Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Ontario, CA | Workshop Contractors
Ameristar construction service in Ontario means diagnosing why cabinets and roofing components fail here specifically, not just swapping parts. We’re an independent General Contractor in Ontario, not an Ameristar authorized dealer, and we work on Ameristar by Masco cabinetry, hardware, and roofing accessory components in post-war tract homes south of Holt Blvd and 1990s – 2000s subdivisions across north Ontario. Call (844) 384-3361 and we’ll tell you straight whether your Ameristar install can be repaired or needs real replacement.
Why Ontario Residents Choose Us for Ameristar Service
Noel Figueroa grew up in the Vineyard neighborhood of Ontario, where half the houses on his street were built by tradesmen who handed him his first framing hammer. He learned the fundamentals at Chaffey College’s construction technology program and has spent decades working the Inland Empire on everything from ground-up residential builds to commercial tenant improvements. That matters when we open a 1990s Ameristar cabinet run and the slab underneath has shifted.
We know which Ameristar by Masco cabinet lines were used in Ontario builder kitchens, which hinge types strip out first, and which door styles are still available as OEM replacements. We’ve also pulled enough Ameristar roofing components in Ontario wind zones to know when the underlayment is the failure point and the shingles are fine. That diagnostic fluency saves you from paying for work that doesn’t address what’s actually failing. Build it right the first time. The second time costs twice as much and nobody’s happy about it.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Ontario
- Cabinet box delamination and hinge pull-out. Ontario summers push past 100°F for weeks, and cabinet boxes near attics or exterior stucco walls bake in that cycle for years. The particleboard cores in older Ameristar base and wall boxes dry out, the screw holes strip, and doors start sagging. We replace stripped side-mounts with higher-grade aftermarket soft-close hardware or install new door fronts if the box core is still sound.
- Raised-panel stile and rail separation. Inland-valley humidity swings pull Ameristar raised-panel oak and maple doors apart at the joints, particularly in older south-Ontario tract homes where cabinets back onto stucco walls that radiate heat into the cabinet cavity all summer. We reset separated panels and re-glue joints where the door is worth saving.
- Drawer glide wear and rail sag on original builder-grade boxes. Twenty-plus years of daily use takes its toll on standard Ameristar side-mount glides. In Ontario’s 1990s – 2000s north- and east-side planned communities, we regularly see full kitchen drawer banks where every glide is worn and the rails have sagged. We replace glides throughout and re-align drawer fronts so they close flush.
- Failed finish and edge-banding breakdown at the toe kick. Ontario’s expansive clay shifts slabs, especially in the slab-on-grade homes south of downtown. When cabinets sit tight to a floor that has moved, water wicks at the toe kick, edge banding frays, and the finish breaks down. We fix the leveling issue first, then repair or replace the affected cabinet components.
- Roofing accessory failures paired with shingle systems. Ameristar-engineered drip edge, vents, and flashing components fail at different rates than the GAF or Owens Corning shingle systems they sit under. We diagnose the whole assembly, not just the visible layer.
Ameristar Service in Ontario: What Local Conditions Mean for Your Equipment
Many post-war south-Ontario homes were built slab-on-grade with shallow footings over expansive clay, which means Home Remodeling – Ontario contractors routinely open a kitchen wall to find cracked slabs and floors that are a half-inch out of level. That reality changes how Ameristar cabinet work goes in Ontario compared to a place like Upland or Rancho Cucamonga. Before a single Ameristar box goes in, the slab has to be checked, the run has to be shimmed and leveled, and sometimes the floor has to be floated. Newer north-Ontario subdivisions with post-tension slabs don’t demand that prep step, but in the older neighborhoods around downtown and south of Holt Boulevard, skipping it means doors that bind, drawers that slide open on their own, and hinge screws that strip out again in two years. We’ve corrected enough of those jobs to know the prep is the job.
