Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Colma
Colma isn’t like the rest of the Bay Area. The town sits in the fog belt between Daly City and the bay, and that means cool, damp, salt-laden air works on every fastener, frame, and fence post 300 days a year. A general contractor in Colma who specifies inland materials will hand you a repair bill inside a decade. We build for that. Our crews know the El Camino Real corridor, the Mission Street edge, and the civic and commercial buildings that make up most of Colma’s actual construction work. If you’re planning a re-roof, a showroom build-out, a monument pad, or a window replacement on a dealership or funeral home, call (844) 384-3361. We’ll walk the site, check what’s corroding, and give you a written scope built for this specific air.
Why Workshop Contractors Is Colma’s Preferred General Contractor Company
Colma has almost no traditional residential stock. The buildable land between the cemeteries is dominated by commercial corridors, light industrial buildings, and the town’s civic structures, most of it mid- to late-20th-century construction. That means the contractors who do well here understand commercial envelopes, not just single-family remodels. We’ve spent years working that specific mix: dealership service bays, funeral-home chapels, columbarium footings, showroom storefronts. Our General Contractor team treats each of these as what it is – a building with real structural loads, moisture exposure, and occupancy requirements. Noel Figueroa, who runs Workshop Contractors, reviews every scope before it goes to the client. That’s not a formality. It’s so the allowance lines for things like archaeological monitoring on ground disturbance are in the bid on day one, not discovered when the job stops.
One contract, one schedule, one name on the paperwork. When you hire us as your General Contractor in Colma, you’re not coordinating a roofing crew on Tuesday and a fence crew on Thursday. We source and install across the full envelope and interior, and every trade answers to the same schedule.
Styles & brands we work with







General Contractor Services in Colma
General Contractor Services in Colma cover the full envelope and build-out scope for a town that is mostly commercial, civic, and monument construction. When a Colma property owner needs a roof replaced on a showroom, impact windows installed on a chapel, a columbarium foundation poured, or an ADA-compliant ramp built on the El Camino Real corridor, the work has to account for fog-belt corrosion, soil that triggers cultural monitoring, and permit review specific to this small town. A typical commercial roof replacement in Colma runs $8,000 – $20,000, and metal roof installation runs $15,000 – $40,000, depending on deck condition and fastener spec. Impact window installation runs $8,000 – $25,000, and aluminum fence installation runs $4,000 – $10,000, with the coastal-spec hardware we call for pushing materials toward the upper end of every range. The cheap version of any of these jobs is the one that needs redoing in eight years.
Commercial Envelope and Roofing
Fog-belt salt air is brutal on roofing fasteners and edge metal. We specify hot-dip galvanized and stainless fasteners on every re-roof in Colma, with marine-grade edge metal at eaves and rakes. Skimp there and the nail heads chalk out and snap inside the sheathing long before the shingle warranty runs.

Ground Disturbance and Site Work
Colma’s soil is sandy, drained, and full of older interments. Any ground disturbance – a columbarium footing, a showroom ADA ramp, a sign pier – triggers a mandatory archaeological and cultural monitor. Our schedules are built around the monitor’s availability, not the crew’s. We don’t treat that as a surprise.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Construction Company in Colma
As a Construction Company working in Colma, we handle the kind of projects that define this town: dealership build-outs on El Camino Real, funeral-home renovations, monument and mausoleum structural work, and the occasional civic or utility building repair. The first sentence of any Colma bid has to answer one question: what does this air do to this building over twenty years? If the answer isn’t in the spec, the bid is fiction. A paver driveway installation in Colma runs $7,000 – $18,000; a concrete driveway installation runs $4,500 – $12,000; a vinyl fence installation runs $3,500 – $9,000. Those prices assume sealed paver joints, vapor barriers where warranted, and post bases that won’t rot out in damp soil. When a Colma property owner hires us, they’re hiring material fluency, not just labor.
Fog-Resistant Window and Fence Work
Window replacement in Colma runs $4,500 – $15,000, and we push toward impact-rated frames with marine-grade hardware wherever the building sits in the wind-driven damp. Fence posts here need to be set in concrete with stainless post anchors, not buried bare in damp ground. You’ll see the difference in three years; you’ll pay for the difference in ten.
Commercial Interior Build-Outs
When we build out a dealership office or a funeral-home reception area, we use moisture-rated drywall, mold-resistant assemblies, and ventilation that moves damp air out instead of trapping it. Colma’s climate never lets a wall fully dry on its own. The assembly has to help.
Trusted Brands We Service in Colma
We install and service across the brands Colma property owners ask for by name: Caesarstone for commercial and residential counter surfaces, Kohler and Moen for commercial washroom and break-room fixtures, and Blanco for stainless sinks and prep surfaces in service areas and back-of-house builds. We also source our roofing from GAF, CertainTeed, and Owens Corning, and our pavers from Belgard and Unilock. No single-manufacturer upsell. You tell us the brand tier you want – premium or practical – and we run the trade-off conversation from experience. We keep common replacement parts and hardware on our Colma job sites whenever possible, because waiting on a fastener order when fog is rolling in costs everyone a day they won’t get back.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Colma Homes
- Electro-galvanized fasteners failing early. The inland spec is cheaper on bid day, but in Colma’s salt air, electro-galvanized nail heads chalk out and snap within a few fog seasons. We specify hot-dip galvanized or stainless, period.
