out-of-plumb walls and unlevel floors cause CGI cabinet runs to rack and bind. Owners read it as a cabinet defect when it’s really a substrate and shim issue. We solve it by leveling and bracing before the boxes go in.
• Cripple-wall movement under islands and long runs. Along Gilroy’s downtown core and older blocks, the 1989 Loma Prieta quake left floor framing and cripple walls with movement that never got fully corrected. A heavy quartz island set on a soft or unbraced floor will rock, rack, and pull away from the wall within a season. We check the framing first.

CGI Service in Gilroy: What Local Conditions Mean for Your Equipment

The 1989 Loma Prieta earthquake was centered in the Santa Cruz Mountains directly above Gilroy, and it cracked chimneys and unreinforced masonry through the downtown core. Most of Gilroy’s growth came later, in the 1990s and 2000s subdivisions that were engineered but not retrofitted for seismic movement. That combination means construction work here is dominated by retrofit scopes: foundation bolting, cripple-wall bracing, shear-wall additions. For CGI owners, that’s not a side note. When we set CGI cabinets and islands in those older blocks, we check cripple-wall and floor framing first, because a cabinet run anchored to a soft or unbraced floor will rack and pull away from the wall within a season. You won’t get that check from an installer who only works in flat, stable inland suburbs like those who handle Morgan Hill CGI service. It’s the difference between a kitchen that looks right for six months and one that still reads square after the next shaker.

CGI Models & Products We Service in Gilroy

We service the full range of CGI lines: Ready-to-Assemble (RTA) shaker and raised-panel cabinets sold through big-box and online channels, pre-assembled all-plywood series used in mid-range kitchen refits, framed and frameless box lines with soft-close hardware for partial kitchen remodels, and CGI quartz and granite countertop slabs and prefab tops for island and vanity installs. We stock common installation hardware locally so Gilroy jobs don’t stall waiting on a hinge shipment. When OEM replacements are discontinued, we source quality aftermarket glides that match the boring pattern and weight rating of the original hardware. Where a CGI box has swelled or delaminated from moisture, we tell owners honestly whether a door-and-hardware refresh will hold or whether the base cabinet needs replacing before new tops go on.

CGI Service Pricing in Gilroy

FAQs – CGI Construction in Gilroy

Why do my CGI cabinet doors peel at the edges in Gilroy? Gilroy’s hot, dry summers and strong seasonal temperature swings cause the adhesive bond on thermofoil and laminate door faces to fail, starting at the corners and working inward. We replace the door fronts with series-matched CGI pieces, which is the only fix that holds up under direct west- or south-facing sun.

My CGI base cabinet under the sink swelled after a slow leak – can it be saved? It depends on how far the swelling has spread. If the damage is limited to the toe kick or a single panel, we can sometimes dry, shim, and re-seal it. If the box has lost structural integrity, the base unit needs replacing before new countertops go on. Call (844) 384-3361 and we’ll take a look.

Do old downtown Gilroy homes need seismic work before new CGI cabinets go in? Often yes. Many early-1900s to 1950s homes in downtown Gilroy still carry floor framing and cripple walls with quake-era movement. Anchoring a heavy cabinet run or quartz island to a soft floor means racked doors and pulled-away runs within a season. We check the framing first and brace where needed.

Can CGI cabinets go into a 1990s east-side Gilroy tract home without major prep? Usually yes. Those production homes were engineered on stable slabs with predictable wall framing. We still check plumb and level before setting boxes, but the prep work is typically minor compared to the older downtown blocks.

Do you only install CGI cabinets, or can you source other brands? We service and install CGI as an independent contractor, but we also source cabinets from KraftMaid and Wellborn, countertops from Cambria, Caesarstone, and Silestone, and fixtures from Kohler, Grohe, Toto, and Moen. You’re not locked into one manufacturer. Call (844) 384-3361 to talk through options.

Service Areas Near Gilroy

We serve Gilroy and the surrounding communities, including CGI service in Las Lomas, CGI service in Pajaro, Woodcrest, North Tustin, and Orange. If you’re outside the immediate Gilroy area, call and we’ll confirm coverage. Our Gilroy service area spans both 95020 and 95021.

Book Your CGI Service in Gilroy Today

One contractor. Every trade. We handle CGI cabinets, countertops, backsplash, and the full kitchen remodel around them, from the roof down to the pavers. Build it right the first time. The second time costs twice as much and nobody’s happy about it. Call (844) 384-3361 to schedule your free estimate in Gilroy.

Written by Noel Figueroa, Owner at Workshop Contractors, serving Gilroy since our first retrofit and cabinet jobs in the older downtown core, as well as CGI repair in San Juan Bautista.