Ameristar Models & Products We Service in Ontario
We work on Ameristar by Masco kitchen cabinet lines common in 1990s – 2000s builder kitchens: raised-panel oak and maple door styles, base and wall cabinet boxes with standard overlay hinges and side-mount drawer glides, and Ameristar decorative hardware including pulls, knobs, and roll-out trays. We also service Ameristar-engineered roofing underlayment and accessory components, including drip edge, vents, and flashing paired with GAF and Owens Corning shingle systems. Where the Ameristar line is still supported, we source OEM hinges, glides, and door fronts. Where the core material is already failing, we recommend higher-grade aftermarket hardware or full replacement boxes. The call is always honest, never a sales pitch.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Ontario
What drives Ameristar cabinet and component pricing in Ontario is the condition of the slab underneath and whether we’re repairing, refacing, or replacing. A simple hinge and glide refresh on a small kitchen costs far less than re-leveling a cracked slab and rebuilding an entire run. Here’s what Ontario homeowners can expect:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
Every free estimate includes a cabinet-level inspection, a slab and floor check where relevant, and a line-item written quote. Call (844) 384-3361 to schedule yours.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well, including Ameristar repair in Chino and surrounding areas. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Ontario
Usually we can match the original Ameristar door style if the line is still supported, and in many Ontario kitchens we save the entire run. The question is whether the cabinet box core is still solid. If the particleboard hasn’t swollen or delaminated, we replace hinges, re-set door fronts, and you keep your kitchen. If the boxes are failing, refacing would just dress up a problem that’s going to keep getting worse. We’ll show you the difference before you spend anything. Call (844) 384-3361 for an honest read on your cabinets.
In Ontario’s older slab-on-grade neighborhoods, cabinets sit crooked because the slab underneath has shifted on expansive clay, not because the cabinets were installed wrong. South of Holt Blvd and around downtown, this is one of the most common issues we see, though we also handle Ameristar in San Antonio Heights. The fix starts with leveling the floor and shimming the cabinet run before we touch a hinge or glide. Newer north-Ontario subdivisions with post-tension slabs rarely have this problem. Call (844) 384-3361 and we’ll check your slab and cabinet alignment.
Yes, and we see it in specific places. Ontario summers push past 100°F for weeks, and when Ameristar particleboard boxes sit against exterior stucco walls or under hot attic spaces, the core dries out, screw holes strip, and hinges pull. Santa Ana winds don’t affect cabinets directly, but the same heat cycle that drives those winds also ages cabinet finishes and speeds delamination. It’s why Ontario installs fail faster than identical cabinets in coastal cities. Call (844) 384-3361 to have us look at what’s actually failing in your kitchen.
Yes, and that’s often the right call for these homes. The north and east Ontario planned communities used Ameristar builder cabinets that are usually structurally sound, with boxes still square and doors serviceable. We reface with new Ameristar or upgraded door fronts, replace the worn side-mount glides with soft-close hardware, and install new countertops. You get a modern kitchen without gutting the room. Call (844) 384-3361 and we’ll tell you if refacing makes sense for your layout.
It depends on the scope. Cabinet refacing, hinge replacement, and countertop installation typically don’t require permits in Ontario. Full kitchen remodels that move plumbing, electrical, or bearing walls do, and we pull all required permits and schedule inspections. We won’t cut corners on code, especially given California’s seismic requirements in older Ontario buildings. Call (844) 384-3361 for a scope review and we’ll tell you exactly what your project needs.
Service Areas Near Ontario
We run Ameristar service across the Inland Empire, including Ameristar service in Upland and Ameristar service in Montclair. For broader coverage, see our Ontario service area and Ameristar sales & service pages.
Book Your Ameristar Service in Ontario Today
Call (844) 384-3361 to schedule a free Ameristar cabinet and component inspection in Ontario. We’ll diagnose what’s failing, give you a straight repair-or-replace recommendation, and quote the work in writing.
Written by Noel Figueroa, Owner & General Contractor at Workshop Contractors, serving Ontario and the Inland Empire.