- Untreated or poorly set fence posts rotting at grade. Colma’s soil stays damp. A post set bare in that soil rots at the transition point. We set posts in concrete with stainless anchors and slope the concrete away.
- Inland-grade caulk failing on window perimeters and paver joints. Wind-driven damp pushes moisture behind cheap sealant. We use marine-grade sealant on window perimeters and polymer-stabilized joint sand on pavers.
- No allowance for the archaeological monitor. Colma’s ground-disturbance rules are non-negotiable. When a bid omits the monitor line, the job stops mid-footing. We build that cost and that schedule pause into every ground-touching scope.
Pricing for General Contractor in Colma, CA
Everything in Colma costs a little more than the same square footage in San Mateo, and here’s the honest reason: the coastal spec is more expensive on day one, and the inland spec is more expensive by year ten. You choose which bill you want. The table below shows our current Colma ranges. Call (844) 384-3361 and we’ll give you a written, line-item quote for your specific building, not a round number off a brochure.
| Service | Colma Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Roof Repair | $400 – $1,800 |
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
What moves the number: deck condition on a re-roof, whether a window opening needs reframing for impact-rated glass, how much ground disturbance a footing requires, and whether the archaeological monitor has to be on site for two days or five. We write all of that into the scope before the first permit is pulled. Estimates are free.
We Also Serve Cities Near Colma
Our crews work throughout the northern San Mateo County fog belt. We serve Broadmoor, Daly City, South San Francisco, and Pacifica, in addition to our General Contractor work across the wider Bay Area. If your building sits anywhere along the 280 or Highway 1 corridor and you’re tired of watching fasteners rust, call us.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Colma
The difference is the fastener and edge-metal spec. A Colma commercial re-roof runs $8,000 – $20,000, and the upper end of that range usually reflects hot-dip galvanized or stainless fasteners, marine-grade drip edge, and sometimes re-sheathing where salt air already compromised the deck. In San Mateo, further from the fog belt, a contractor can spec a standard fastener package and pass. In Colma, that standard package is a future warranty claim. On a showroom re-roof along El Camino Real, our crew pulled the original fasteners and found them chalky and snapping off in the sheathing after two decades of fog-belt salt air. We re-sheathed the affected runs and reset the roof with hot-dip galvanized and stainless fasteners and marine-grade edge metal. We wrote the upgrade into a signed change order before the dry-in, and the roof passed inspection sign-off without a single re-driven fastener. That’s the coastal spec. Call (844) 384-3361 and we’ll show you exactly what it costs for your roof.
Yes, if the scope wasn’t built for it. Colma’s soil is essentially cemetery substrate – sandy, drained, and culturally sensitive. Any ground disturbance, even a columbarium footing or a showroom ADA ramp, triggers a mandatory archaeological and cultural monitor. That’s not a request; it’s a stop-work condition if you skip it. We build the monitor’s availability into the schedule from day one, and we include the allowance line in the bid. If your current bid doesn’t mention it, the bidder hasn’t worked in Colma properly. Call (844) 384-3361 for a scope that accounts for it.
We pull them, we name the permit office in the scope, and we don’t start ground work until the cultural monitor clearance is written into the permit packet. An El Camino Real dealership or funeral-home build in Colma is a commercial project with commercial code review – fire suppression, occupancy, ADA access, structural. We handle the full permit path: submittal, corrections, inspections, sign-off. One contract, one team accountable for all of it. Call (844) 384-3361 and ask us about a specific address.
Impact-rated or marine-grade window frames with stainless hardware, and fence posts set in concrete with stainless post anchors. Window replacement in Colma runs $4,500 – $15,000; impact-rated units push toward $8,000 – $25,000. Aluminum fence installation runs $4,000 – $10,000; vinyl runs $3,500 – $9,000. The material that fails here is the inland default: electro-galvanized hardware, untreated posts, mild-steel railings. We don’t spec those in Colma. Ever. Call (844) 384-3361 for a quote built around what actually lasts.
In writing, before the work starts, with the owner signing off on every dollar. On a Colma showroom or monument job, the typical change orders are: re-sheathing discovered after tear-off, a cultural monitor’s schedule shifting by a day or two, and a client upgrading fixtures mid-project. We price each one as a signed change order before the crew touches it. No verbal add-ons, no end-of-job surprises. Noel Figueroa reviews every change order personally. If you want a contractor who treats the allowance schedule as part of the contract, not an afterthought, call (844) 384-3361.
Written by Noel Figueroa, Owner at Workshop Contractors, serving Colma and the northern San Mateo County fog belt.