Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Irvine, CA | Workshop Contractors
We provide independent CWS cabinet and countertop service across Irvine, from full kitchen remodels to hardware replacement and quartz top setting. What makes our CWS work different here is simple: we pull your village’s CC&Rs and approved finish list before ordering a single door front, because Irvine’s design-review process rejects specs that would sail through in neighboring cities. Call (844) 384-3361 for a free estimate.
Workshop Contractors is not a CWS dealer or manufacturer affiliate. We’re a licensed general contractor who has installed and repaired CWS cabinetry inside Irvine’s HOA-governed tracts for years, so we know where these boxes fail and how to fix them without fighting the approval process. CWS sales & service is one of our core competencies, and our familiarity with the line runs deep enough that we can usually tell you what a repair will involve just from the door style and cabinet age.
Why Irvine Residents Choose Us for CWS Service
Most Irvine kitchens built between the late 1970s and mid-2000s went in as tract packages, and a lot of those packages were CWS. We’ve opened enough of them to know the failure points by heart: thermofoil skins that peel at the bottom rails in west-facing kitchens, toe kicks that swell after slow supply-line leaks, drawer glides that bind once the box is racked out of square. That pattern recognition means we diagnose quickly and quote honestly.
Noel Figueroa, our owner and general contractor, learned framing and finish work the old way. He grew up in Ontario’s Vineyard neighborhood, trained through Chaffey College’s construction technology program, and has spent decades working residential and commercial projects across the region. Around Ontario, people know him for trim that actually meets the corner and framing that’s square. That standard carries into every CWS job we run in Irvine, because a cabinet that’s installed a quarter-inch out of level shows up as a chip in the countertop two years later.
Styles & brands we work with
Common CWS Construction Problems We Solve in Irvine
- Thermofoil and laminate door skins peeling along bottom rails. Irvine’s semi-arid climate means hot, dry summers, and kitchens with west-facing windows get direct afternoon sun for years. That surface heat cycling breaks down the adhesive on CWS door skins, and the peel always starts at the bottom rail where steam from the dishwasher below adds moisture. We replace the door fronts and address ventilation where it makes sense.
- Swollen particleboard and MDF box cores at toe kicks and sink bases. Most 1980s-to-2000s Irvine tract kitchens still have their original shutoffs, and slow supply-line leaks behind an untouched cabinet go unnoticed until the base starts swelling. We cut out and rebuild the damaged box, replace the offending shutoff, and level the run before anything else goes back on.
- Drawer glide and hinge failures on full-overlay doors. When a CWS cabinet gets racked out of square, usually by a slab or subfloor that shifted, the soft-close hardware binds and eventually fails. Replacing a hinge without re-squaring the box just burns the new hardware. We level first, then install OEM CWS hardware or quality aftermarket soft-close replacements when OEM parts are discontinued.
- Quartz and granite tops de-bonding at seams or chipping at sink cutouts. Irvine slab homes often have slightly sloped floor plates near the garage, and if the underlying CWS cabinet run wasn’t leveled to compensate, the stone top carries the stress. Seam de-bonding and sink-cutout chips are the visible result. We pull the top, level the run, and reset the stone with a fresh cutout when needed.
- Design-review rejections on new CWS cabinet specs. Every Irvine village has its own approved architectural palette, from door style to finish color. A CWS kitchen that would pass in Tustin or Anaheim can get bounced by a Northwood or Woodbridge design-review committee. We pull the CC&Rs before ordering so you don’t pay for a spec that never had a chance.
CWS Service in Irvine: What Local Conditions Mean for Your Equipment
Irvine is a master-planned city built almost entirely after 1970 by the Irvine Company, and that single fact changes how CWS work plays out here more than any climate or housing-stock factor. Every village, from Quail Hill to Westpark to Turtle Rock, carries its own CC&Rs and its own architectural palette. Cabinet finishes, door styles, and even hardware finishes sit inside that approved list. A homeowner in Anaheim can order whatever kitchen fits their budget. An Irvine homeowner can get a clean city permit and still have the HOA send the whole spec back because the door style doesn’t match the village’s approved profile. We learned this the hard way on a late-1990s tract home off Culver Drive in the 92604 ZIP, where a rebuilt CWS thermofoil kitchen had to clear design review before final sign-off. Now we pull the village CC&Rs and the approved finish list before ordering a single cabinet door. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
CWS Models & Products We Service in Irvine
We work on the CWS lines most common in Irvine tract homes and townhome remodels: the Frameless Euro-style full-overlay cabinetry with soft-close hinges and melamine or thermofoil door fronts, the Shaker and raised-panel wood door lines, the CWS quartz and granite countertop programs paired with their cabinet packages, and the vanity and bath cabinetry spec’d into condos and attached units. When a box is sound and only hardware has failed, we install OEM CWS hinges, glides, and door fronts. When OEM parts are discontinued, we move to quality aftermarket soft-close hardware rather than resurrecting worn originals. And when a CWS box has a wet core or de-laminated panels, we tell you straight: refacing won’t fix it, and full replacement is the better spend. We keep common CWS hardware stocked for fast Irvine turnaround, and oddball parts usually arrive within a few days.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Irvine
CWS cabinet and countertop work in Irvine is priced by scope, not by line item theater. A small hardware fix costs far less than a full kitchen rebuild, and the village review process occasionally adds time but not cost. Here are the ranges we quote for CWS-related work across Irvine:
| Service | Price Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Your free estimate includes a site visit, a written line-item scope, and a check of your village’s design-review requirements so the number doesn’t move after approval. Call (844) 384-3361 to schedule one.
Serving Irvine, CA — Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Irvine
Can you match a new CWS cabinet run to cabinets already in my Irvine townhome? In most cases, yes. We spec replacement CWS door fronts and boxes to match the existing line, and we check the village’s approved finish palette before ordering so the new run clears design review.
Is Workshop Contractors an authorized CWS dealer? No. We’re an independent general contractor and CWS service provider. We hold no manufacturer affiliation, which means we recommend either OEM or aftermarket parts based on what’s best for the job, not what a brand program tells us to push.
Do you use OEM CWS parts on repairs? When a box is sound and only hardware has failed, we install OEM CWS hinges, glides, and door fronts. When OEM parts are discontinued, we install quality aftermarket soft-close hardware that matches the original spec.
How long does CWS cabinet or countertop work take in Irvine? Hardware-only repairs are usually done in a day. Door-front replacements take a few days including ordering. Full kitchen remodels with CWS cabinetry and stone tops typically run several weeks, and the village design-review step adds time before anything gets ordered. Call (844) 384-3361 for a timeline based on your specific village.
How much does CWS cabinet replacement cost in Irvine? Cabinet installation runs $4,000 – $13,000 depending on run length and door style. A full CWS kitchen remodel with quartz tops runs $14,000 – $45,000. Estimates are free, and we include the design-review check so the number stays stable. Call (844) 384-3361 for an exact quote.
Service Areas Near Irvine
We run CWS service throughout Irvine service area and into Woodcrest, North Tustin, Orange, and Anaheim. For homes further north and east, we also cover CWS service in Westminster and CWS service in Rancho Santa Margarita.
Book Your CWS Service in Irvine Today
If you’re in Irvine and need CWS cabinets repaired, replaced, or spec’d for a full remodel, call (844) 384-3361. We’ll schedule a free estimate, check your village’s CC&Rs, and give you a written scope before you spend a dollar on materials.
Written by Noel Figueroa, Owner and General Contractor at Workshop Contractors, serving Irvine since his first CWS kitchen rebuild off Culver Drive.